PTV03010WAD

PTV03010WAD Datasheet

PTV03010

Part	Datasheet
PTV03010WAD	PTV03010WAD (pdf)

PDF Datasheet Preview
PTV03010 Vin single output DC-DC CONVERTERS POLA Non-isolated • 8 A output current • V input voltage • Wide-output voltage adjust Vdc to Vdc • Auto-track sequencing* • Pre-bias start-up • Efficiencies up to 93% • Output ON/OFF inhibit • Vertical through-hole mounting • Point-of-Load-Alliance POLA compatible • Undervoltage lockout • Available RoHS compliant The PTV03010 is a non-isolated dc-dc converter from Artesyn under the Point of Load Alliance POLA standard. The vertical mounting option of the PTV03010 module provides performance in less than 20% of the space that is required by alternative solutions. The Auto-Track feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled powerup and power-down. The PTV03010 has an input voltage of Vdc to Vdc and offers a wide Vdc to Vdc output voltage range with up to 8 A output current, which allows for maximum design flexibility and a pathway for future upgrades. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 100 µF and 10 µF Ceramic , Cout = 0 µF 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability See Note 4 Setpoint accuracy See Note 8 Line regulation ±5 mV typ. Load regulation ±5 mV typ. Total regulation See Note 8 Minimum load Ripple and noise 20 MHz bandwidth 20 mV pk-pk Temperature co-efficient -40 ºC to +85 ºC Transient response See Note 5 70 µs recovery time Overshoot/undershoot 100 mV INPUT SPECIFICATIONS Input voltage range See Note 3 Input standby current Remote ON/OFF See Note 1 Undervoltage lockout Increasing Track input current Pin 5 See Note 6, 7 Vdc 10 mA typ. Positive logic V typ. mA EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS

PDF Datasheet Preview

PTV03010

Vin single output

DC-DC CONVERTERS POLA Non-isolated
• 8 A output current
• V input voltage
• Wide-output voltage adjust Vdc to Vdc
• Auto-track sequencing*
• Pre-bias start-up
• Efficiencies up to 93%
• Output ON/OFF inhibit
• Vertical through-hole mounting
• Point-of-Load-Alliance POLA compatible
• Undervoltage lockout
• Available RoHS compliant

The PTV03010 is a non-isolated dc-dc converter from Artesyn under the Point of Load Alliance POLA standard. The vertical mounting option of the PTV03010 module provides performance in less than 20% of the space that is required by alternative solutions. The Auto-Track feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled powerup and power-down. The PTV03010 has an input voltage of Vdc to Vdc and offers a wide Vdc to Vdc output voltage range with up to 8 A output current, which allows for maximum design flexibility and a pathway for future upgrades.

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 100 µF and 10 µF Ceramic , Cout = 0 µF
2 YEAR WARRANTY

SPECIFICATIONS

OUTPUT SPECIFICATIONS

Voltage adjustability

See Note 4

Setpoint accuracy

See Note 8

Line regulation
±5 mV typ.

Load regulation
±5 mV typ.

Total regulation

See Note 8

Minimum load

Ripple and noise
20 MHz bandwidth
20 mV pk-pk

Temperature co-efficient -40 ºC to +85 ºC

Transient response See Note 5
70 µs recovery time Overshoot/undershoot 100 mV

INPUT SPECIFICATIONS

Input voltage range

See Note 3

Input standby current

Remote ON/OFF

See Note 1

Undervoltage lockout Increasing

Track input current

Pin 5 See Note 6, 7

Vdc 10 mA typ.

Positive logic V typ. mA

EMC CHARACTERISTICS

Electrostatic discharge Conducted immunity Radiated immunity

EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3

GENERAL SPECIFICATIONS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PTV03010WAD Datasheet file may be downloaded here without warranties.

Datasheet ID: PTV03010WAD 518487