C100N50Z4A

C100N50Z4A Datasheet

Model C100N50Z4A

Part	Datasheet
C100N50Z4A	C100N50Z4A (pdf)

PDF Datasheet Preview
Features: • RoHS Compliant • 100 Watts • DC GHz • AlN Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested • Small Size Outline Drawing Model C100N50Z4A Surface Mount Termination 100 Watts, 50Ω The C100N50Z4A is high performance Aluminum Nitride AlN surface mount termination intended as a cost competitive alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also RoHS compliant! General Specifications Resistive Element Thick film Substrate AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -55 to +200°C see de rating chart Tolerance is unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, ± 2% Power: 100 Watts Frequency Range: DC GHz Return Loss >24 dB DC - GHz >20 dB DC - GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES Available on Tape and Reel For Pick and Place Manufacturing. 1 of 2 USA/Canada Toll Free: Europe: 315 432-8909 800 544-2414 +44 2392-232392 Model C100N50Z4A Typical Performance C100N50Z4A C100N50Z4A Power De-rating: Tape & Reel: *Actual performance could be limited by the solder properties of the application Mounting Footprint and Procedure: USA/Canada Toll Free Europe:

PDF Datasheet Preview

Features:
• RoHS Compliant
• 100 Watts
• DC GHz
• AlN Ceramic
• Non-Nichrome Resistive

Element
• Low VSWR
• 100% Tested
• Small Size

Outline Drawing

Model C100N50Z4A

Surface Mount Termination 100 Watts, 50Ω

The C100N50Z4A is high performance Aluminum Nitride AlN surface mount termination intended as a cost competitive alternative to Beryllium Oxide BeO . The termination is well suited to all cellular frequency bands such as AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. The termination is also RoHS compliant!

General Specifications

Resistive Element

Thick film

Substrate

AlN Ceramic

Terminal Finish

Matte Tin over Nickel Barrier

Operating Temperature -55 to +200°C see de rating chart

Tolerance is unless otherwise specified. Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions in inches.

Electrical Specifications

Resistance Value:
50 Ohms, ± 2%

Power:
100 Watts

Frequency Range:

DC GHz

Return Loss
>24 dB DC - GHz >20 dB DC - GHz

Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES

Available on Tape and Reel For Pick and Place Manufacturing.
1 of 2

USA/Canada Toll Free:

Europe:
315 432-8909 800 544-2414 +44 2392-232392

Model C100N50Z4A

Typical Performance C100N50Z4A

C100N50Z4A

Power De-rating:

Tape & Reel:
*Actual performance could be limited by the solder properties of the application

Mounting Footprint and Procedure:

USA/Canada Toll Free Europe:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived C100N50Z4A Datasheet file may be downloaded here without warranties.

Datasheet ID: C100N50Z4A 518013