WES51

WES51 Datasheet

WES51 Analog Soldering Station

Part	Datasheet
WES51	WES51 (pdf)

PDF Datasheet Preview
SOLDERING STATIONS WES51 Analog Soldering Station The Weller Advantage WES51PU • Innovative heater and sensor combination gives you quick heat-up and rapid temperature recovery • Wireless temperature lockout to prevent operators from raising the temperature to levels higher than specified for the board or component. Gives you control over the process • Station automatically powers down after 90 minutes of inactivity to prolong tip life and save power PH50 PES51 WES51 includes WES51PU power unit, PES51 soldering pencil with ETA tip, and PH50 stand and sponge. Additional Product Features and Benefits • IMPROVED plug on the PES51 iron and new receptacle on the WES51PU power unit for easier iron replacement • Designed for continuous production soldering • Slim, comfortable pencil reduces operator fatigue • Tip temperature offset capability which provides the user with the capability of resetting station temperature readings to match in tip sizes and styles • Iron is fitted with a non-burnable silicon rubber cord for safety • UL and cUL listed • ESD safe to protect sensitive components • Use ET series tips found on page 5 Station Voltage Temperature Range Footprint Weight Temperature Accuracy Temperature Stability ESD Safe? WES51 120V input 24V output 350°F - 850°F 177°C - 454°C X IN 150 X 114 X 91 MM lb. kg +/- 9°F +/-5°C +/-10°F 6°C Yes Pencil Power Consumption Heating Element Type Iron Cord Length Supplied Tip Iron Stand PES51 50W Nichrome Wound Fiberglass and ceramic insulated 4 ft. m ETA PH50 Applications • Production, rework, and repair of through hole and SMT boards. Most ground planes and multi-layer boards. The PES51 is perfect for production soldering, rework, or repair. The new connector and plug on the WES51 is an improvement over the WES50

PDF Datasheet Preview

SOLDERING STATIONS

WES51 Analog Soldering Station

The Weller Advantage

WES51PU
• Innovative heater and sensor combination gives you quick heat-up and rapid temperature recovery
• Wireless temperature lockout to prevent operators from raising the temperature to levels higher than specified for the board or component. Gives you control over the process
• Station automatically powers down after 90 minutes of inactivity to prolong tip life and save power

PH50

PES51 WES51 includes WES51PU power unit, PES51 soldering pencil with ETA tip, and PH50 stand and sponge.

Additional Product Features and Benefits
• IMPROVED plug on the PES51 iron and new receptacle on the WES51PU power unit for easier iron replacement
• Designed for continuous production soldering
• Slim, comfortable pencil reduces operator fatigue
• Tip temperature offset capability which provides the user with the capability of resetting station temperature readings to
match in tip sizes and styles
• Iron is fitted with a non-burnable silicon rubber cord for safety
• UL and cUL listed
• ESD safe to protect sensitive components
• Use ET series tips found on page 5

Station Voltage Temperature Range Footprint Weight Temperature Accuracy Temperature Stability ESD Safe?

WES51 120V input 24V output 350°F - 850°F 177°C - 454°C X IN 150 X 114 X 91 MM lb. kg +/- 9°F +/-5°C +/-10°F 6°C Yes

Pencil Power Consumption Heating Element Type Iron Cord Length Supplied Tip Iron Stand

PES51 50W Nichrome Wound Fiberglass and ceramic insulated 4 ft. m ETA PH50

Applications
• Production, rework, and repair of through hole and SMT boards. Most ground planes and multi-layer boards.

The PES51 is perfect for production soldering, rework, or repair.

The new connector and plug on the WES51 is an improvement over the WES50

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived WES51 Datasheet file may be downloaded here without warranties.

Datasheet ID: WES51 506841