MSSA22G

MSSA22G Datasheet


MSSA Series

Part Datasheet
MSSA22G MSSA22G MSSA22G (pdf)
PDF Datasheet Preview
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

MSSA Series

Microminiature Slide Switches

SPECIFICATIONS

Contact ratings Gold Volt-Amps VA max. at
20 V max. AC or DC Silver 100 mA at 125 VAC or 30 VDC Initial contact resistance 30 milliohms max. Insulation resistance 100 megohms min. at 250 VDC Dielectric strength 250 volts RMS at sea level Electrical life 10,000 cycles min. Operating temperature range -10°C to +60°C Actuation force 250g ± 150g Solder heat resistance 260°C max. for 3 seconds Washing not recommended

Low Profile. Epoxy sealed terminals. Cosmetic molded case.

MATERIALS

Contacts & terminals Gold or silver available see contact ratings Housing and Actuator Thermoplastic Base High temperature thermoplastic Terminal seal Epoxy

MODEL NO. PLATING MSSA22G GOLD
2P2T

TRAVEL/THROW TRAVEL/THROW

VERTICAL ACTUATOR

SCHEMATIC

MECHANICAL OUTLINE

P.C. BOARD LAYOUT

APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE 877 246-7890 FAX 978 372-3534 E-mail O5
More datasheets: 7328-10PK | 7381-10PK | 7361-10PK | 7377 | 7361 | 7371 | 3149 | 7349 | 7349F | 7381


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MSSA22G Datasheet file may be downloaded here without warranties.

Datasheet ID: MSSA22G 518178