Operating Instructions HPR12K-00
Part | Datasheet |
---|---|
![]() |
HPR12K-00-001 (pdf) |
Related Parts | Information |
---|---|
![]() |
HPR12K-00 |
PDF Datasheet Preview |
---|
Operating Instructions HPR12K-00 Embedded Power for Business-Critical Continuity General Install Connecting the input power cable, output load cable and communication wire according to the below figure. Aux. DC Output AC INPUT AC INPUT Main DC Output AC INPUT AC INPUT Main DC Output I2C/PMBus Communication AC Line Input General Settings Unless otherwise specified, when the PSON# switch is de-asserted 48V o/p is disabled . It is means Manual ON/OFF DIP switch SW1 should be default according to below table. And It must be checked before shipping. Power Supplies Status DIP switch SW1 setting as a default PSU 1# PSU 2# PSU 3# CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 PSU 4# CH 7 CH8 Down Down Down Down Note The status Down means set to ON position. The status UP means set to OFF position. Note Programming Switch SW1 default settings PSON switches OFF PSKILL switches ON Technical Reference Note Embedded Power for Business-Critical Continuity ON/OFF Operation PSON# Manual ON/OFF Operation The DIP switch SW1 used turn on or off the PSU by manually. The PSU in SLOT1 is turn on when the CH1 of DIP switch SW1 turn on. The other PSU see Table Note DIP switch CH2 should be set to ON as a default. Incase if CH2 is set to off, Power supply is slot 1 will not turn on even if CH1 is set to ON position. Table 1 PSON# Switch Characteristics Power Supplies Status PSU 1# PSU 2# PSU 3# PSU 4# Down |
More datasheets: 74AC573SCX | 74AC573SC | 74AC573SJ | 50738350935600F | 17207 | 2727 | T7024-PGQM 80 | T7024-PGPM 80 | T7024-TRQY | DEMOBOARD-T7024PGM |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HPR12K-00-001 Datasheet file may be downloaded here without warranties.