IZNR1S42N

IZNR1S42N Datasheet


NOTICE please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories Standard hardware supplied - IZN 1 castellated nickel plated brass nut U6911 + 1 O-ring - IZM 1 castellated nickel plated brass nut U6911 + 1 silicone flat seal + 1 hex nut 19 mm across flats U4116.

Part Datasheet
IZNR1S42N IZNR1S42N IZNR1S42N (pdf)
Related Parts Information
IZPR3P422 IZPR3P422 IZPR3P422
IZPR3S422 IZPR3S422 IZPR3S422
IZPR1S462L0S IZPR1S462L0S IZPR1S462L0S
IZPP1F462 IZPP1F462 IZPP1F462
IZPR3P462 IZPR3P462 IZPR3P462
IZMP1Z45NL0S IZMP1Z45NL0S IZMP1Z45NL0S
IZNR3P422 IZNR3P422 IZNR3P422
IZPP3V272 IZPP3V272 IZPP3V272
IZPP3S432L0G IZPP3S432L0G IZPP3S432L0G
PDF Datasheet Preview
IZ series

Rear mounted sealed pushbutton switches - bushing Ø 16 - metal - latching

Distinctive features and specifications

K Rear mounting for easier installation K Latching action metal models K Fixed or variable panel thickness K Illuminated or non-illuminated K Flat actuator for optional marking K Sealed to IP67

ENVIRONMENTAL AND GENERAL SPECIFICATIONS
• Degree of protection IP67
• Temperature range -40°C to +85°C
• Total travel 2,5 mm
• Mechanical life cycles

ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load 100mA 24VDC - cycles
• Initial contact resistance 100 max.
• Insulation resistance 1 min. at 500VDC
• Dielectric strength Vrms between terminals

Vrms between terminals and frame

LED COMPONENT SPECIFICATIONS

LED colour Super red L0S

Yellow L0Y Green L0G

Blue L0B

Forward current 20mA

Typ. forward voltage Max. forward voltage
1,95V
1,95V
2,05V
3,2V
3,70V
3,2V

A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage

LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request.

MATERIALS
• Case thermpoplastic UL94-V0
• Plunger polyamide
• Bushing/bezel brass, nickel
plated
• Contacts silver, gold plated
• Multi-wire lead AWG20,
section 0,6 mm2
• LED wire AWG26,
section 0,12 mm2
• Lens polycarbonate
• Terminal seal epoxy

Dimensions First dimensions are im mm while inches are shown as bracketed numbers. Tolerance The general tolerance for dimensions in this brochure is ± 0,3 Overall dimension tolerance is ± 0,5

Dimensions, specifications and data shown in this catalogue are subject to change without notice.

APEM

IZ series

Rear mounted sealed pushbutton switches - bushing Ø 16 - metal - latching

Overview

SERIES

Model

N Metal, fixed panel thickness

M Metal, variable panel thickness

Electrical function 1 OFF - ON

Actuator shape R Round, curved P Round, flat
More datasheets: SBG3060CT-T-F | SBG3050CT-T | SBG3060CT-T | AK670/3-3-R | IZPR3P422 | IZPR3S422 | IZPR1S462L0S | IZPP1F462 | IZPR3P462 | IZMP1Z45NL0S


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IZNR1S42N Datasheet file may be downloaded here without warranties.

Datasheet ID: IZNR1S42N 518153