24-516-10

24-516-10 Datasheet


• A choice of 24-, 28-, or 40-pin count devices can be inserted without bending or otherwise damaging the legs, since no force is required to either insert or remove the component from the socket.

Part Datasheet
24-516-10 24-516-10 24-516-10 (pdf)
Related Parts Information
40-516-11S 40-516-11S 40-516-11S
28-516-11 28-516-11 28-516-11
40-516-10 40-516-10 40-516-10
28-516-10 28-516-10 28-516-10
28-516-11S 28-516-11S 28-516-11S
24-516-11 24-516-11 24-516-11
24-516-11S 24-516-11S 24-516-11S
24-516-11M 24-516-11M 24-516-11M
40-516-11 40-516-11 40-516-11
PDF Datasheet Preview
Series 516 Zero-Insertion-Force Socket
• A choice of 24-, 28-, or 40-pin count devices can be inserted without bending or otherwise damaging the legs, since no force is required to either insert or remove the component from the socket.
• Contacts are normally open and are closed by a unique cam action controlled by dual lever arms.
• The last 15° of movement of the cam provides a wiping action to the contacts on the legs of the device to remove any residue, ensuring a gas-tight seal.
• Tapered entry helps guide the device legs into the mating position with the contacts.

SPECIFICATIONS
• Body, Handle, and Cam Black UL 94V-0 Glass-filled 4/6 Nylon
• Pins are Be-Cu 170 or 172, 1/2-hard

NOTE Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can
• Pin Plating -11 = 10u" [0.25um] min. Gold per MIL-G-45204 over 50u" [1.27um] be furnished, depending on quantities. Aries reserves the
min. Nickel per SAE-AMS-QQ-N-290
right to change product specifications without notice.
• Contact Current Rating = 1 Amp
ORDERING INFORMATION
• Operating Temperature 257°F [125°C]
• Minimum Retention Force when closed = 15 grams/lead, based on a thick test lead
• Accepts most lead widths with lengths from to

X-516-11X

Pins
24, 28, 40 Series

Optional Suffix S = Short Lever Arm M = Midget Lever Arm

MOUNTING CONSIDERATIONS
• Suggested PCB Hole Size = diameter

Plating 11 = Gold over Nickel

ALL DIMENSIONS INCHES [MILLIMETERS]

Series 526 ZIF Socket also available Consult Data Sheet 10018

No. of Pins 24 28 40

Dim. “C”

Standard Lever Arm

Dim. “D”

Dim. “E”

Short Lever Arm

Dim. “D”

Dim. “E”

Midget Lever Arm

Dim. “D”

Dim. “E”

Bristol, PA 19007-6810 USA TEL 215 781-9956
• FAX 215 781-9845


PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
More datasheets: UP2T-220-R | UP2T-1R0-R | UP2T-150-R | UP2T-101-R | UP2T-100-R | UP2T-1R5-R | UP2T-4R7-R | 40-516-11S | 28-516-11 | 40-516-10


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 24-516-10 Datasheet file may be downloaded here without warranties.

Datasheet ID: 24-516-10 518373