C9120-00

C9120-00 Datasheet


Series C81/C91 Standard Dual Beam Wire Wrap Edge-Grip Socket

Part Datasheet
C9120-00 C9120-00 C9120-00 (pdf)
Related Parts Information
C9108-00 C9108-00 C9108-00
C8114-04 C8114-04 C8114-04
C8118-04 C8118-04 C8118-04
C8116-04 C8116-04 C8116-04
C8120-04 C8120-04 C8120-04
C8122-04 C8122-04 C8122-04
C8124-04 C8124-04 C8124-04
C9118-00 C9118-00 C9118-00
C8140-04 C8140-04 C8140-04
C9140-00 C9140-00 C9140-00
C9114-00 C9114-00 C9114-00
C9116-00 C9116-00 C9116-00
C9122-00 C9122-00 C9122-00
C9124-00 C9124-00 C9124-00
C9128-00 C9128-00 C9128-00
C8128-04 C8128-04 C8128-04
C8108-04 C8108-04 C8108-04
PDF Datasheet Preview
Series C81/C91 Standard Dual Beam Wire Wrap Edge-Grip Socket
• Dual beam, edge-grip contacts provide high retention with positive wiping action
• Removable cover provides lower profile
• Side-to-side stackable

GENERAL SPECIFICATIONS
• BODY black UL 94V-0 glass-filled 4/6 Nylon
• DUAL BEAM CONTACT Grade A Phosphor Bronze, 1/2-hard
• CONTACT PLATING all over 50u Ni per SAE-AMS-QQ-N-290 Sn
200u min. matte Sn per ASTM B545-97 Sn/Pb 50-150u
min. 90/10 Sn/Pb per MIL-P-81728 Au 10u min. per MIL-G-45204
• CONTACT CURRENT RATING amp
• CONTACT RESISTANCE 20 mΩ initial
• INSULATION RESISTANCE 100 mΩ 500 VDC per MIL-STD-1344, method

CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be
• DIELECTRIC WITHSTANDING VOLTAGE 1000 VAC
furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice.
• OPERATING TEMPERATURE Sn -67°F to 221°F [-55°C to
105°C] Au -67°F to 257°F [-55°C to 125°C]
• SOLDERABILITY MIL-STD-202, Method 208, less heat aging
• WITHOUT COVER accepts leads up to x
ORDERING INFORMATION C XX-XX TL
x or dia.

Socket Series

Optional Plating Sn/Pb
• WITH COVER accepts leads long Pin Plating

C81 Series

MOUNTING CONSIDERATIONS
91 = Au 81 = Sn
04 = Closed Entry 54 = Open Entry w/o Cover
• SUGGESTED PCB HOLE SIZE dia. No. of Pins see Table

C91 Series
00 = Closed Entry
50 = Open Entry w/o Cover

ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED

No. of Pins 8 14 16 18 20 22 24 28 36 40

Dim “A”

Dim. “B”

Dim. “C”

Dim. “D”

Dim. “E” N/A

Bristol, PA 19007-6810 USA TEL 215 781-9956
• FAX 215 781-9845


PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
More datasheets: C8118-04 | C8116-04 | C8120-04 | C8122-04 | C8124-04 | C9118-00 | C8140-04 | C9140-00 | C9114-00 | C9116-00


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C9120-00 Datasheet file may be downloaded here without warranties.

Datasheet ID: C9120-00 518381