AD5012N3L

AD5012N3L Datasheet

AD50 Series

Part	Datasheet
AD5012N3L	AD5012N3L (pdf)

Related Parts	Information
AD5012N2L	AD5012N2L

PDF Datasheet Preview
Embedded Power for Business-Critical Continuity AD50 Series 50 Watts Total Power Input Voltage # of Outputs: 50 Watts 90 - 264 Vac Single Special Features • Universal AC input • Fully regulated output • EN61000-3-2 compliant • Input power < 74 watts • Overcurrent and overvoltage protection • High MTBF • IEC320 AC input receptacle 3 pin type C6 - AD5012N3L 2 pin type C8 - AD5012N2L • Built in EMI filter • CISPR 22 Class B • AC input fuse • Complies with One Watt Input Energy Star Requirement Safety CSAUL UL 60950-1 CSA-C22.2 no.60950-1 Electrical Specifications Input Input 90 - 264 Vac wide range Frequency Inrush current Input current Efficiency: 47 - 63 Hz 60 A maximum 230 Vac, cold start 2 A maximum 80% typical EMI/RFI Safety ground leakage current: FCC Part 15, Class B & EN55022 CISPR 22 Class B 300 µA 50/60 Hz, 264 Vac input - AD5012N3L 100 µA 50/60 Hz, 264 Vac input - AD5012N2L Output Maximum Power Po Hold-up time Overvoltage protection: Overcurrent protection: Cable/connector : 17 ms. minimum at full load 100 Vac, 47 Hz 16 - 20 V Latching type, recycle AC to reset. Output short circuit protection auto recover Overload protection 110 - 120% above maximum rating DC cable with mm x mm barrel plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature 5° to +40 °C ambient Storage temperature Electromagnetic susceptibility: Humidity: -40 °C to +70 °C Designed to meet EN61000-4-2, -4, -5, level 4 EN61000-4-3, -6, 10v/m EN61000-4-8, -11 EN61000-3-3 and EN61000-3-2 Class A Operating non-condensing 10% to 90% RH MTBF demonstrated > 300,000 hours at full load and 25 °C ambient conditions Embedded Power for Business-Critical Continuity Ordering Information Model Maximum Number Power Output Voltage Maximum Load Peak Load1 Regulation2 Ripple P/P PARD 3 AD5012N3L ± 5% < 500 mV AD5012N2L ± 5% < 500 mV Peak current lasting 200 ms every 3 seconds. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF tantalum capacitor in parallel with a µF capacitor at rated line voltage and load ranges. Mechanical Drawing 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone +1 760 930 4600 Facsimile +1 760 930 0698 Europe UK Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone +44 0 1384 842 211 Facsimile +44 0 1384 843 355 1219 ±20 Asia HK 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone +852 2176 3333 Facsimile +852 2176 3888 For global contact, visit: techsupport.embeddedpower 1219 ±20 While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. Specifications subject to change without notice. All dimensions in inches mm , tolerance is ± ± mm Warranty 2 year Weight lb./ kg AC input power cord sold separately Specifications at factory settings at 115 Vac input, 25 °C unless otherwise stated AC Input Connector IEC320, C6 or C8, mate with C5 and C7 respectively. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2011 Emerson Electric Co.

PDF Datasheet Preview

Embedded Power for Business-Critical Continuity

AD50 Series
50 Watts

Total Power Input Voltage # of Outputs:
50 Watts 90 - 264 Vac Single

Special Features
• Universal AC input
• Fully regulated output
• EN61000-3-2 compliant
• Input power < 74 watts
• Overcurrent and overvoltage
protection
• High MTBF
• IEC320 AC input receptacle
3 pin type C6 - AD5012N3L 2 pin type C8 - AD5012N2L
• Built in EMI filter
• CISPR 22 Class B
• AC input fuse
• Complies with One Watt Input Energy Star Requirement

Safety

CSAUL UL 60950-1 CSA-C22.2 no.60950-1

Electrical Specifications

Input

Input
90 - 264 Vac wide range

Frequency Inrush current Input current Efficiency:
47 - 63 Hz 60 A maximum 230 Vac, cold start 2 A maximum 80% typical

EMI/RFI Safety ground leakage current:

FCC Part 15, Class B & EN55022 CISPR 22 Class B 300 µA 50/60 Hz, 264 Vac input - AD5012N3L 100 µA 50/60 Hz, 264 Vac input - AD5012N2L

Output

Maximum Power Po Hold-up time Overvoltage protection:

Overcurrent protection:

Cable/connector :
17 ms. minimum at full load 100 Vac, 47 Hz
16 - 20 V Latching type, recycle AC to reset.

Output short circuit protection auto recover Overload protection 110 - 120% above maximum rating

DC cable with mm x mm barrel plug DC plug center +v DC plug outer -v

Environmental Specifications

Operating temperature 5° to +40 °C ambient

Storage temperature Electromagnetic susceptibility:

Humidity:
-40 °C to +70 °C Designed to meet EN61000-4-2, -4, -5, level 4 EN61000-4-3, -6, 10v/m EN61000-4-8, -11 EN61000-3-3 and EN61000-3-2 Class A

Operating non-condensing 10% to 90% RH

MTBF demonstrated > 300,000 hours at full load and 25 °C ambient conditions

Embedded Power for Business-Critical Continuity
Ordering Information

Model

Maximum

Number

Power

Output Voltage

Maximum Load

Peak Load1 Regulation2

Ripple P/P PARD 3

AD5012N3L
± 5%
< 500 mV

AD5012N2L
± 5%
< 500 mV

Peak current lasting 200 ms every 3 seconds. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory
settings. Peak-to-peak with 20 MHz bandwidth and 10 µF tantalum capacitor in parallel with a µF capacitor at rated
line voltage and load ranges.

Mechanical Drawing
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone +1 760 930 4600 Facsimile +1 760 930 0698

Europe UK

Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone +44 0 1384 842 211 Facsimile +44 0 1384 843 355
1219 ±20

Asia HK
14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone +852 2176 3333 Facsimile +852 2176 3888

For global contact, visit:
techsupport.embeddedpower 1219 ±20

While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

Emerson Network Power. The global leader in enabling business-critical continuity.

Specifications subject to change without notice.

All dimensions in inches mm , tolerance is ± ± mm

Warranty 2 year Weight lb./ kg AC input power cord sold separately Specifications at factory settings at 115 Vac input,
25 °C unless otherwise stated AC Input Connector IEC320, C6 or C8, mate with C5 and C7
respectively.

AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets

Services Surge Protection

EmersonNetworkPower.com

Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2011 Emerson Electric Co.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AD5012N3L Datasheet file may be downloaded here without warranties.

Datasheet ID: AD5012N3L 518390