EXB100-48S3V3

EXB100-48S3V3 Datasheet

EXB100 Series Single output

Part	Datasheet
EXB100-48S3V3	EXB100-48S3V3 (pdf)

Related Parts	Information
EXB100-48S05	EXB100-48S05

PDF Datasheet Preview
EXB100 Series Single output DC/DC CONVERTERS 54-100W DC/DC Isolated Converters • Ultra wide trim range, 60% to 110% 1.08V to 5.5V • High efficiency, 5V, 3.3V, 1.8V • Basic insulation input to output • Industry standard half-brick pin-out • No minimum load • Over-voltage and over-temperature protection • Remote ON/OFF The EXB100 series of 100W single output isolated DC/DC converters are specially designed to meet the power needs of low voltage silicon. Housed in an open-frame package with standard footprint, these latest generation converters offer efficiencies as high as typical on 5V at 20A . The series comprises three 48V input models with 5V, 3.3V and 1.8V outputs. All models feature a wide input range, trimmable output voltage and 30A output 5V is limited to 20A . Remote sense and remote ON/OFF facilities are included as standard, and the converters are comprehensively protected against over-current, over-voltage and over-temperature conditions. 1 NEW Product All specifications are typical at nominal input, full load at 25°C unless otherwise stated TÜV 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability 60% to 110% Output setpoint accuracy Line regulation Low line to high line max. Load regulation Full load to min. load max. Total error band Minimum load Overshoot At turn-on and turn-off None Undershoot None Ripple and noise 5Hz to 20MHz See Note 1 100mV pk-pk 50mV rms Transient response See Note 2 Deviation 150mV 300µs recovery to within total error band INPUT SPECIFICATIONS Input voltage range 36 to 75VDC Input current No load Remote OFF 150mA 20mA Input current max. See Note 3 3.15A max. Io max. and Vin = 36 to 75V

PDF Datasheet Preview

EXB100 Series Single output

DC/DC CONVERTERS 54-100W DC/DC Isolated Converters
• Ultra wide trim range, 60% to 110% 1.08V to 5.5V
• High efficiency, 5V, 3.3V, 1.8V
• Basic insulation input to output
• Industry standard half-brick pin-out
• No minimum load
• Over-voltage and over-temperature protection
• Remote ON/OFF

The EXB100 series of 100W single output isolated DC/DC converters are specially designed to meet the power needs of low voltage silicon. Housed in an open-frame package with standard footprint, these latest generation converters offer efficiencies as high as typical on 5V at 20A . The series comprises three 48V input models with 5V, 3.3V and 1.8V outputs. All models feature a wide input range, trimmable output voltage and 30A output 5V is limited to 20A . Remote sense and remote ON/OFF facilities are included as standard, and the converters are comprehensively protected against over-current, over-voltage and over-temperature conditions.
1 NEW Product

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

TÜV
2 YEAR WARRANTY

SPECIFICATIONS

OUTPUT SPECIFICATIONS

Voltage adjustability
60% to 110%

Output setpoint accuracy

Line regulation

Low line to high line
max.

Load regulation

Full load to min. load
max.

Total error band

Minimum load

Overshoot

At turn-on and turn-off

None

Undershoot

None

Ripple and noise 5Hz to 20MHz

See Note 1
100mV pk-pk 50mV rms

Transient response See Note 2

Deviation
150mV 300µs recovery to within total error band

INPUT SPECIFICATIONS

Input voltage range
36 to 75VDC

Input current

No load Remote OFF
150mA 20mA

Input current max.

See Note 3
3.15A max. Io max. and Vin = 36 to 75V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EXB100-48S3V3 Datasheet file may be downloaded here without warranties.

Datasheet ID: EXB100-48S3V3 518444