SMT12F-05W3V3J

SMT12F-05W3V3J Datasheet

SMT12F Series

Part	Datasheet
SMT12F-05W3V3J	SMT12F-05W3V3J (pdf)

Related Parts	Information
SMT12F-05W3V3	SMT12F-05W3V3

PDF Datasheet Preview
SMT12F Series Vin and 5 Vin single output Total Power 31.2W Input Voltage Vdc # of Outputs Single Embedded Power for Business-Critical Continuity Special Features • Designed to meet ultra fast transient requirements up to 300 A/us step load transients • 12 A current rating • Input voltage range: Vdc to Vdc • Output voltage range: Vdc to Vdc • Extremely low internal power dissipation • Minimal thermal design concerns • Ideal solution where board space is at a premium or tighter card pitch is required • Available RoHS compliant • 2 year warranty Safety UL/cUL CAN/CSA No. E174104 UL 60950 File No. E174104 TÜV Product Service EN60950 Certificate No. B 04 38572 041 CB Report and Certificate to IEC60950 DE3-52484 The SMT12F series is a new range of ultra-compact non-isolated point-of-load converters for space-critical applications. The new SMT12F Typhoon family surface-mount converter has a footprint of just x 16 mm - and unlike competitive products on the market, requires only the addition of a small number of ceramic output capacitors to realise a complete high-performance point-of-load POL solution. The SMT12F is primarily intended for use on very densely packed, high functionality boards and for powering advanced silicon including network and communication processors, DSPs, FPGAs and ASICs. A key advantage of the SMT12F is that it only needs the addition of five 22 uF ceramic output capacitors to provide a complete full-specification, high efficiency POL solution with transient response capabilities that extend up to 300 A/us. The total board space required for the module and capacitors is a mere 300 mm2, facilitating easy co-location with the load. Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT SPECIFICATIONS Voltage adjustability Wide trim See Note 6 Vin Setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot/undershoot Ripple and noise See Note 5 5 Hz to 20 MHz Temperature co-efficient Transient response Vout = V di/dt 300 A/us Remote sense typ. typ. typ. typ. None 40 mV pk-pk 25 mV rms

PDF Datasheet Preview

SMT12F Series

Vin and 5 Vin single output

Total Power 31.2W Input Voltage Vdc # of Outputs Single

Embedded Power for Business-Critical Continuity

Special Features
• Designed to meet ultra fast transient requirements up to 300 A/us step load transients
• 12 A current rating
• Input voltage range:

Vdc to Vdc
• Output voltage range:

Vdc to Vdc
• Extremely low internal
power dissipation
• Minimal thermal
design concerns
• Ideal solution where board
space is at a premium or tighter card pitch is required
• Available RoHS compliant
• 2 year warranty

Safety

UL/cUL CAN/CSA No. E174104 UL 60950 File No. E174104

TÜV Product Service EN60950 Certificate No. B 04 38572 041

CB Report and Certificate to IEC60950 DE3-52484

The SMT12F series is a new range of ultra-compact non-isolated point-of-load converters for space-critical applications. The new SMT12F Typhoon family surface-mount converter has a footprint of just x 16 mm - and unlike competitive products on the market, requires only the addition of a small number of ceramic output capacitors to realise a complete high-performance point-of-load POL solution. The SMT12F is primarily intended for use on very densely packed, high functionality boards and for powering advanced silicon including network and communication processors, DSPs, FPGAs and ASICs. A key advantage of the SMT12F is that it only needs the addition of five 22 uF ceramic output capacitors to provide a complete full-specification, high efficiency POL solution with transient response capabilities that extend up to 300 A/us. The total board space required for the module and capacitors is a mere 300 mm2, facilitating easy co-location with the load.

Embedded Power for Business-Critical Continuity

Specifications

All specifications are typical at nominal input, full load at 25°C unless otherwise stated.

OUTPUT SPECIFICATIONS

Voltage adjustability

Wide trim See Note 6 Vin

Setpoint accuracy

Line regulation

Load regulation

Total error band

Minimum load

Overshoot/undershoot

Ripple and noise See Note 5
5 Hz to 20 MHz

Temperature co-efficient

Transient response Vout = V
di/dt 300 A/us

Remote sense
typ.
typ.
typ.
typ.

None
40 mV pk-pk 25 mV rms

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SMT12F-05W3V3J Datasheet file may be downloaded here without warranties.

Datasheet ID: SMT12F-05W3V3J 511121