TMP36GRT-REEL

TMP36GRT-REEL Datasheet


Low Voltage Temperature Sensors TMP35/TMP36/TMP37

Part Datasheet
TMP36GRT-REEL TMP36GRT-REEL TMP36GRT-REEL (pdf)
PDF Datasheet Preview
Data Sheet

Low Voltage Temperature Sensors TMP35/TMP36/TMP37

Low voltage operation V to V Calibrated directly in °C 10 mV/°C scale factor 20 mV/°C on TMP37 ±2°C accuracy over temperature typ ±0.5°C linearity typ Stable with large capacitive loads Specified −40°C to +125°C, operation to +150°C Less than 50 µA quiescent current Shutdown current µA max Low self-heating Qualified for automotive applications

Environmental control systems Thermal protection Industrial process control Fire alarms Power system monitors CPU thermal management

The TMP35/TMP36/TMP37 are low voltage, precision centigrade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius centigrade temperature. The TMP35/TMP36/TMP37 do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range.

The low output impedance of the TMP35/TMP36/TMP37 and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs. All three devices are intended for single-supply operation from V to V maximum. The supply current runs well below 50 µA, providing very low than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than µA.

The TMP35 is functionally compatible with the LM35/LM45 and provides a 250 mV output at 25°C. The TMP35 reads temperatures from 10°C to 125°C. The TMP36 is specified from −40°C to +125°C, provides a 750 mV output at 25°C, and operates to 125°C from a single V supply. The TMP36 is functionally compatible with the LM50. Both the TMP35 and TMP36 have an output scale factor of 10 mV/°C.

FUNCTIONAL BLOCK DIAGRAM
+VS 2.7V TO 5.5V

SHUTDOWN

TMP35/ TMP36/ TMP37

VOUT
00337-001
00337-002

Figure

PIN CONFIGURATIONS

VOUT 1
5 GND
+VS 2 TOP VIEW Not to Scale
4 SHUTDOWN

NC = NO CONNECT

Figure RJ-5 SOT-23

VOUT 1
8 +VS

TOP VIEW

NC 3 Not to Scale 6 NC

GND 4
5 SHUTDOWN

NC = NO CONNECT

Figure R-8 SOIC_N
00337-004
123 BOTTOM VIEW Not to Scale

PIN 1, +VS PIN 2, VOUT PIN 3, GND

Figure T-3 TO-92
00337-003

The TMP37 is intended for applications over the range of 5°C to 100°C and provides an output scale factor of 20 mV/°C. The TMP37 provides a 500 mV output at 25°C. Operation extends to 150°C with reduced accuracy for all devices when operating from a 5 V supply.

The TMP35/TMP36/TMP37 are available in low cost 3-lead TO-92, 8-lead SOIC_N, and 5-lead SOT-23 surface-mount packages.

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
Data Sheet
Basic Temperature Sensor 10 Fahrenheit Thermometers 10 Average and Differential Temperature Measurement 12 Microprocessor Interrupt 13 Thermocouple Signal Conditioning with Cold-Junction 14 Using TMP35/TMP36/TMP37 Sensors in Remote Locations 15 Temperature to mA Loop Transmitter 15 Temperature-to-Frequency Converter 16 Driving Long Cables or Heavy Capacitive Loads 17 Commentary on Long-Term Stability 17 Outline Dimensions 18 Ordering Guide 19 Automotive Products 19
0 Initial Version

Data Sheet

TMP35/TMP36/TMP37

SPECIFICATIONS

VS = V to V, −40°C TA +125°C, unless otherwise noted.

Table Parameter 1 ACCURACY

TMP35/TMP36/TMP37 F Grade TMP35/TMP36/TMP37 G Grade TMP35/TMP36/TMP37 F Grade TMP35/TMP36/TMP37 G Grade Scale Factor, TMP35 Scale Factor, TMP36 Scale Factor, TMP37

Load Regulation

Power Supply Rejection Ratio

Linearity Long-Term Stability SHUTDOWN Logic High Input Voltage Logic Low Input Voltage OUTPUT TMP35 Output Voltage TMP36 Output Voltage TMP37 Output Voltage Output Voltage Range Output Load Current Short-Circuit Current Capacitive Load Driving Device Turn-On Time POWER SUPPLY Range Supply Current Supply Current Shutdown

