Model E150N50X4E
Part | Datasheet |
---|---|
![]() |
E150N50X4E (pdf) |
PDF Datasheet Preview |
---|
Features: x RoHS Compliant x 200 Watts x DC GHz x AlN Ceramic x Non-Nichrome Resistive Element x Low VSWR x 100% Tested Outline Drawing Model E150N50X4E Flangeless Mount Termination 150 Watts, 50: The E150N50X4E is high performance Aluminum Nitride AlN termination intended as a cost competitive alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! General Specifications Resistive Element Thick film Substrate AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -50 to +200qC see de rating chart Tolerance is r0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, r 2% Power: 150 Watts Frequency Range: DC GHz Return Loss 25dB DC GHz 20dB DC GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES USA/Canada Toll Free: Europe: 315 432-8909 800 544-2414 +44 2392-232392 1 of 2 Model E150N50X4E Return Loss dB Typical Performance: E150N50X4E F [GHz] E150N50X4E 30 20 -170 -160 |
More datasheets: 3483-120M | 3483-100M | 3483-6R8M | 3483-4R7M | 3483-3R3M | 3483-2R2M | 3483-1R5M | 3483-1R0M | 3483-150M | S3483-4R7M |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived E150N50X4E Datasheet file may be downloaded here without warranties.