TDS08

TDS08 Datasheet

TDS SERIES SP 3 POSITION 3 STATE +,0,- DIP SWITCHES

Part	Datasheet
TDS08	TDS08 (pdf)

Related Parts	Information
TDS04	TDS04
TDS09	TDS09
TDS10	TDS10

PDF Datasheet Preview
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. TDS SERIES SP 3 POSITION 3 STATE +,0,- DIP SWITCHES FEATURES 3 code functions per position n . Self-cleaning twin point contacts. UL94V-O materials used throughout. Process compatible. Crimped terminals for positive p.c. board retention during installation. GENERAL SPECIFICATIONS ELECTRICALS Electrical life 2000 operations minimum per switch Contact rating, non-switching 100 mA at 50 VDC Contact rating, switching 25 mA at 24 VDC Contact resistance Initial:50 max. After 2000 operations 100 max. Insulation resistance 100 minimum between adjacent terms.at 500 VDC Dielectric strength 500 VDC for 1 minute Capacitance 5 pf. maximum MECHANICALS, THERMALS Mechanical life Operating force Vibration Shock Temperature range 2000 operations minimum per switch 1000 grams maximum 10-55-10 Hz./1 min. 3 planes per MIL-STD-202F, METHOD 201A 50 G peak value for 11 msec. per MIL-STD-202F, METHOD 213B Operating and storage -40°C to +85°C SOLDERING RECOMMENDATIONS* Hand soldering 320°C max. for 2 seconds max. 30 watt iron max. Wave soldering 260°C max. for 5 seconds *For best results, keep actuator in 'O' position during soldering. MATERIALS G Base Cover Actuators Contacts Terminals UL94V-O, glass fiber filled PBT, black UL94V-O, glass fiber filled PBT, black UL94V-O, glass fiber filled Nylon, white Gold over nickel over brass 90/10 Solder plate over brass PACKAGING Normally supplied in standard IC tubes with all actuators in the 'O' position MODEL NO. 0F A DIM. MAX B DIMENSION NUMBER POS. n INCHES MM INCHES MM TDS04 TDS08 TDS09 TDS10 G14 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 781 245-4531 E-mail: G01-G14 10/3/00, 3:51 AM

PDF Datasheet Preview

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

TDS SERIES SP 3 POSITION 3 STATE +,0,- DIP SWITCHES

FEATURES 3 code functions per position n . Self-cleaning twin point contacts. UL94V-O materials used throughout. Process compatible. Crimped terminals for positive p.c. board retention during installation.

GENERAL SPECIFICATIONS

ELECTRICALS

Electrical life
2000 operations minimum per switch

Contact rating, non-switching
100 mA at 50 VDC

Contact rating, switching
25 mA at 24 VDC

Contact resistance Initial:50 max. After 2000 operations 100 max.

Insulation resistance 100 minimum between adjacent terms.at 500 VDC

Dielectric strength 500 VDC for 1 minute

Capacitance
5 pf. maximum

MECHANICALS, THERMALS Mechanical life Operating force Vibration Shock Temperature range
2000 operations minimum per switch 1000 grams maximum 10-55-10 Hz./1 min. 3 planes per MIL-STD-202F, METHOD 201A 50 G peak value for 11 msec. per MIL-STD-202F, METHOD 213B Operating and storage -40°C to +85°C

SOLDERING RECOMMENDATIONS*

Hand soldering
320°C max. for 2 seconds max. 30 watt iron max.

Wave soldering
260°C max. for 5 seconds
*For best results, keep actuator in 'O' position during soldering.

MATERIALS

G Base

Cover Actuators Contacts Terminals

UL94V-O, glass fiber filled PBT, black UL94V-O, glass fiber filled PBT, black UL94V-O, glass fiber filled Nylon, white Gold over nickel over brass 90/10 Solder plate over brass

PACKAGING Normally supplied in standard IC tubes with all actuators in the 'O' position

MODEL NO. 0F A DIM. MAX B DIMENSION

NUMBER POS. n INCHES MM INCHES MM

TDS04

TDS08

TDS09

TDS10

G14 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 781 245-4531 E-mail:

G01-G14
10/3/00, 3:51 AM

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TDS08 Datasheet file may be downloaded here without warranties.

Datasheet ID: TDS08 518216