PA86EU

PA86EU Datasheet

PA86

Part	Datasheet
PA86EU	PA86EU (pdf)

PDF Datasheet Preview
MICROTECHNOLOGY PA86 • A UNIQUE Patent Pending TECHNIQUE FOR VERY LOW QUIESCENT CURRENT • OVER 350 V/µS SLEW RATE • WIDE SUPPLY VOLTAGE • Single Supply 20V to 250V • Split Supplies 10V to 125V • OUTPUT 150mA cont. 200mA Pk • UP TO 23 WATT DISSIPATION CAPABILITY • OVER 200 kHz POWER BANDWIDTH • PIEZOELECTRIC POSITIONING AND ACTUATION • ELECTROSTATIC DEFLECTION • DEFORMABLE MIRROR ACTUATORS • CHEMICAL AND BIOLOGICAL STIMULATORS The PA86 is a high voltage, high speed Precision IC power op amp with performance and unique features not found previously in any commercially available OpAmp Novel input stage design of this amplifier provides extremely high slew rates in pulse applications while maintaining low quiescent current of under 1mA. This novel input stage also has the effect of adding variables to the power response and slew rate characteristics of the amplifier. To a lesser degree, there are also input related effects on unity gain bandwidth and phase. It is important to note that the slew rate is a strong function of input voltage amplitude. It should be noted that the package tab needs to be connected to a stable reference such as GND for high slew rates. Please refer to special considerations section for details. The output stages are well protected with user defined current limit although the Safe Operating Area SOA must be observed for reliable protection. Proper heatsinking is required for maintaining maximum reliability. External phase compensation provides the user with great flexibility in trading gain, stability and bandwidth. BLOCK DIAGRAM 7065 #6''&3 SIP PACKAGE STYLE EU LEAD FORM EW The PA86 is ideally suited to driving continuous drop ink jet systems, in both piezo actuation and deflection applications. The deflection amplifier shown above achieves accurate droplet displacement at high speeds to deposit crisp, clear lot code information on product containers. The external compensation networks have been optimized to match the gain of the circuit and the complex impedance of the load. The combination of high voltage and high speed allow repeatable low cost deflection of droplets for high production environments. 7065m 7065 APEX MICROTECHNOLOGY CORPORATION • TELEPHONE 520 • FAX 520 • ORDERS 520 • EMAIL PA86 ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS SUPPLY VOLTAGE, +VS to −VS OUTPUT CURRENT, peak 200ms POWER DISSIPATION, internal, DC INPUT VOLTAGE, Differential INPUT VOLTAGE, Common Mode TEMPERATURE, pin solder, 10s, EU TEMPERATURE, junction2 TEMPERATURE RANGE, storage OPERATING TEMPERATURE, case 250V 200mA, within SOA 23W ±15V ±Vs 260°C 150°C. −55 to 125°C −40 to 125°C SPECIFICATIONS PARAMETER TEST CONDITIONS1 UNITS INPUT OFFSET VOLTAGE OFFSET VOLTAGE vs. temperature 0 to 125°C CaseTemperature −63 OFFSET VOLTAGE vs. supply BIAS CURRENT, initial OFFSET CURRENT, initial INPUT RESISTANCE, DC COMMON MODE VOLTAGE RANGE, pos. COMMON MODE VOLTAGE RANGE, neg. COMMON MODE REJECTION, DC +VS 2 + NOISE

PDF Datasheet Preview

MICROTECHNOLOGY

PA86
• A UNIQUE Patent Pending TECHNIQUE FOR VERY LOW QUIESCENT CURRENT
• OVER 350 V/µS SLEW RATE
• WIDE SUPPLY VOLTAGE
• Single Supply 20V to 250V
• Split Supplies 10V to 125V
• OUTPUT 150mA cont. 200mA Pk
• UP TO 23 WATT DISSIPATION CAPABILITY
• OVER 200 kHz POWER BANDWIDTH
• PIEZOELECTRIC POSITIONING AND ACTUATION
• ELECTROSTATIC DEFLECTION
• DEFORMABLE MIRROR ACTUATORS
• CHEMICAL AND BIOLOGICAL STIMULATORS

The PA86 is a high voltage, high speed Precision IC power op amp with performance and unique features not found previously in any commercially available OpAmp

Novel input stage design of this amplifier provides extremely high slew rates in pulse applications while maintaining low quiescent current of under 1mA. This novel input stage also has the effect of adding variables to the power response and slew rate characteristics of the amplifier. To a lesser degree, there are also input related effects on unity gain bandwidth and phase. It is important to note that the slew rate is a strong function of input voltage amplitude. It should be noted that the package tab needs to be connected to a stable reference such as GND for high slew rates. Please refer to special considerations section for details.

The output stages are well protected with user defined current limit although the Safe Operating Area SOA must be observed for reliable protection. Proper heatsinking is required for maintaining maximum reliability. External phase compensation provides the user with great flexibility in trading gain, stability and bandwidth.

BLOCK DIAGRAM
7065
#6''&3

SIP PACKAGE STYLE EU

LEAD FORM EW

The PA86 is ideally suited to driving continuous drop ink jet systems, in both piezo actuation and deflection applications. The deflection amplifier shown above achieves accurate droplet displacement at high speeds to deposit crisp, clear lot code information on product containers. The external compensation networks have been optimized to match the gain of the circuit and the complex impedance of the load. The combination of high voltage and high speed allow repeatable low cost deflection of droplets for high production environments.
7065m
7065

APEX MICROTECHNOLOGY CORPORATION
• TELEPHONE 520
• FAX 520
• ORDERS 520
• EMAIL

PA86

ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS

ABSOLUTE MAXIMUM RATINGS

SUPPLY VOLTAGE, +VS to −VS OUTPUT CURRENT, peak 200ms POWER DISSIPATION, internal, DC INPUT VOLTAGE, Differential INPUT VOLTAGE, Common Mode TEMPERATURE, pin solder, 10s, EU TEMPERATURE, junction2 TEMPERATURE RANGE, storage OPERATING TEMPERATURE, case
250V 200mA, within SOA 23W ±15V ±Vs 260°C 150°C. −55 to 125°C −40 to 125°C

SPECIFICATIONS

PARAMETER

TEST CONDITIONS1

UNITS

INPUT

OFFSET VOLTAGE

OFFSET VOLTAGE vs. temperature
0 to 125°C CaseTemperature
−63

OFFSET VOLTAGE vs. supply

BIAS CURRENT, initial

OFFSET CURRENT, initial

INPUT RESISTANCE, DC

COMMON MODE VOLTAGE RANGE, pos.

COMMON MODE VOLTAGE RANGE, neg.

COMMON MODE REJECTION, DC
+VS 2 +

NOISE

More datasheets: 201619 BK001 | 201619 GR013 | 201619 RD013 | 201619 SL013 | 201619 WH001 | 201619 WH013 | 201619 YL001 | 201619 BR001 | 201619 BR013 | 76000858

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PA86EU Datasheet file may be downloaded here without warranties.

Datasheet ID: PA86EU 523246