70-841-007

70-841-007 Datasheet

Astec Connector Kit #70-841-007, includes all of the above

Part	Datasheet
70-841-007	70-841-007 (pdf)

PDF Datasheet Preview
110 Watts LPS110 Series Total Power 80-110 Watts Input Voltage 85-264 VAC 120-300 VDC # of Outputs Single Special Features • Universal input • High efficiency • Remote sense • Built-in EMI filter • Low output ripple • Adjustable output • Power fail • Overvoltage protection • Overload protection • Optional L bracket -B suffix • Cover kit available LPX110-C Environmental Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity Operating non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational Storage temperature -40° to 85°C Temperature coefficient per °C MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI filter Safety ground leakage current Output Maximum power Adjustment range Hold-up time Overload protection Overvoltage protection Logic Control Power failure Remote sense 85-264 VAC 120-300 VDC 47-440 Hz <18 A peak 115 VAC <36 A peak 230 VAC, cold start 25°C A max. RMS 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted mA 50/60 Hz, 264 VAC-input 80 W for convection 110 W with 30 CFM forced air ±5% minimum 20 ms W load, 115 VAC nominal line Short circuit protection. Case overload protected 110-145% above peak rating 5 V output VDC. Other outputs 10% to 20% above nominal output. Latching type, recycle AC to reset. Safety VDE UL CSA NEMKO BABT CB CE 0805/EN60950 IEC950 UL1950 CSA Level 3 EN 60950/EMKO-TUE 74-sec 203 EN60950/BS7002 Certificate and report Mark LVD 11774-3336-1245 LC #84997 E132002 LR53982C P95100376 PS/605827 1563, 1564, 1565, 1566, 1567 100 America’s USA 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley Ordering Information Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30 CFM Forced Air Peak Load1 Regulation2 Ripple P/P PARD 3 LPS113 LPS114 LPS115 LPS118 ±2% ±2% ±2% ±2% Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a µF capacitor at rated line voltage and load. Note -B suffix added to model number indicates L bracket option. -B Bracket 120 mV 150 mV 240 mV 480 mV Pin Assignments ConnectorLPS113 LPS114 LPS115 LPS118 SK1-1 SK1-3 SK1-5 GND Neutral Line GND Neutral Line GND Neutral Line GND Neutral Line SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK2-7 SK2-8 SK2-9 SK201-1 SK201-2 SK202-1 SK202-2 +12 V +12 V +12 V Common +12 V +12 V +sense -sense Pok GND +15 V +15 V +15 V Common +15 V +15 V +sense -sense Pok GND +24 V +24 V +24 V Common +24 V +24 V +sense -sense Pok GND +48 V +48 V +48 V Common +48 V +48 V +sense -sense Pok GND Mating Connectors AC Input: Molex 09-50-8051 USA 09-91-0500 UK PINS 08-58-0111 DC Outputs: Molex 09-50-8091 USA 09-91-0900 UK PINS 08-58-0111 Remote sense/power fail Molex 22-01-1022 USA 22-01-1023 UK PINS 08-50-0114 Astec Connector Kit #70-841-007, includes all of the above Notes Specifications subject to change without notice. All dimensions in inches mm , tolerance is Specifications are for convection rating at factory settings unless otherwise stated. Mounting holes M1 and M2 should be grounded for EMI purposes. Mounting hole M1 is safety ground connection. L Bracket mounting 6-32 maximum insertion depth is Warranty 1 year Weight lb / kg

PDF Datasheet Preview

110 Watts

LPS110 Series

Total Power 80-110 Watts Input Voltage 85-264 VAC
120-300 VDC # of Outputs Single

Special Features
• Universal input
• High efficiency
• Remote sense
• Built-in EMI filter
• Low output ripple
• Adjustable output
• Power fail
• Overvoltage protection
• Overload protection
• Optional L bracket -B suffix
• Cover kit available LPX110-C

Environmental

Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C

Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3

Humidity Operating non-condensing 5% to 95%

Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational

Storage temperature -40° to 85°C

Temperature coefficient per °C

MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions

Electrical Specs

Input

Input range Frequency Inrush current

Input current Efficiency EMI filter

Safety ground leakage current

Output

Maximum power Adjustment range Hold-up time Overload protection

Overvoltage protection

Logic Control

Power failure

Remote sense
85-264 VAC 120-300 VDC 47-440 Hz <18 A peak 115 VAC <36 A peak 230 VAC, cold start 25°C A max. RMS 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted
mA 50/60 Hz, 264 VAC-input
80 W for convection 110 W with 30 CFM forced air ±5% minimum 20 ms W load, 115 VAC nominal line Short circuit protection. Case overload protected 110-145% above peak rating 5 V output VDC. Other outputs 10% to 20% above nominal output. Latching type, recycle AC to reset.

Safety

VDE UL CSA NEMKO

BABT CB CE
0805/EN60950 IEC950 UL1950 CSA Level 3 EN 60950/EMKO-TUE 74-sec 203 EN60950/BS7002 Certificate and report Mark LVD
11774-3336-1245 LC #84997 E132002 LR53982C P95100376

PS/605827 1563, 1564, 1565, 1566, 1567
100 America’s USA 1-888-41-ASTEC

Europe UK 44 1384 842-211

Asia HK 852-2437-9662

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley
Ordering Information

Model Number

Output Voltage

Minimum Load

Maximum Load with Convection Cooling

Maximum Load with 30 CFM Forced Air

Peak Load1

Regulation2

Ripple P/P PARD 3

LPS113

LPS114

LPS115

LPS118
±2%
±2%
±2%
±2%

Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a µF capacitor at rated line voltage and load. Note -B suffix added to model number indicates L bracket option.
-B Bracket
120 mV 150 mV 240 mV 480 mV

Pin Assignments

ConnectorLPS113 LPS114 LPS115 LPS118

SK1-1 SK1-3 SK1-5

GND Neutral Line

GND Neutral Line

GND Neutral Line

GND Neutral Line

SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK2-7 SK2-8 SK2-9 SK201-1 SK201-2 SK202-1 SK202-2
+12 V +12 V +12 V Common +12 V +12 V +sense -sense Pok GND
+15 V +15 V +15 V Common +15 V +15 V +sense -sense Pok GND
+24 V +24 V +24 V Common +24 V +24 V +sense -sense Pok GND
+48 V +48 V +48 V Common +48 V +48 V +sense -sense Pok GND

Mating Connectors

AC Input:

Molex 09-50-8051 USA 09-91-0500 UK PINS 08-58-0111

DC Outputs:

Molex 09-50-8091 USA 09-91-0900 UK PINS 08-58-0111

Remote sense/power fail Molex 22-01-1022 USA 22-01-1023 UK PINS 08-50-0114

Astec Connector Kit #70-841-007, includes all of the above

Notes Specifications subject to change without notice. All dimensions in inches mm , tolerance is Specifications are for convection rating at factory settings unless otherwise
stated. Mounting holes M1 and M2 should be grounded for EMI purposes. Mounting hole M1 is safety ground connection. L Bracket mounting 6-32 maximum insertion depth is Warranty 1 year Weight lb / kg

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 70-841-007 Datasheet file may be downloaded here without warranties.

Datasheet ID: 70-841-007 518831