Astec connector kit #70-841-017, includes al of the above.
Part | Datasheet |
---|---|
![]() |
70-841-017 (pdf) |
PDF Datasheet Preview |
---|
145 Watts LPQ142 Series Total Power 110-145 Watts Input Voltage 85-264 VAC 120-300 VDC # of Outputs Quad Electrical Specs Input Input range Frequency Inrush current Efficiency EMI filter Power factor Safety ground leakage current 85-264 VAC, 120-300 VDC 47-63 Hz 38 A max, cold start 25°C 75% typical at full load Meets FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted typical mA 50/60 Hz, 264 VAC input Special Features • Active power factor correction • IEC EN61000-3-2 compliance • Adjustable outputs on 1, 3 & 4 Remote sense on main output • Single wire current sharing • Power fail and remote inhibit • Built-in EMI filter • Low output ripple • Overvoltage protection • Overload protection • Thermal overload protection • Adjustable floating 4th output • Optional cover -C suffix • Optional fan cover -CF suffix Environmental Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C Electromagnetic susceptibility designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Humidity Operating non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational Storage temperature -40° to 85°C Temperature coefficient ± per °C MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions Output Maximum power Adjustment range Hold-up time Overload protection Overvoltage protection Logic Control AC Power failure Remote inhibit Remote sense DC Ok 80 W convection 60 W with cover-C 145 W with 30 CFM forced air 100 W with cover-C - 5.5V on main -12 - 15V on 3rd output - 25 V on 4th output 20 ms W load at nominal line Short circuit protection on all outputs. Case overload protected 110-145% above peak rating Tracks outputs 1, 3 & 4 10 to 35% VDE UL CB CSA CE NEMKO Safety 60950 Certificate and report 60950 Mark LVD EN 60950/EMKO-TUE Americas 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 Ordering Information Model Number LPQ142 Output Voltage Minimum Load 5 V - V 12 V -12 V -12 -15 V Maximum Load with Convection Cooling 12 A 5A 1A A Maximum Load with 30 CFM Forced Air 25 A 6A A Peak Load 27 A 9A 2A 5A Regulation2 ±2% ±3% ±3% ±3% Ripple P/P PARD 3 50 mV 120 mV <1% <50mV or 1% Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a µF capacitor at rated line voltage and load ranges. 4th output adjustable V factory set at 5 V. *Minimum loads are required when output set below 5 Volts Remote inhibit resets OVP latch Note -C suffix added to the model number indicates cover option. -CF suffix added to the model number indicates fan cover option. Pin Assignments Connector LPQ142 PIN 1 PIN 3 PIN 5 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 TB-1 TB-2 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN 9 PIN 10 |
More datasheets: AF512CFI-OEM | AF8GCFP3-OEM | AF8GCFI-OEM | AF4GCFI-OEM | AF1GCFI-OEM | AF2GCFI-OEM | 161A18309X | 1186 | BC8-12-T1 | BC8-12-T2 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 70-841-017 Datasheet file may be downloaded here without warranties.