123585-HMC859LC3

123585-HMC859LC3 Datasheet

List of Materials for Evaluation PCB 123585 [1]

Part	Datasheet
123585-HMC859LC3	123585-HMC859LC3 (pdf)

Related Parts	Information
HMC859LC3	HMC859LC3

PDF Datasheet Preview
v00.0910 HMC859LC3 26 GHz, DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT The HMC859LC3 is ideal for • High Speed Frequency Divider up to 26 GHz • Clock Synthesis • Phase Locked Loops • Broadband Test & Measurement Supports Clock Frequencies up to 26 GHz Differential or Single-Ended Operation Fast Rise and Fall Times 19 / 17 ps Low Power Consumption 320 mW typ. Programmable Differential Output Voltage Swing 800 - 1900 mVp-p Propagation Delay 146 ps Single Supply V 16 Lead Ceramic 3x3 mm SMT Package 9 mm2 Functional Diagram All differential inputs to the HMC859LC3 are CML and terminated on-chip with 50 Ohms to the positive supply, GND, and may be DC or AC coupled. Outputs can be connected directly to a 50 Ohm ground-terminated system or drive devices with CML logic input. the HMC859LC3 also features an ouput level control pin, VR, which allows for loss compensation or signal level optimization. The HMC859LC3 operates from a single V supply and is available in ROHS-compliant 3x3 mm SMT package. Electrical Specifications, TA = +25 ºC Vee = V, VR = 0 V Parameter Conditions Min. Power Supply Voltage Power Supply Current Maximum Clock Rate Input Voltage Range Input Differential Range Input Return Loss Frequency <25 GHz Output Amplitude Single-Ended, peak-to-peak Differential, peak-to-peak Output High Voltage Output Low Voltage Typ. 97 26 10 825 1650 -15 -840 Units Vp-p mVp-p mVp-p For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or v00.0910 HMC859LC3 26 GHz, DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE Electrical Specifications continued Parameter Conditions Output Rise / Fall Time Differential, 20% - 80% Output Return Loss Random Jitter Jr Frequency <14 GHz rms [1] [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Arlon 25FR or Rogers 4350 connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Install jumper on JP1 to short VR to GND for normal operation. For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or Application Circuit v00.0910 HMC859LC3 26 GHz, DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or

PDF Datasheet Preview

v00.0910

HMC859LC3
26 GHz, DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE

HIGH SPEED LOGIC - SMT

The HMC859LC3 is ideal for
• High Speed Frequency Divider up to 26 GHz
• Clock Synthesis
• Phase Locked Loops
• Broadband Test & Measurement

Supports Clock Frequencies up to 26 GHz Differential or Single-Ended Operation Fast Rise and Fall Times 19 / 17 ps Low Power Consumption 320 mW typ. Programmable Differential

Output Voltage Swing 800 - 1900 mVp-p Propagation Delay 146 ps Single Supply V 16 Lead Ceramic 3x3 mm SMT Package 9 mm2

Functional Diagram

All differential inputs to the HMC859LC3 are CML and terminated on-chip with 50 Ohms to the positive supply, GND, and may be DC or AC coupled. Outputs can be connected directly to a 50 Ohm ground-terminated system or drive devices with CML logic input. the HMC859LC3 also features an ouput level control pin, VR, which allows for loss compensation or signal level optimization. The HMC859LC3 operates from a single V supply and is available in ROHS-compliant 3x3 mm SMT package.

Electrical Specifications, TA = +25 ºC Vee = V, VR = 0 V

Parameter

Conditions

Min.

Power Supply Voltage

Power Supply Current

Maximum Clock Rate

Input Voltage Range

Input Differential Range

Input Return Loss

Frequency <25 GHz

Output Amplitude

Single-Ended, peak-to-peak Differential, peak-to-peak

Output High Voltage

Output Low Voltage

Typ. 97 26
10 825 1650 -15 -840

Units

Vp-p
mVp-p
mVp-p

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
v00.0910

HMC859LC3
26 GHz, DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE

Electrical Specifications continued

Parameter

Conditions

Output Rise / Fall Time

Differential, 20% - 80%

Output Return Loss Random Jitter Jr

Frequency <14 GHz rms [1]
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Arlon 25FR or Rogers 4350
connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Install jumper on JP1 to short VR to GND for normal operation.

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or

Application Circuit
v00.0910

HMC859LC3
26 GHz, DIVIDE-BY-8 WITH RESET & PROGRAMMABLE OUTPUT VOLTAGE

HIGH SPEED LOGIC - SMT

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 123585-HMC859LC3 Datasheet file may be downloaded here without warranties.

Datasheet ID: 123585-HMC859LC3 636256