G150N50W4B

G150N50W4B Datasheet

Model G150N50W4B

Part	Datasheet
G150N50W4B	G150N50W4B (pdf)

PDF Datasheet Preview
Overview Features: x RoHS Compliant x 150 Watts x DC - GHz x AlN Ceramic x Non-Nichrome Resistive Element x Low VSWR x 100% Tested Outline Drawing Model G150N50W4B Flange Mount Termination 150 Watts, 50: The G150N50W4B is high performance Aluminum Nitride AlN flange mount termination intended as a cost competitive alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators, and for use in power combiners. The termination is also RoHS compliant! General Specifications Resistive Element Thick Film Substrate AlN Ceramic Cover Alumina Ceramic Mounting Flange Nickel Plated Copper Tolerance is r0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, r 2% Power: 150 Watts Frequency Range: DC GHz > 28 dB from DC to GHz Return Loss > 20 dB from to GHz > 15 dB from to GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Lead Length Min USA/Canada Toll Free: Europe: 315 432-8909 800 544-2414 +44 2392-232392 Model G150N50W4B Typical Performance: G150N50W4B G150N50W4B Power De-rating: Mounting Footprint and Procedure:

PDF Datasheet Preview

Overview

Features:
x RoHS Compliant x 150 Watts x DC - GHz x AlN Ceramic x Non-Nichrome Resistive

Element x Low VSWR x 100% Tested

Outline Drawing

Model G150N50W4B

Flange Mount Termination 150 Watts, 50:

The G150N50W4B is high performance Aluminum Nitride AlN flange mount termination intended as a cost competitive alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators, and for use in power combiners. The termination is also RoHS compliant!

General Specifications

Resistive Element

Thick Film

Substrate

AlN Ceramic

Cover

Alumina Ceramic

Mounting Flange

Nickel Plated Copper

Tolerance is r0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.

Electrical Specifications

Resistance Value:
50 Ohms, r 2%

Power:
150 Watts

Frequency Range:

DC GHz
> 28 dB from DC to GHz

Return Loss
> 20 dB from to GHz
> 15 dB from to GHz

Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.

Lead Length Min

USA/Canada Toll Free:

Europe:
315 432-8909 800 544-2414 +44 2392-232392

Model G150N50W4B

Typical Performance:

G150N50W4B

G150N50W4B

Power De-rating:

Mounting Footprint and Procedure:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived G150N50W4B Datasheet file may be downloaded here without warranties.

Datasheet ID: G150N50W4B 518017