PSE1000PFC

PSE1000PFC Datasheet

PSE1000-PFC

Part	Datasheet
PSE1000PFC	PSE1000PFC (pdf)

PDF Datasheet Preview
Embedded Power for Business-Critical Continuity PSE1000-PFC 1000 Watts PFC Front End Total Power 1000 W # of Outputs Single Output 390 V 1 of 4 Special Features • 1000 W output power • Unity power factor correction • x 1” • 119 Watts per cubic inch • Industrial safety • -40 °C to 85 °C • High efficiency 94% typical • Negative enable function • Output OTP, OVP and power limit • Current sharing and monitoring • MIL-STD-810F for shock and vibration Compliance • EMI Class B with external filter • EN61000 lunity • RoHS 2 Electrical Specifications Input Input 90 - 264 Vac Operating 115/230 Vac Nominal Frequency: 47 - 63 Hz Inrush current: 50 A peak at 230 Vac 25 deg C with external resistor from INRUSH pin to OUTPUT - Power factor: > typical Input current: A RMS max input current, at 115 Vac Hold up time: 16 ms minimum, at 115 Vrms AC input, full load with 680 uF/450 Vdc electrolytic capacitor Efficiency: > 94% typical at full load / 230 VAC nominal ON/OFF power switch Remote negative enable Isolation: PRI-Chassis 1500 Vac Safety • UL • cUL • TUV 60950-1 508/1598/1433 60601-1 EO 3 60950-1 60950-1 60601 • CB Scheme Report/Cert Embedded Power for Business-Critical Continuity Electrical Specifications Output rating Set point Total regulation range Rated load Minimum load 390 Vdc 380 V to 400 Vdc 5 Vsb ± 1% 1000 W maximum Main output A Output noise PARD Output voltage overshoot Ordering Information Model Number PSE1000PFC Output 390 V Nominal Output Voltage Set Point 390 V Current Output Ripple P/P 0-50 deg C < 50 V Max Continuous Combined Line/ Load Power Regulation 1000 Mechanical Drawing Embedded Power for Business-Critical Continuity 3 of 4 Pin Assignment Signal Type L1 L2 S GND C. Mon TXD LD EN Relay C. Share RXD Remote INRUSH Output + Output - Description AC input AC input Signal ground Current monitoring Digital communication Load Enable Current Share Digital communication Remote ON/OFF Limit Inrush Current DC Output + DC Output - Embedded Power for Business-Critical Continuity Miscellaneous Specifications Burn-In 100% Burn-in at 45 °C, at 80 - 90% load. Duration of burn-in determined by Quality Assurance Procedures MTBF The power supply has a minimum MTBF of 300K hours using the Bell core 332, issue 6 specification 25 °C and 40 °C, ambient, at full load. With the power supply installed in a system in a 25 °C ambient environment and operating at full load, capacitor life shall be 10 years, minimum for ALL electrolytic capacitors contained within this power supply. The power supply shall demonstrate a MTBF level of > 500,000 hours. Quality Assurance Full QAV testing shall be conducted in accordance with Emerson Network Power Standards with reports available upon request. Warranty Emerson Network Power shall warrant the power supply to be free of defects in materials and workmanship for a minimum period of three years from the date of shipment, when operated within specifications. The warranty shall be fully transferable to the end owner of the equipment powered by the supply. 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone +1 760 930 4600 Facsimile +1 760 930 0698 4 of 4 Europe UK Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone +44 0 1384 842 211 Facsimile +44 0 1384 843 355 Asia HK 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone +852 2176 3333 Facsimile +852 2176 3888 For global contact, visit: techsupport.embeddedpower While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson and the Emerson Network Power logo are trademarks of Emerson Electric Co. 2013 Emerson Electric Co. All rights reserved.

