ALH60K48N

ALH60K48N Datasheet


ALH60 Open Frame

Part Datasheet
ALH60K48N ALH60K48N ALH60K48N (pdf)
Related Parts Information
AEH60G48 AEH60G48 AEH60G48
ALH60Y48 ALH60Y48 ALH60Y48
ALH60K48 ALH60K48 ALH60K48
ALH60F48 ALH60F48 ALH60F48
ALH60G48 ALH60G48 ALH60G48
AEH60K48 AEH60K48 AEH60K48
AEH60F48 AEH60F48 AEH60F48
AEH60Y48 AEH60Y48 AEH60Y48
ALH60G48N ALH60G48N ALH60G48N
AEH60K48N AEH60K48N AEH60K48N
AEH60Y48N AEH60Y48N AEH60Y48N
AEH60G48N AEH60G48N AEH60G48N
ALH60Y48N ALH60Y48N ALH60Y48N
AEH60F48N AEH60F48N AEH60F48N
ALH60F48N ALH60F48N ALH60F48N
PDF Datasheet Preview
60Amps

AEH60

Total Power Input Voltages No. of Outputs:
200 Watts 3.3V 60A 48 V Single

ALH60 Open Frame

Ultra High Efficiency Half Brick

Electrical Specs

Input

Input range Input Surge Efficiency
36-75 VDC 100V / 100ms 91% 3.3V Typical

Control

Enable

TTL compatible positive or negative enable logic control options

Special Features
• High efficiency, 91% Typical
• Baseplate AEH or Open frame ALH design
• Low output ripple and noise
• High capacitive load limit on start-up
• Remote sense compensation
• Regulation to zero load
• Fixed frequency switching
• Industry Std features Input UVLO, OCP, OVP,

OTP Short ckt protection ±10% Output Adjust
• Positive or Negative enable logic control option
• Meets Basic Insulation

Output

Regulation Line, Load, Temp Ripple and Noise1 Remote Sense Output Voltage Adjust Range Transient Response

Overv Voltage Protection Over Current Protection Over Temperature Protection Isolation Voltage
<2% 2% typical 100mVp-p max Up to 10%Vout
±10% of nominal output 60mV typical output deviation 25% step change 150 µS recovery time
135% nominal output latching
115% of full load latching

Shutdown - autorecovery mode 1500 Vdc

Environmental

Operating temperature -40°C to +100°C Baseplate AEH60 -40°C to +85°C Ambient ALH60

Storage temperature -55°C to +125°C

Overtemperature protection 115°C PCB Temperature Typical

MTBF >1 million hours

Safety

UL, cUL 60950 Recognized TUV EN60950 Licensed
2 North America USA 1-888-41-ASTEC Europe UK 44 1384 842-211Asia HK 852-2437-9662

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley

West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355

ASIA

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road

Fwai Fong, New Territories Hong Kong

Telephone 852-2437-9662 Facsimile 852-2402-4426
Ordering Information

Input Voltage

Output Voltage
3.3V 60A 2.5V 60A 2.5V 60A 1.8V 60A 1.2V 60A

Efficiency
91% Typ 90% Typ 90% Typ 89% Typ 85% Typ

Model Number

AEH60F48 N AEH60G48 N AEH60G48N-6T AEH60Y48 N AEH60K48 N
see note 3

OPTION:
3.3V 60A 2.5V 60A 1.8V 60A 1.2V 60A
91% Typ 90% Typ 89% Typ 85% Typ

ALH60F48 N ALH60G48 N ALH60Y48 N ALH60K48 N
suffix “N” = Negative Enable default is Positive Enable without suffix “N” Standard pin length is 5mm nominal. Consult factory for other options.

Pin Assignments

Single Output
+Vin Enable On/Off Case AEH version -Vin - Output - Sense Trim + Sense + Output

Notes 20 mHz bandwidth. External 10 uF tant. capacitor +
uF cer. capacitor placed from +V out to -Vout. Requires a mf, 100V film capacitor connected
between +V in and -V in to meet FCC class A and ETS300-386-1 requirements for conducted noise. Consult Factory for filtering information to meet FCC class B, VDE or EIC specifications. Suffix -”6” for 3.7mm nominal pin length, “T” for tuned version for specific transient response requirement. Minimum output capacitance required. Refer to Technical refernce Notes for details. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. All specifications subject to change without notice. Mechanical drawings are for reference only Technical Reference Notes should be consulted for detailed information when available Warranty 1yr

AEH - BASEPLATE

M3 X0.5 MOUNTING HOLE 4 PLACES
+ Vin
+ Output
2 PLACES
7 PLACES
- Vin
-Output

PIN SIDE DOWN

SIDE VIEW

PIN ASSIGNMENT
1 + Vin 2 Enable On/Off 3 CASE 4 - Vin
5 -Output 6 -Sense 7 Trim 8 + Sense 9 + Output

PIN SIDE UP

NOTES ALL DIMENSIONS ARE IN INCHES MILLIMETERS PIN PLACEMENT TOLERANCE ± MECHANICAL TOLERANCE ±
+ Vin 1
- Vin 4
9 + Output 8
6 5 -Output
7 PLACES 2 PLACES

PIN SIDE DOWN
More datasheets: M1462 WH001 | AEH60G48 | ALH60Y48 | ALH60K48 | ALH60F48 | ALH60G48 | AEH60K48 | AEH60F48 | AEH60Y48 | ALH60G48N


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ALH60K48N Datasheet file may be downloaded here without warranties.

Datasheet ID: ALH60K48N 518392