NDI09S

NDI09S Datasheet

NDI & DM SERIES SPST STANDARD DIP SWITCHES

Part	Datasheet
NDI09S	NDI09S (pdf)

Related Parts	Information
NDI01H	NDI01H
NDI02H	NDI02H
NDI01S	NDI01S
NDIR01S	NDIR01S
DMR02T	DMR02T
DMR02TTR	DMR02TTR
NDI03H	NDI03H
DMR01	DMR01
DM01	DM01
NDIR02H	NDIR02H
NDIR01H	NDIR01H
DMR08TTR	DMR08TTR
NDI05H	NDI05H
DMR02	DMR02
DMR09TTR	DMR09TTR
DM02	DM02
NDIR04S	NDIR04S
DMR08T	DMR08T
NDI04H	NDI04H
DM04	DM04
DMR08	DMR08
DMR02PTTR	DMR02PTTR
NDIR03ST	NDIR03ST
NDIR02ST	NDIR02ST
DMR04T	DMR04T
DMR05T	DMR05T
DMR04	DMR04
DM10	DM10
DM05	DM05
DM06	DM06
DMR06T	DMR06T
NDIR04ST	NDIR04ST
DMR10T	DMR10T
DMR09T	DMR09T
NDI06S	NDI06S
DMR06TTR	DMR06TTR
DMR07T	DMR07T
DMR08TNTR	DMR08TNTR
NDIR06H	NDIR06H
DMR03T	DMR03T
NDIR12ST	NDIR12ST
NDIR08ST	NDIR08ST
NDI10S	NDI10S
NDIR03HT	NDIR03HT
NDIR03H	NDIR03H
NDIR03S	NDIR03S
NDIR04HT	NDIR04HT
NDIR08H	NDIR08H
NDIR04H	NDIR04H
NDI08H	NDI08H
NDI04S	NDI04S
NDI02S	NDI02S
NDIR10ST	NDIR10ST
NDIR06ST	NDIR06ST
NDIR02HT	NDIR02HT
NDIR10HT	NDIR10HT
DM12	DM12
NDIR02S	NDIR02S
NDI10H	NDI10H
DMR12TTR	DMR12TTR
NDIR05S	NDIR05S
NDIR05HT	NDIR05HT
NDI03S	NDI03S
DMR12T	DMR12T
NDIR05H	NDIR05H
NDI05S	NDI05S
NDI06H	NDI06H
DMR10	DMR10
DM09	DM09
DM08	DM08
DMR04TTR	DMR04TTR
NDIR12HT	NDIR12HT
NDI12S	NDI12S
NDIR12H	NDIR12H
NDIR09ST	NDIR09ST
NDIR12S	NDIR12S
NDIR09S	NDIR09S
NDI12H	NDI12H
NDIR10H	NDIR10H
NDIR09H	NDIR09H
NDIR10S	NDIR10S
NDIR09HT	NDIR09HT
NDIR06HT	NDIR06HT
NDI07H	NDI07H
NDIR05ST	NDIR05ST
NDIR06S	NDIR06S
NDIR07HT	NDIR07HT
NDIR07S	NDIR07S
NDIR07H	NDIR07H
NDI07S	NDI07S
NDI08S	NDI08S
NDI09H	NDI09H
NDIR07ST	NDIR07ST
NDIR08HT	NDIR08HT
NDIR08S	NDIR08S

PDF Datasheet Preview
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. NDI & DM SERIES SPST STANDARD DIP SWITCHES FEATURES High reliability. Self-cleaning contacts. Multi- positions. Process compatible with tape seal. Dual in-line x term. spacing. GENERAL SPECIFICATIONS ELECTRICALS Electrical life Contact rating, non-switching Contact rating, switching Contact resistance at current 100 mA Insulation resistance at 500 VDC Dielectric strength Capacitance 2000 cycles min. per switch 24 VDC, 25 mA 100 mA at 50 VDC 25 mA at 24 VDC 50 milliohms max. initial - 100 milliohms max. after life test 100 Megohms minimum 500 VAC for 1 minute 5 pf. max. between adjacent terminals MECHANICALS, THERMALS Mechanical life Operating force Vibration Shock Operating temperature range 2000 cycles min. per switch 1000 grams max. 10-55 Hz.per MIL-STD-202F METHOD 201A 50 G peak value for 11 msec. per MIL-STD-202F, METHOD 213B -20°C to 85°C SOLDERING & CLEANING RECOMMENDATIONS* Hand soldering 350°C max. for 2 seconds max. 30 watt iron max. Wave soldering 260°C max. for 5 seconds max. Cleaning with tape seal Spray wash from top side only. * Note keep switches in “OFF” position during soldering and cleaning for best results MATERIALS Base & Cover NDI UL94V-O, glass fiber filled PBT, black DM UL94V-O, glass fiber filled PPS, black Actuators UL94V-O, Nylon, white Contacts Gold over nickel plated copper alloy Terminals Gold plated brass. Term. Sealing Molded-in Tape seal Kapton PACKAGING DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position. Tape & reel packaging per EIA available for DMR models see next page . SWITCH CROSS SECTIONS Double contact system DI & DM SCHEMATIC TYPICAL See tabulations on following pages for number of positions available 10 shown A P2PEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 781 245-4531 E-mail: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

PDF Datasheet Preview

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

NDI & DM SERIES SPST STANDARD DIP SWITCHES

FEATURES High reliability. Self-cleaning contacts. Multi- positions. Process compatible with tape seal. Dual in-line x term. spacing.

GENERAL SPECIFICATIONS ELECTRICALS

Electrical life

Contact rating, non-switching Contact rating, switching Contact resistance at current 100 mA Insulation resistance at 500 VDC Dielectric strength Capacitance
2000 cycles min. per switch 24 VDC, 25 mA
100 mA at 50 VDC 25 mA at 24 VDC 50 milliohms max. initial - 100 milliohms max. after life test 100 Megohms minimum 500 VAC for 1 minute 5 pf. max. between adjacent terminals

MECHANICALS, THERMALS

Mechanical life Operating force Vibration Shock Operating temperature range
2000 cycles min. per switch 1000 grams max. 10-55 Hz.per MIL-STD-202F METHOD 201A 50 G peak value for 11 msec. per MIL-STD-202F, METHOD 213B -20°C to 85°C

SOLDERING & CLEANING RECOMMENDATIONS*

Hand soldering
350°C max. for 2 seconds max. 30 watt iron max.

Wave soldering
260°C max. for 5 seconds max.

Cleaning with tape seal

Spray wash from top side only.
* Note keep switches in “OFF” position during soldering and cleaning for best results

MATERIALS

Base & Cover

NDI UL94V-O, glass fiber filled PBT, black

DM UL94V-O, glass fiber filled PPS, black

Actuators

UL94V-O, Nylon, white

Contacts

Gold over nickel plated copper alloy

Terminals

Gold plated brass.

Term. Sealing

Molded-in

Tape seal

Kapton

PACKAGING DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position. Tape & reel packaging per EIA available for DMR models see next page .

SWITCH CROSS SECTIONS

Double contact system

DI & DM

SCHEMATIC TYPICAL

See tabulations on following pages for number of positions available 10 shown

A P2PEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 781 245-4531 E-mail:

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NDI09S Datasheet file may be downloaded here without warranties.

Datasheet ID: NDI09S 518182