VL1CKGP600

VL1CKGP600 Datasheet

Red VL1000P600 VL100GP600

Part	Datasheet
VL1CKGP600	VL1CKGP600 (pdf)

Related Parts	Information
VL3CK0P500	VL3CK0P500
VL300GP600	VL300GP600
VL3CK0P300	VL3CK0P300
VL3CK0P600	VL3CK0P600
VL1CK0P600	VL1CK0P600
VL1CKGP300	VL1CKGP300
VL1CKGP500	VL1CKGP500
VL1CK0P500	VL1CK0P500
VL100GP600	VL100GP600
VL100GP300	VL100GP300
VL1CK0P300	VL1CK0P300
VL3000P300	VL3000P300
VL1000P300	VL1000P300
VL300GP300	VL300GP300

PDF Datasheet Preview
VL series Professional LED indicators Distinctive features and specifications Indicators with red, yellow or green built-in LED Antirotation flatted bushing 2 bushing diameters 6 mm and 8 mm Sealed or unsealed Bright or matt black chrome finish ELECTRICAL SPECIFICATIONS • Insulation resistance min. • Dielectric strength 250 Vrms 50 Hz min. • Electrical life at high temperature 72 H at 85°C LED specifications TA 25°C • Correct polarity of D.C supply to diode electrodes must be observed - longer lead anode + - shorter lead cathode - on flat side of bushing see drawings . • The LED is not removable. MATERIALS • Bushing and collar brass, bright or matt black chrome plated • Lens polycarbonate • LED GENERAL SPECIFICATIONS • Torque 1,25 Nm Ft.lb max. applied to nut • Climatic category 40/085/21 • Protection level for sealed models: IP 67 according to IEC 529 • In accordance with NFC 93680 standard PANEL CUT-OUT For Ø 6 For Ø 8 STANDARD HARDWARE For Ø 6 For Ø 8 Ø6 x DIA x IS Ø8 x DIA x IS ABOUT THIS SERIES Complete part numbers are shown on the following pages. I Dimensions first dimensions are in mm while inches are shown as bracketted numbers. Mounting accessories standard hardware supplied with all models nickel plated hex nut 9 mm across flats for indicators Ø 6 or 10 mm across flats for indicators Ø 8 Packaging unit 50 pieces. APEM VL series Professional LED indicators Diameter 6 - unsealed ➞ Flat LED colour Bright finish standard Matt black finish x DIA x IS Red VL1000P600 VL100GP600 Yellow VL1000P500 VL100GP500 Green VL1000P300 VL100GP300 Maxi

PDF Datasheet Preview

VL series

Professional LED indicators

Distinctive features and specifications

Indicators with red, yellow or green built-in LED Antirotation flatted bushing 2 bushing diameters 6 mm and 8 mm Sealed or unsealed Bright or matt black chrome finish

ELECTRICAL SPECIFICATIONS
• Insulation resistance min.
• Dielectric strength 250 Vrms 50 Hz min.
• Electrical life at high temperature 72 H at 85°C

LED specifications TA 25°C
• Correct polarity of D.C supply to diode electrodes must be observed - longer lead anode + - shorter lead cathode - on flat side of bushing see drawings .
• The LED is not removable.

MATERIALS
• Bushing and collar brass, bright or matt black chrome plated
• Lens polycarbonate
• LED

GENERAL SPECIFICATIONS
• Torque 1,25 Nm Ft.lb max. applied to nut
• Climatic category 40/085/21
• Protection level for sealed models:

IP 67 according to IEC 529
• In accordance with NFC 93680
standard

PANEL CUT-OUT

For Ø 6

For Ø 8

STANDARD HARDWARE

For Ø 6

For Ø 8
Ø6 x DIA x IS
Ø8 x DIA x IS

ABOUT THIS SERIES Complete part numbers are shown on the following pages.

I Dimensions first dimensions are in mm while inches are shown as bracketted numbers.

Mounting accessories standard hardware supplied with all models nickel plated hex nut 9 mm across flats for indicators Ø 6 or 10 mm across flats for indicators Ø 8

Packaging unit 50 pieces.

APEM

VL series

Professional LED indicators

Diameter 6 - unsealed
➞ Flat

LED colour

Bright finish standard

Matt black finish
x DIA x IS

Red VL1000P600 VL100GP600

Yellow VL1000P500 VL100GP500 Green VL1000P300 VL100GP300

Maxi

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived VL1CKGP600 Datasheet file may be downloaded here without warranties.

Datasheet ID: VL1CKGP600 518218