NAL40 Series
Part | Datasheet |
---|---|
![]() |
NAL40-7617 (pdf) |
Related Parts | Information |
---|---|
![]() |
NAL40-7610 |
PDF Datasheet Preview |
---|
NAL40 Series Single, dual and triple output LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 40W AC/DC Universal Input Switch Mode Power Supplies • x inch package 1U applications • Ideal for high volume designs • Industry standard package • Overvoltage and short circuit protection • 40W with free air convection • EN55022, EN55011 conducted emissions level A The NAL40 series are 40W universal input AC/DC power supplies on a 5 x 3 inch card with a maximum component height of inch for use in 1U applications. These series are available with a wide range of models in the industry standard 5 x 3 inch footprint at low cost making the series ideal for new and existing high volume communication and industrial applications. The NAL40 meets level A conducted emissions. The NAL40 series provide 40W of output power with free air convection cooling with a peak output of 50W for a maximum duration of 60 seconds. The NAL40 series are designed for use in high volume low power data networking, computer and telecom applications such as hubs, routers, POS terminals, cable modems and PABX’s. This list is not exclusive as the generic feature set of both series with industry standard output configurations provide a solution for most high volume applications including many industrial applications. All specifications are typical at nominal input, full load at 25°C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Line regulation Main output Auxiliary outputs Total regulation Main output Auxiliary outputs Overshoot/undershoot At turn-on Transient response +5.1V 1.5A to 3A step Temperature coefficient Overvoltage protection +5.1V output Output power limit Primary power limited Short circuit protection Multiple output Single 12V, 15V, 24V and 48V <10% ±150mV max. dev., 500µs recovery ±0.02%/°C 6.25V ±0.75Vout 50W Pout, min. 110W Pin, max. 30 seconds Continuous automatic recovery INPUT SPECIFICATIONS Input voltage range Universal input Input frequency range Input surge current Safety ground leakage current 110VAC, cold start 230VAC, cold start 110VAC, 60Hz 230VAC, 50Hz 90 to 264VAC 120 to 370VDC 47Hz to 440Hz 15A 32A 0.2mA 0.4mA EMC CHARACTERISTICS Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity |
More datasheets: RJ11FODE | RJ11F6G | RJ11FC2N | JE14 | RJ11FC6N | RJ11FC2B | RJ11FC7B | RJ11F22N | FFAF20U120DNTU | NAL40-7610 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NAL40-7617 Datasheet file may be downloaded here without warranties.