PI04090

PI04090 Datasheet

PI02090 PI04090 PI06090 PI08090 PI10090

Part	Datasheet
PI04090	PI04090 (pdf)

Related Parts	Information
PI08190	PI08190
PI06090	PI06090
PI04190	PI04190
PI02090	PI02090

PDF Datasheet Preview
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PI & PM SERIES SPST SEALED PIANO DIP SWITCHES FEATURES Built-in seal for process compatibility. High reliability. Splayed thru-hole or SMT terminals. 2, 4, 6, 8 & 10 positions. Piano style actuators. Dual in-line x term. spacing. GENERAL SPECIFICATIONS ELECTRICALS Electrical life 200 cycles min. per switch 24 VDC, 25 mA Contact rating, non-switching 100 mA at 50 VDC Contact rating, switching 25 mA at 24 VDC Contact resistance at current 100 mA 50 max. initial - 100 max. after life test Insulation resistance at 500 VDC 100 minimum Dielectric strength 300 VAC for 1 minute Capacitance 5 pf. max. between adjacent terminals MECHANICALS, THERMALS Mechanical life Operating force Vibration Shock Operating temperature range 500 cycles min. per switch 800 grams max. 10-55 Hz.per MIL-STD-202F METHOD 201A 50 G peak value for 11 msec. per MIL-STD-202F, METHOD 213B -40°C to 85°C SOLDERING & CLEANING RECOMMENDATIONS* Hand soldering 320°C max. for 2 seconds max. 30 watt iron max. Wave soldering 260°C max. for 5 seconds max. Note PM Series is vapor phase or IR reflow solderable. Force rinse, high agitation or Sealed construction permits washing with freons, alcohol, water triple bath cleaning method and steam. When vapor methods are used, do not subject switch to solvents above 51°C. * Note keep switches in “ON” position during soldering and cleaning for best results MATERIALS Base & Cover Actuators Contacts Terminals Term. Sealing Tape seal UL94V-O, high temperature thermoplastic, color black UL94V-O, high temperature thermoplastic, color Gold over nickel plated copper alloy or brass Tin/lead 90/10 solder plated copper alloy or brass Molded-in High temperature modulus Teflon internal seal PACKAGING DIP switches are shipped in standard IC tubes with all actuators in the "ON" position. Tape & reel packaging per EIA available for PM models - consult factory. SWITCH CROSS SECTION Double contact system PI & PM SCHEMATIC TYPICAL See tabulations on following page for number of positions available 10 shown A P4PEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 781 245-4531 E-mail: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

PDF Datasheet Preview

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

PI & PM SERIES SPST SEALED PIANO DIP SWITCHES

FEATURES Built-in seal for process compatibility. High reliability. Splayed thru-hole or SMT terminals. 2, 4, 6, 8 & 10 positions. Piano style actuators. Dual in-line x term. spacing.

GENERAL SPECIFICATIONS ELECTRICALS

Electrical life
200 cycles min. per switch 24 VDC, 25 mA

Contact rating, non-switching
100 mA at 50 VDC

Contact rating, switching
25 mA at 24 VDC

Contact resistance at current 100 mA 50 max. initial - 100 max. after life test

Insulation resistance at 500 VDC 100 minimum

Dielectric strength
300 VAC for 1 minute

Capacitance
5 pf. max. between adjacent terminals

MECHANICALS, THERMALS

Mechanical life Operating force Vibration Shock Operating temperature range
500 cycles min. per switch 800 grams max. 10-55 Hz.per MIL-STD-202F METHOD 201A 50 G peak value for 11 msec. per MIL-STD-202F, METHOD 213B -40°C to 85°C

SOLDERING & CLEANING RECOMMENDATIONS*

Hand soldering
320°C max. for 2 seconds max. 30 watt iron max.

Wave soldering
260°C max. for 5 seconds max. Note PM Series is vapor phase
or IR reflow solderable.

Force rinse, high agitation or

Sealed construction permits washing with freons, alcohol, water
triple bath cleaning method
and steam. When vapor methods are used, do not subject switch
to solvents above 51°C.
* Note keep switches in “ON” position during soldering and cleaning for best results

MATERIALS Base & Cover Actuators Contacts Terminals Term. Sealing Tape seal

UL94V-O, high temperature thermoplastic, color black UL94V-O, high temperature thermoplastic, color Gold over nickel plated copper alloy or brass Tin/lead 90/10 solder plated copper alloy or brass Molded-in High temperature modulus Teflon internal seal

PACKAGING DIP switches are shipped in standard IC tubes with all actuators in the "ON" position. Tape & reel packaging per EIA available for PM models - consult factory.

SWITCH CROSS SECTION

Double contact system

PI & PM

SCHEMATIC TYPICAL

See tabulations on following page for number of positions available 10 shown

A P4PEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 781 245-4531 E-mail:

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI04090 Datasheet file may be downloaded here without warranties.

Datasheet ID: PI04090 518190