A10137

A10137 Datasheet

Part No. A10137

Part	Datasheet
A10137	A10137 (pdf)

PDF Datasheet Preview
GPS Co-planar Antenna Part No. A10137 Product Specification 1 Features • GPS antenna designed for embedded applications. • Balanced antenna technology. • High efficiency. • Good resistance to de-tuning. • Designed for easy integration onto PCB. • Low height, small footprint, light weight. 2 Description • Antenna for reception of GPS signals 1575MHz . • SMD antenna. • Uses matching circuit and cut-out area for optimising efficiency. The antenna has balanced antenna characteristics. The minimum populated ground plane size is 20 x 30 mm LxW The antenna has RHCP characteristics suitable for reception of GPS signals. The antenna patterns are given in section 7-2 “Radiation Patterns”. It should be noted that the radiation patterns change with the size of the ground plane as described for the two reference boards indicated in section 7-2 “Radiation Patterns”. 3 Application • Antenna for mobile phones and handheld devices with embedded GPS systems • Application specific tracking modules • Mapping software accessories USB dongle, SDIO cards, PCMCIA card. Integrated Antenna Solutions Product Specification 06MD-0001-2-PS Contents GPS Co-planar Antenna Part No. A10137 1 Features 2 Description 3 Application 4 Model name 4-1 GPS Co-Planar 4-2 Reference Board 5 Mechanical 6 Electrical 7 Performance 7-1 Return Loss 7-2 Radiation Patterns 7-2-1 3D Pattern RHCP Polarisation A10137-R 7-2-2 3D Pattern RHCP Polarisation A10137-D 8 Physical Dimensions 9 Footprint 10 General Application Guidelines 11 Lead Free Soldering 12 Test Standards Conformance 12-1 Temperature 12-2 Storage Life 12-3 Mechanical 12-4 Other 13 Hazardous Material Regulation Conformance 14 Packaging 14-1 Shelf Storage Recommendation 14-2 Tape Characteristics 14-3 Reel Dimension Ordering Part Number A10137 4-2 Reference Board There are two Reference Boards available for evaluating this product: Ordering Part Number A10137-R Size 40 x 100mm Connector Input Impedance: Ordering Part Number A10137-D Size 20 x 60mm Connector MMCX Input Impedance: 5 Mechanical Size Weight Operating Temperature PCB Mounting Resistance to Soldering Heat 9 x mm <1 g -40 to +85°C SMD 260°C for 10 seconds Integrated Antenna Solutions Product Specification 06MD-0001-2-PS GPS Co-planar Antenna Part No. A10137 6 Electrical Reference Board A10137-R Centre Frequency Bandwidth >20MHz at return loss Peak Gain RHCP Average Gain RHCP Nominal Impedance VSWR Better than ±1 MHz Average Radiation Efficiency Reference Board A10137-D Center Frequency Bandwidth >30MHz at return loss Peak Gain RHCP Average Gain RHCP Nominal Impedance VSWR Better than ±1 MHz Average Radiation Efficiency 7 Performance 7-1 Return Loss Performance data: Reference Board A10137-D Marker 1 = 1565 MHz Marker 2 = 1585 MHz Reference Board A10137-R Integrated Antenna Solutions Product Specification 06MD-0001-2-PS

PDF Datasheet Preview

GPS Co-planar Antenna

Part No. A10137

Product Specification
1 Features
• GPS antenna designed for embedded applications.
• Balanced antenna technology.
• High efficiency.
• Good resistance to de-tuning.
• Designed for easy integration onto PCB.
• Low height, small footprint, light weight.
2 Description
• Antenna for reception of GPS signals 1575MHz .
• SMD antenna.
• Uses matching circuit and cut-out area for optimising efficiency. The antenna has balanced antenna characteristics. The minimum populated ground plane size is 20 x 30 mm LxW The antenna has RHCP characteristics suitable for reception of GPS signals. The antenna patterns are given in section 7-2 “Radiation Patterns”. It should be noted that the radiation patterns change with the size of the ground plane as described for the two reference boards indicated in section 7-2 “Radiation Patterns”.
3 Application
• Antenna for mobile phones and handheld devices with embedded GPS systems
• Application specific tracking modules
• Mapping software accessories USB dongle, SDIO cards, PCMCIA card.

Integrated Antenna Solutions

Product Specification 06MD-0001-2-PS

Contents

GPS Co-planar Antenna

Part No. A10137
1 Features
2 Description
3 Application
4 Model name
4-1 GPS Co-Planar
4-2 Reference Board
5 Mechanical
6 Electrical
7 Performance
7-1 Return Loss
7-2 Radiation Patterns
7-2-1 3D Pattern RHCP Polarisation A10137-R
7-2-2 3D Pattern RHCP Polarisation A10137-D
8 Physical Dimensions
9 Footprint
10 General Application Guidelines
11 Lead Free Soldering
12 Test Standards Conformance
12-1 Temperature
12-2 Storage Life
12-3 Mechanical
12-4 Other
13 Hazardous Material Regulation Conformance
14 Packaging
14-1 Shelf Storage Recommendation
14-2 Tape Characteristics
14-3 Reel Dimension
Ordering Part Number A10137
4-2 Reference Board

There are two Reference Boards available for evaluating this product:
Ordering Part Number A10137-R

Size
40 x 100mm

Connector

Input Impedance:
Ordering Part Number A10137-D

Size
20 x 60mm

Connector

MMCX

Input Impedance:
5 Mechanical

Size Weight Operating Temperature PCB Mounting Resistance to Soldering Heat
9 x mm <1 g -40 to +85°C SMD 260°C for 10 seconds

Integrated Antenna Solutions

Product Specification 06MD-0001-2-PS

GPS Co-planar Antenna

Part No. A10137
6 Electrical

Reference Board A10137-R

Centre Frequency

Bandwidth
>20MHz at return loss

Peak Gain RHCP

Average Gain RHCP

Nominal Impedance

VSWR

Better than ±1 MHz

Average Radiation Efficiency

Reference Board A10137-D

Center Frequency

Bandwidth
>30MHz at return loss

Peak Gain RHCP

Average Gain RHCP

Nominal Impedance

VSWR

Better than ±1 MHz

Average Radiation Efficiency
7 Performance
7-1 Return Loss

Performance data:

Reference Board A10137-D Marker 1 = 1565 MHz Marker 2 = 1585 MHz

Reference Board A10137-R

Integrated Antenna Solutions

Product Specification 06MD-0001-2-PS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A10137 Datasheet file may be downloaded here without warranties.

Datasheet ID: A10137 516945