APC08M03-J

APC08M03-J Datasheet


APC08 8 Amp

Part Datasheet
APC08M03-J APC08M03-J APC08M03-J (pdf)
Related Parts Information
APC08J03-J APC08J03-J APC08J03-J
APC08Y08-J APC08Y08-J APC08Y08-J
APC08J08-J APC08J08-J APC08J08-J
APC08F03-J APC08F03-J APC08F03-J
APC08G03-J APC08G03-J APC08G03-J
APC08K03-J APC08K03-J APC08K03-J
APC08K08-J APC08K08-J APC08K08-J
APC08Y03-J APC08Y03-J APC08Y03-J
APC08F08-J APC08F08-J APC08F08-J
APC08M08-J APC08M08-J APC08M08-J
APC08G08-J APC08G08-J APC08G08-J
PDF Datasheet Preview
Astec Industry Standard
30 Watts

Total Power Input Voltages No. of Outputs:
30W 1.8V - 13V Single

APC08 8 Amp

Special Features
• Point of load POL applications
• High efficiency,
• -40°C to +85°C Ambient operating
temperature
• Open Frame SMT
• Positive enable function
• Low output ripple and noise
• Regulation to zero load
• Adjustable Output through external resistor
programming
• Fixed frequency switching 400 kHz
• EU Directive 2002/95/EC compliant for RoHS

Environmental

Operating temperature -40°C to +85°C Storage temperature -55°C to +125°C Demonstrated MTBF > Million Hours

Electrical Specs

Input

Input range Input Surge

Efficiency

Control

Enable

Output

Regulation Line, Load, Temp

Ripple and noise

Output voltage adjust range

Transient Response
1.8-6.0VDC and 6.5-13.0VDC 08 Device 14V 03 Device 7V

TTL compatible positive enable option
100mV 5V and 6V 75mV 2.5V and 3.3V 50mV below 2.5V
08 Device 0.9V to 6.2V 03 Device 0.9V to 3.6V 5% max deviation with 50% to 75% full load 500 uS max recovery

Specifications subject to change without notice.

Safety

UL, cUL 60950 Recognized TUV EN60950 Licensed
1 North America USA 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662

APC08

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley

West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355

ASIA

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road

Kwai Fong, New Territories Hong Kong

Telephone 852-2437-9662 Facsimile 852-2402-4426
Ordering Information

Input Voltage
1.8V-6.0V 1.8V-6.0V 1.8V-6.0V 2.2V-6.0V 3.0V-6.0V 4.0V-6.0V
6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V 6.5V-13.0V

Output Voltage
0.9V 8A 1.2V 8A 1.5V 8A 1.8V 8A 2.5V 8A 3.3V 8A
0.9V 8A 1.2V 8A 1.5V 8A 1.8V 8A 2.5V 8A 3.3V 8A

Efficiency Full Load
76% Typ * 81% Typ 86% Typ 88% Typ 91% Typ 93% Typ
75% Typ 81% Typ 84% Typ 86% Typ 90% Typ 92% Typ

Model Number

APC08J03 APC08K03 APC08M03 APC08Y03 APC08G03 APC08F03

APC08J08 APC08K08 APC08M08 APC08Y08 APC08G08 APC08F08
* Typical Efficiency is measured at full load, mid range input and at TA=25°C Options suffix “-9” = Output Trim option suffix “-9MA” = Output Trim with Ishare and PGood options suffix “-J” = Jedec Style Tray Packaging Default packaging is T&R with no “-J” suffix required suffix “L” = RoHS compliant RoHS 6 / Blank = RoHS compliant with Lead pb in solder exemption RoHS5

Mechanical Dimensions

Tolerances x.xx +/- in x.x +/- 0.5mm x.xxx +/- in x.xx +/- 0.25mm

Astec Industry Standard

Pin Side Down [dimensions in mm]

Optional Pins PGood - Power Good Logic Signal P - Active Current Share Pin Trim - Trim Pin

Note Specifications given are typical values at nominal
conditions. The Technical Reference Notes should be
consulted for detailed information. Specifications subject to change without notice.

Mechanical drawings are for reference only
More datasheets: VG-4531CB 61.4400M-GGCT3 | HSHM-S110B5-5AP1-TG30 | HSHM-S110B3-5AP1-TG30 | APC08J03-J | APC08Y08-J | APC08J08-J | APC08F03-J | APC08G03-J | APC08K03-J | APC08K08-J


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived APC08M03-J Datasheet file may be downloaded here without warranties.

Datasheet ID: APC08M03-J 511078