84-505-110

84-505-110 Datasheet

84-PGM13042-30

Part	Datasheet
84-505-110	84-505-110 (pdf)

Related Parts	Information
52-505-110	52-505-110

PDF Datasheet Preview
Series 505 PLCC-to-PGA JEDEC Type Pitch Adapter • Convert surface mount PLCC packages to a PGA footprint • Pin polarization option also available • Consult factory for Panelized Form or for mounting of consigned chips GENERAL SPECIFICATIONS • ADAPTER BODY FR-4, thick, with 1-oz. min. Cu traces • PADS hot-air solder leveled • PINS Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 • PIN PLATING 200µ Sn/Pb 93/7 ASTM B579-73 over 100µ Ni per ASE AMS-QQ-N-290 or 10u Au • OPERATING TEMPERATURE 221°F [105°C] MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE dia • STANDARD will plug into PGA socket CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS ORDERING INFORMATION XX-505-11 X-P No. of Pins 28, 44, 68, 84 or 29, 45, 69, 85 with Polarization Pin Series Stand-offs w/Solder Pin Tail Optional Panelized Version Pin Plating 0 = Sn standard 1 = Au # Pins 28 or 29 44 or 45 68 or 69 84 or 85 Dim. “A” Dim. “B” Dim. “C” Dim. “D” Matching PGA P/N 29-PGM06002-30 44-PGM08002-30 68-PGM11032-30 84-PGM13042-30 Bristol, PA 19007-6810 USA TEL 215 781-9956 • FAX 215 781-9845 • PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

PDF Datasheet Preview

Series 505 PLCC-to-PGA JEDEC Type Pitch Adapter
• Convert surface mount PLCC packages to a PGA footprint
• Pin polarization option also available
• Consult factory for Panelized Form or for mounting of consigned chips

GENERAL SPECIFICATIONS
• ADAPTER BODY FR-4, thick, with 1-oz. min. Cu traces
• PADS hot-air solder leveled
• PINS Brass 360 1/2-hard per UNS C36000 ASTM-B16-00
• PIN PLATING 200µ Sn/Pb 93/7 ASTM B579-73 over 100µ Ni
per ASE AMS-QQ-N-290 or 10u Au
• OPERATING TEMPERATURE 221°F [105°C]

MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE dia
• STANDARD will plug into PGA socket

CUSTOMIZATION In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE Aries reserves the right to change product general specifications without notice.

ALL DIMENSIONS INCHES [MILLIMETERS] ALL TOLERANCES UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
ORDERING INFORMATION XX-505-11 X-P

No. of Pins 28, 44, 68, 84 or 29, 45, 69, 85 with Polarization Pin

Series Stand-offs w/Solder Pin Tail

Optional Panelized Version Pin Plating
0 = Sn standard 1 = Au
# Pins 28 or 29 44 or 45 68 or 69 84 or 85

Dim. “A”

Dim. “B”

Dim. “C”

Dim. “D” Matching PGA P/N
29-PGM06002-30
44-PGM08002-30
68-PGM11032-30
84-PGM13042-30

Bristol, PA 19007-6810 USA TEL 215 781-9956
• FAX 215 781-9845
•

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 84-505-110 Datasheet file may be downloaded here without warranties.

Datasheet ID: 84-505-110 518371