LPS115

LPS115 Datasheet

LPS110 Series

Part	Datasheet
LPS115	LPS115 (pdf)

Related Parts	Information
LPS114	LPS114
LPS113	LPS113
LPS118	LPS118

PDF Datasheet Preview
110 Watts LPS110 Series Total Power 80-110 Watts Input Voltage 85-264 VAC 120-300 VDC # of Outputs Single Special Features • Universal input • High efficiency • Remote sense • Built-in EMI filter • Low output ripple • Adjustable output • Power afil • Overvoltage protection • Overload protection • Optional L bracket -B suffix • Cover kit available LPX110-C Environmental Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, L evel 3 Humidity Operating non-condensing 5% to 95% Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational Storage temperature -40° to 85°C Temperature coefficient per °C MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI filter Safety ground leakage current Output Maximum power Adjustment range Hold-up time Overload protection Overvoltage protection Logic Control Power failure Remote sense 85-264 VAC 120-300 VDC 47-440 Hz <18 A peak 115 VAC <36 A peak 230 VAC, cold start 25°C A max. RMS 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted mA 50/60 Hz, 264 VAC-input 80 W for convection 110 W with 30 CFM forced air ±5% minimum 20 ms W load, 115 VAC nominal line Short circuit protection. Case overload protected 110-145% above peak rating 5 V output VDC. O ther outputs 10% to 20% above nominal output. Latching type, recycle AC to reset. Safety VDE UL CSA NEMKO CB CE 0805/EN60950 IEC950 UL1950 CSA Level 3 EN 60950/EMKO-TUE 74-sec 203 Certificate and report Mark LVD 11774-3336-1245 LC #84997 E132002 LR53982C P95100376 1563, 1564, 1565, 1566, 1567 Technical Support 888 41-ASTEC or 407 241-2752 Americas 760 930-4600 E urope UK 44 1384 842-211 Asia HK 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 EUROPE Ordering Information Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30 CFM Forced Air Peak Load1 Regulation2 Ripple P/P PARD 3 LPS113 LPS114 LPS115 LPS118 ±2% ±2% ±2% ±2% Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in p arallel with a µF capacitor at rated line voltage and load. Note -B suffix added to model number indicates L bracket option. -B Bracket 120 mV 150 mV 240 mV 480 mV Pin Assignments ConnectorLPS113 LPS114 LPS115 LPS118 SK1-1 SK1-3 SK1-5 GND Neutral Line GND Neutral Line GND Neutral Line GND Neutral Line SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK2-7 SK2-8 SK2-9 SK201-1 SK201-2 SK202-1 SK202-2 +12 V +12 V +12 V Common +12 V +12 V +sense -sense Pok GND +15 V +15 V +15 V Common +15 V +15 V +sense -sense Pok GND +24 V +24 V +24 V Common +24 V +24 V +sense -sense Pok GND +48 V +48 V +48 V Common +48 V +48 V +sense -sense Pok GND Mating Connectors AC Input Molex 09-50-8051 USA 09-91-0500 UK PINS 08-58-0111 DC Outputs Molex 09-50-8091 USA 09-91-0900 UK PINS 08-58-0111 Remote sense/power fail: Molex 22-01-1022 USA 22-01-1023 UK PINS 08-50-0114 Astec Connector Kit #70-841-007, includes all of the above Notes Specifications subject to change without notice. All dimensions in inches mm , tolerance is Specifications are for convection rating at factory settings unless otherwise stated. Mounting holes M1 and M2 should be grounded f or EMI purposes. Mounting hole M1 is safety ground connection. L Bracket mounting 6-32 maximum insertion depth is Warranty 2 year Weight lb / kg #6-32 PEM 6 places VOLTAGE ADJ

PDF Datasheet Preview

110 Watts

LPS110 Series

Total Power 80-110 Watts Input Voltage 85-264 VAC
120-300 VDC # of Outputs Single

