18-351000-11-RC

18-351000-11-RC Datasheet

Part	Datasheet
18-351000-11-RC	18-351000-11-RC (pdf)

Related Parts	Information
28-351000-11-RC	28-351000-11-RC
20-351000-11-RC	20-351000-11-RC
14-351000-11-RC	14-351000-11-RC
16-351000-11-RC	16-351000-11-RC

PDF Datasheet Preview
Series 351000 SSOP IC to DIP Adapter RoHS/ WEEE Compliant FEATURES: • RoHS/ WEEE Compliant • Allows the use of .65mm pitch surface mount ICs in thru-hole designs. • Ideal for prototyping and testing/evaluating SSOP ICs. • Adapter can be cut to smaller sizes by end user • Consult factory for panelized form or for mounting of consigned ICs. SPECIFICATIONS: • Adapter body is thick FR406 or IS410 per IPC4101A/26 with 1 ounce minimum Copper traces both sides. • Pad are finished with ENIG Immersion Gold over Electroless Nickel • Pins are Brass Alloy 360 1/2 hard per UNS C36000 ASTM-B16-00. • Pin plating is 10 u Min. Gold per MIL-G-45204 over 100 u Min. Nickel per SAE-AMS-QQ-N-290. Note Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. • Current rating=1 Amp. • Operating temperature=221°F [105°C]. ORDERING INFORMATION MOUNTING CONSIDERATIONS • Suggested PCB hole size=.028 ± ± dia. XX-351000-11-RC • Will plug into standard IC sockets. ALL DIMENSIONS INCHES [MILLIMETERS] No. of pins 14, 16, 18, 20, 24, 28 Series Gold plated solder tail pin “A”=NO. OF PINS PER ROW X “B”= NO. OF PINS PER ROW - 1 X “C”= NO. OF PADS PER ROW - 1 X All tolerances ± unless otherwise specified Bristol, PA USA TEL 215 781-9956 FAX 215 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

PDF Datasheet Preview

Series 351000 SSOP IC to DIP Adapter RoHS/ WEEE Compliant

FEATURES:
• RoHS/ WEEE Compliant
• Allows the use of .65mm pitch surface mount ICs in
thru-hole designs.
• Ideal for prototyping and testing/evaluating SSOP ICs.
• Adapter can be cut to smaller sizes by end user
• Consult factory for panelized form or for mounting of
consigned ICs.

SPECIFICATIONS:
• Adapter body is thick FR406 or IS410 per

IPC4101A/26 with 1 ounce minimum Copper traces
both sides.
• Pad are finished with ENIG Immersion Gold over

Electroless Nickel
• Pins are Brass Alloy 360 1/2 hard per UNS C36000

ASTM-B16-00.
• Pin plating is 10 u Min. Gold per MIL-G-45204 over 100 u

Min. Nickel per SAE-AMS-QQ-N-290.

Note Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice.
• Current rating=1 Amp.
• Operating temperature=221°F [105°C].
ORDERING INFORMATION

MOUNTING CONSIDERATIONS
• Suggested PCB hole size=.028 ± ± dia.

XX-351000-11-RC
• Will plug into standard IC sockets. ALL DIMENSIONS INCHES [MILLIMETERS]

No. of pins 14, 16, 18, 20, 24, 28 Series

Gold plated solder tail pin
“A”=NO. OF PINS PER ROW X
“B”= NO. OF PINS PER ROW - 1 X
“C”= NO. OF PADS PER ROW - 1 X

All tolerances ± unless otherwise specified

Bristol, PA USA TEL 215 781-9956 FAX 215 781-9845

PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

More datasheets: DS1073M-80 | DS1073M-100 | DS1073Z-100 | DS1073Z-66 | DS1073Z-80 | 3SUGC | 28-351000-11-RC | 20-351000-11-RC | 14-351000-11-RC | 16-351000-11-RC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 18-351000-11-RC Datasheet file may be downloaded here without warranties.

Datasheet ID: 18-351000-11-RC 518369