DPS53

DPS53 Datasheet

DPS50 60 Watts

Part	Datasheet
DPS53	DPS53 (pdf)

PDF Datasheet Preview
POWER Data Sheet DPS50 60 Watts Total Power 30 - 60 Watts Input Voltage 90 - 264 Vac 127 - 300 Vdc # of Outputs Single Special Features CE Mark EMC & LVD except DPS52 Universal AC input Fully regulated output Overload and short circuit protection Internal remote sense to the output plug Constant voltage Level V efficiency except DPS52 High MTBF IEC320 AC receptacle, 3 pin type C14 Built in EMI filter CISPR 22 Class B LED power good indicator Input power < 74 watts Complies with EN61000-3-2 Meets Energy Star Safety UL CSA VDE CE CB PSE UL 60950-1 CSA-C22.2 no.60950-1 EN60950-1 EMC, LVD & ErP 2011 except DPS52 Certificate and report Denan 06-03051012 Electrical Specifications Input Input range 90 - 264 Vac wide range Frequency 127 - 300 Vdc Inrush current 47-440 Hz Input current < 60 A 230 Vac, cold start 25 °C Efficiency < A rms 115 Vac < 1 A 230 Vac EMI/RFI 80% full load typical, Vac Safety ground leakage current FCC Part 15, Subpart B Class B & EN55022 CISPR 22 Class B mA 50/60 Hz, 264 Vac input Output Maximum Power Po 60 W DPS52, 30 W Hold-up time 10ms. typical at full load 115 Vac Overvoltage protection 20% - 45% above nominal output maximum Latching type, recycle AC to reset. Overcurrent protection Output short circuit protection auto recover Overload protected 120 - 150% above maximum rating Cable/connector DC cable with mm center plug DC plug center +v DC plug outer -v Ordering Information Model Number Maximum Power DPS52* DPS53 DPS54 DPS55 DPS58 Output Voltage 5V 12 V 15 V 24 V 48 V Maximum Load 6A 5A 4A A Peak Load1 Regulation2 ± 2% ± 2% ± 2% ± 2% ± 2% Ripple P/P PARD 3 50 mV 120 mV 150 mV 240 mV 480 mV Peak current lasting < 15 seconds with a maximum 10% duty cycle. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 uF tantalum capacitor in parallel with a uF capacitor at rated line voltage and load ranges. * No CE approval under new EUP directive Mechanical Drawing AC INLET INDICATOR LED DC OUTPUT CABLE 2000±15 MODEL LABEL Notes Specifications subject to change without notice. All dimensions in inches mm , tolerance is ± ± mm Warranty 2 year Weight lb./.48 kg AC input power cord sold separately. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated Americas 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 WORLDWIDE OFFICES Europe UK Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 0 1384 842 211 Asia HK 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. 2014 Artesyn Embedded Technologies, Inc. For more information For support: DPS50-DS

PDF Datasheet Preview

POWER

Data Sheet

DPS50 60 Watts

Total Power 30 - 60 Watts Input Voltage 90 - 264 Vac
127 - 300 Vdc # of Outputs Single

Special Features

CE Mark EMC & LVD except DPS52 Universal AC input Fully regulated output Overload and short circuit protection Internal remote sense
to the output plug Constant voltage Level V efficiency except DPS52 High MTBF IEC320 AC receptacle, 3 pin type C14 Built in EMI filter CISPR 22 Class B LED power good indicator Input power < 74 watts Complies with EN61000-3-2 Meets Energy Star

Safety

UL CSA VDE CE

CB PSE

UL 60950-1 CSA-C22.2 no.60950-1

EN60950-1 EMC, LVD & ErP 2011
except DPS52 Certificate and report

Denan 06-03051012

Electrical Specifications

Input

Input range
90 - 264 Vac wide range

Frequency
127 - 300 Vdc

Inrush current
47-440 Hz

Input current
< 60 A 230 Vac, cold start 25 °C

Efficiency
< A rms 115 Vac < 1 A 230 Vac

EMI/RFI
80% full load typical, Vac

Safety ground leakage current FCC Part 15, Subpart B Class B & EN55022 CISPR 22 Class B mA 50/60 Hz, 264 Vac input

Output

Maximum Power Po
60 W DPS52, 30 W

Hold-up time
10ms. typical at full load 115 Vac

Overvoltage protection
20% - 45% above nominal output maximum Latching type, recycle AC to reset.

Overcurrent protection

Output short circuit protection auto recover Overload protected 120 - 150% above maximum rating

Cable/connector

DC cable with mm center plug DC plug center +v DC plug outer -v
Ordering Information

Model Number

Maximum Power

DPS52*

DPS53

DPS54

DPS55

DPS58

Output Voltage
5V 12 V 15 V 24 V 48 V

Maximum Load 6A 5A 4A A

Peak Load1

Regulation2
± 2% ± 2% ± 2% ± 2% ± 2%

Ripple P/P PARD 3
50 mV 120 mV 150 mV 240 mV 480 mV

Peak current lasting < 15 seconds with a maximum 10% duty cycle. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 uF tantalum capacitor in parallel with a uF capacitor at rated line voltage and load ranges. * No CE approval under new EUP directive

Mechanical Drawing

AC INLET

INDICATOR LED DC OUTPUT CABLE
2000±15

MODEL LABEL

Notes Specifications subject to change without notice. All dimensions in inches mm , tolerance is ± ± mm Warranty 2 year Weight lb./.48 kg AC input power cord sold separately. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated

Americas
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832

WORLDWIDE OFFICES

Europe UK

Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 0 1384 842 211

Asia HK
14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333

While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. 2014 Artesyn Embedded Technologies, Inc.

For more information For support:

DPS50-DS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DPS53 Datasheet file may be downloaded here without warranties.

Datasheet ID: DPS53 518439