Symbol Test Conditions/Comments

PSRR

TA = 25°C TA = 25°C Over rated temperature Over rated temperature 10°C TA 125°C −40°C TA +125°C 5°C TA 85°C 5°C TA 100°C V VS V 0 µA IL 50 µA −40°C TA +105°C −105°C TA +125°C TA = 25°C V VS V

TA = 150°C for 1000 hours

VS = V

VS = V

TA = 25°C TA = 25°C TA = 25°C

Note 2

No oscillations2

Output within ±1°C, 100 pF load2

VS ISY ON ISY OFF

Unloaded
1 Does not consider errors caused by self-heating. 2 Guaranteed but not tested.
100 0 1000
250 750 500
10000
2000 50 250 1 50

Unit
°C °C °C °C mV/°C mV/°C mV/°C mV/°C
m°C/µA m°C/µA m°C/V m°C/V °C °C
mV µA µA pF ms

V µA µA

TMP35/TMP36/TMP37

ABSOLUTE MAXIMUM RATINGS

Table Parameter1, 2 Supply Voltage Shutdown Pin

Output Pin Operating Temperature Range Die Junction Temperature Storage Temperature Range IR Reflow Soldering

Peak Temperature Time at Peak Temperature Range Ramp-Up Rate Ramp-Down Rate Time 25°C to Peak Temperature IR Reflow Package Peak Temperature Time at Peak Temperature Range Ramp-Up Rate Ramp-Down Rate Time 25°C to Peak Temperature

Rating 7V GND SHUTDOWN +VS GND VOUT +VS −55°C to +150°C 175°C −65°C to +160°C
220°C 0°C/5°C 10 sec to 20 sec 3°C/sec −6°C/sec 6 min
260°C 0°C 20 sec to 40 sec 3°C/sec −6°C/sec 8 min
ORDERING GUIDE

Model1, 2

Accuracy at 25°C °C max

TMP35FSZ-REEL

TMP35GRTZ-REEL7

TMP35GT9Z

ADW75001Z-0REEL7

TMP36FS

TMP36FS-REEL

TMP36FSZ

TMP36FSZ-REEL

TMP36GRT-REEL7

TMP36GRTZ-REEL7

TMP36GSZ

TMP36GSZ-REEL

TMP36GSZ-REEL7

TMP36GT9

TMP36GT9Z

TMP36-PT7

TMP37FT9Z

TMP37GRTZ-REEL7

Linear Operating Temperature Range 10°C to 125°C 10°C to 125°C 10°C to 125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C 5°C to 100°C 5°C to 100°C

Package Description 8-Lead Standard Small Outline Package SOIC_N 5-Lead Small Outline Transistor Package SOT-23 3-Pin Plastic Header-Style Package TO-92 5-Lead Small Outline Transistor Package SOT-23 8-Lead Standard Small Outline Package SOIC_N 8-Lead Standard Small Outline Package SOIC_N 8-Lead Standard Small Outline Package SOIC_N 8-Lead Standard Small Outline Package SOIC_N 5-Lead Small Outline Transistor Package SOT-23 5-Lead Small Outline Transistor Package SOT-23 8-Lead Standard Small Outline Package SOIC_N 8-Lead Standard Small Outline Package SOIC_N 8-Lead Standard Small Outline Package SOIC_N 3-Pin Plastic Header-Style Package TO-92 3-Pin Plastic Header-Style Package TO-92 Chips or Die 3-Pin Plastic Header-Style Package TO-92 5-Lead Small Outline Transistor Package SOT-23
1 Z = RoHS Compliant Part. 2 W = Qualified for Automotive Applications.

Package Option R-8 RJ-5 T-3-1 RJ-5 R-8 R-8 R-8 R-8 RJ-5 RJ-5 R-8 R-8 R-8 T-3-1 T-3-1

Branding #T11 #T6G

T6G #T6G

T-3-1 RJ-5
#T12

AUTOMOTIVE PRODUCTS
Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.

D00337-0-5/15 H
More datasheets: DM74ALS244AWMX | DM74ALS244AWM | DM74ALS244AN | DM74ALS244ASJ | DM74ALS244ASJX | DM74ALS244AMSA | DM74ALS244AMSAX | M52898 SL005 | M52898 SL002 | M52898 SL001


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TMP36GRT-REEL Datasheet file may be downloaded here without warranties.

Datasheet ID: TMP36GRT-REEL 517986