PDF Datasheet Preview

Embedded Power for Business-Critical Continuity

PSE1000-PFC
1000 Watts

PFC Front End

Total Power 1000 W # of Outputs Single Output 390 V
1 of 4

Special Features
• 1000 W output power
• Unity power factor correction
• x 1”
• 119 Watts per cubic inch
• Industrial safety
• -40 °C to 85 °C
• High efficiency 94% typical
• Negative enable function
• Output OTP, OVP and power limit
• Current sharing and monitoring
• MIL-STD-810F for shock and vibration

Compliance
• EMI Class B with external filter
• EN61000 lunity
• RoHS 2

Electrical Specifications

Input

Input
90 - 264 Vac Operating 115/230 Vac Nominal

Frequency:
47 - 63 Hz

Inrush current:
50 A peak at 230 Vac 25 deg C with external resistor from INRUSH pin to OUTPUT -

Power factor:
> typical

Input current:

A RMS max input current, at 115 Vac

Hold up time:
16 ms minimum, at 115 Vrms AC input, full load with 680 uF/450 Vdc electrolytic capacitor

Efficiency:
> 94% typical at full load / 230 VAC nominal

ON/OFF power switch

Remote negative enable

Isolation:

PRI-Chassis 1500 Vac

Safety
• UL
• cUL
• TUV
60950-1 508/1598/1433 60601-1 EO 3 60950-1 60950-1 60601
• CB Scheme Report/Cert

Embedded Power for Business-Critical Continuity

Electrical Specifications

Output rating Set point Total regulation range

Rated load Minimum load
390 Vdc
380 V to 400 Vdc 5 Vsb ± 1% 1000 W maximum Main output A

Output noise PARD Output voltage overshoot
Ordering Information

Model Number

PSE1000PFC

Output 390 V

Nominal Output Voltage

Set Point
390 V

Current

Output Ripple P/P 0-50 deg C
< 50 V

Max Continuous Combined Line/ Load

Power

Regulation
1000

Mechanical Drawing

Embedded Power for Business-Critical Continuity
3 of 4

Pin Assignment Signal Type L1 L2 S GND C. Mon TXD LD EN Relay C. Share RXD Remote INRUSH Output + Output -

Description AC input AC input Signal ground Current monitoring Digital communication Load Enable

Current Share Digital communication Remote ON/OFF Limit Inrush Current DC Output + DC Output -

Embedded Power for Business-Critical Continuity

Miscellaneous Specifications

Burn-In 100% Burn-in at 45 °C, at 80 - 90% load. Duration of burn-in determined by Quality Assurance Procedures

MTBF The power supply has a minimum MTBF of 300K hours using the Bell core 332, issue 6 specification 25 °C and 40 °C, ambient, at full load. With the power supply installed in a system in a 25 °C ambient environment and operating at full load, capacitor life shall be 10 years, minimum for ALL electrolytic capacitors contained within this power supply. The power supply shall demonstrate a MTBF level of > 500,000 hours.

Quality Assurance Full QAV testing shall be conducted in accordance with Emerson Network Power Standards with reports available upon request.

Warranty Emerson Network Power shall warrant the power supply to be free of defects in materials and workmanship for a minimum period of three years from the date of shipment, when operated within specifications. The warranty shall be fully transferable to the end owner of the equipment powered by the supply.
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone +1 760 930 4600 Facsimile +1 760 930 0698
4 of 4

Europe UK

Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone +44 0 1384 842 211 Facsimile +44 0 1384 843 355

Asia HK
14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone +852 2176 3333 Facsimile +852 2176 3888

For global contact, visit:
techsupport.embeddedpower

While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

Emerson Network Power. The global leader in enabling business-critical continuity.

AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets

Services Surge Protection

EmersonNetworkPower.com

Emerson and the Emerson Network Power logo are trademarks of Emerson Electric Co. 2013 Emerson Electric Co. All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PSE1000PFC Datasheet file may be downloaded here without warranties.

Datasheet ID: PSE1000PFC 518483