Special Features
• Universal input
• High efficiency
• Remote sense
• Built-in EMI filter
• Low output ripple
• Adjustable output
• Power afil
• Overvoltage protection
• Overload protection
• Optional L bracket -B suffix
• Cover kit available LPX110-C

Environmental

Operating temperature 0° to 50°C ambient derate each output at per degree from 50° to 70°C

Electromagnetic susceptibility Designed to meet IEC 801, -2, -3, -4, -5, -6, L evel 3

Humidity Operating non-condensing 5% to 95%

Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances G peak 5 Hz to 500 Hz, operational

Storage temperature -40° to 85°C

Temperature coefficient per °C

MTBF demonstrated >550,000 hours at full load and 25°C ambient conditions

Electrical Specs

Input

Input range Frequency Inrush current

Input current Efficiency EMI filter

Safety ground leakage current

Output

Maximum power Adjustment range Hold-up time Overload protection

Overvoltage protection

Logic Control

Power failure

Remote sense
85-264 VAC 120-300 VDC 47-440 Hz <18 A peak 115 VAC <36 A peak 230 VAC, cold start 25°C A max. RMS 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted
mA 50/60 Hz, 264 VAC-input
80 W for convection 110 W with 30 CFM forced air ±5% minimum 20 ms W load, 115 VAC nominal line Short circuit protection. Case overload protected 110-145% above peak rating 5 V output VDC. O ther outputs 10% to 20% above nominal output. Latching type, recycle AC to reset.

Safety

VDE UL CSA NEMKO

CB CE
0805/EN60950 IEC950 UL1950 CSA Level 3 EN 60950/EMKO-TUE 74-sec 203 Certificate and report Mark LVD
11774-3336-1245 LC #84997 E132002 LR53982C P95100376
1563, 1564, 1565, 1566, 1567

Technical Support 888 41-ASTEC or 407 241-2752

Americas 760 930-4600

E urope UK 44 1384 842-211

Asia HK 852-2437-9662

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE
Ordering Information

Model Number

Output Voltage

Minimum Load

Maximum Load with Convection Cooling

Maximum Load with 30 CFM Forced Air

Peak Load1

Regulation2

Ripple P/P PARD 3

LPS113

LPS114

LPS115

LPS118
±2%
±2%
±2%
±2%

Peak current lasting <30 seconds with a maximum 10% duty cycle. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF in p arallel with a µF capacitor at rated line voltage and load. Note -B suffix added to model number indicates L bracket option.
-B Bracket
120 mV 150 mV 240 mV 480 mV

Pin Assignments

ConnectorLPS113 LPS114 LPS115 LPS118

SK1-1 SK1-3 SK1-5

GND Neutral Line

GND Neutral Line

GND Neutral Line

GND Neutral Line

SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK2-7 SK2-8 SK2-9 SK201-1 SK201-2 SK202-1 SK202-2
+12 V +12 V +12 V Common +12 V +12 V +sense -sense Pok GND
+15 V +15 V +15 V Common +15 V +15 V +sense -sense Pok GND
+24 V +24 V +24 V Common +24 V +24 V +sense -sense Pok GND
+48 V +48 V +48 V Common +48 V +48 V +sense -sense Pok GND

Mating Connectors AC Input Molex 09-50-8051 USA
09-91-0500 UK PINS 08-58-0111

DC Outputs Molex 09-50-8091 USA 09-91-0900 UK PINS 08-58-0111

Remote sense/power fail:

Molex 22-01-1022 USA 22-01-1023 UK PINS 08-50-0114 Astec Connector Kit #70-841-007, includes all of the above

Notes Specifications subject to change without notice. All dimensions in inches mm , tolerance is Specifications are for convection rating at factory settings unless
otherwise stated. Mounting holes M1 and M2 should be grounded f or EMI purposes. Mounting hole M1 is safety ground connection. L Bracket mounting 6-32 maximum insertion depth is Warranty 2 year Weight lb / kg
#6-32 PEM 6 places

VOLTAGE ADJ

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LPS115 Datasheet file may be downloaded here without warranties.

Datasheet ID: LPS115 518454