PTHxx050Y Vin
Part | Datasheet |
---|---|
![]() |
PTH05050YAD (pdf) |
Related Parts | Information |
---|---|
![]() |
PTH12050YAD |
![]() |
PTH12050YAZT |
![]() |
PTH12050YAZ |
![]() |
PTH12050YAST |
![]() |
PTH05050YAZT |
![]() |
PTH05050YAZ |
![]() |
PTH03050YAZT |
![]() |
PTH03050YAD |
![]() |
PTH03050YAZ |
![]() |
PTH03050YAST |
PDF Datasheet Preview |
---|
Embedded Power for Business-Critical Continuity PTHxx050Y Vin Total Power Watts # of Outputs Single Special Features • VTT bus termination output the system VREF • 6 A output current 8 A peak • 5, or 12 Vdc input voltage • DDR and QDR compatible • ON/OFF inhibit for VTT stand- by • Under-voltage lockout • Operating temperature range: -40 °C to +85 °C • Efficiencies up to 88% • Output overcurrent protection non-latching, auto-reset • Point-of-Load-Alliance POLA compatible • Available RoHS compliant • 2 Year Warranty Specifications Input current Input voltage range: Undervoltage lockout PTH03050Y PTH05050Y PTH12050Y Input capacitance See Note 4, page 3 Remote ON/OFF: No load PTH03050Y PTH05050Y PTH12050Y 10 mA - Vdc - Vdc - Vdc Vin increasing Vin decreasing V typ., V max. V min., V typ. Vin increasing Vin decreasing V typ., V max. V min., V typ. Vin increasing Vin decreasing V typ., V max. V min., V typ. PTH03050Y & PTH05050Y 470 µF PTH12050Y 560 µF Active high All specifications are typical at nominal input, VREF = V, full load at 25 °C unless otherwise stated Cin, Co1, C Co2 = typical value Safety • UL/cUL CAN/CSA-C22.2 No. 60950 File No. E174104 • TÜV Product Service EN60950 Certificate No. B 04 06 38572 044 • CB Report and Certificate to IEC60950, Certificate No. US/8292/UL Embedded Power for Business-Critical Continuity Specifications Continued Ordering Information Output Power max Input Voltage - Vdc - Vdc - Vdc VTT Range - Vdc - Vdc - Vdc Output Currents ±6A ±6A ±6A Part Number System with Options PTH05050YAST Product Family Point of Load Alliance Compatible Efficiency max 88% 88% 85% 9, 10 PTH03050Y PTH05050Y PTH12050Y Packaging Options No Suffix = Trays T = Tape and Reel 8 Input Voltage 03 = V, 05 = 5 V and 12 = 12 V Output Current 05 = 6 A Mechanical Package Always 0 Mounting Option 9 D = Horizontal Through-Hole RoHS 6/6 H = Horizontal Through-Hole RoHS 5/6 S = Surface-Mount Solder Ball RoHS 5/6 Z = Surface-Mount Solder Ball RoHS 6/6 Pin Option A = Through-Hole Std. Pin Length A = Surface-Mount Tin/Lead Solder Ball Output Voltage Code Y = DDR Module Notes 1 Rating is conditional on the module being soldered to a 4 layer PCB with 1 oz. copper. See the SOA curves or contact the factory for appropriate derating. The PTH03050Y and PTH05050Y require no dearting up to 85 °C operating temperature and natural convection airflow. 2 Up to 10 ms pulse period at 10% maximum duty. 3 This control pin has an internal pull-up to the input voltage Vin. If it is left open-circuit the module will operate when input power is applied. A small low-leakage < 100 nA MOSFET is recommended for control. For further information, consult Application Note 4 An input capacitor is required for proper operation. The capacitor must be rated for a minimum of 300 mA rms 750 mA rms for 12 V input of ripple current. 5 The typical value of external output capacitance value ensures that afoyr be possible when the measured peak change in output current is consistently less than 3 A. Test conditions were 15 A/µs load step, A to A. 5 This is the calculated maximum. The minimum ESR limitation will often result in a lower value. Consult Application Note 178 for further details. 6 This is the typical ESR for all the electrolytic non-ceramic output capacitance. Use 7 mΩ as the minimum when using max-ESR values to calculate. 7 Tape and reel packaging only available on the surface-mount versions. 8 To order Pb-free RoHS compatible surface-mount parts replace the mounting option ‘S’ with ‘Z’, e.g. PTHXX050YAZ. To order Pbfree RoHS compatible through-hole parts replace the mounting option ‘H’ with ‘D’, e.g. PTHXX050YAD. 9 NOTICE Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at to find a suitable alternative. Embedded Power for Business-Critical Continuity Characteristic Data AMBIENT TEMPERATURE ºC 80 70 OUTPUT CURRENT C Nat conv Figure 1 - Safe Operating Area Vin = V, VREF = V, Iout = 6 A See Note A |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PTH05050YAD Datasheet file may be downloaded here without warranties.