124694-HMC742LP5E

124694-HMC742LP5E Datasheet

124694 [1]

Part	Datasheet
124694-HMC742LP5E	124694-HMC742LP5E (pdf)

Related Parts	Information
HMC742LP5E	HMC742LP5E
124695-HMC742LP5E	124695-HMC742LP5E

PDF Datasheet Preview
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED THIS PAGE INTENTIONALLY LEFT BLANK HMC742LP5E v05.0610 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 1 The HMC742LP5E is ideal for • Cellular/3G Infrastructure • WiBro / WiMAX / 4G • Microwave Radio & VSAT • Test Equipment and Sensors • IF & RF Applications Functional Diagram to 12 dB Gain Control in dB Steps Power-up State Selection High Output IP3 +39 dBm TTL/CMOS Compatible Serial, Parallel, or latched Parallel Control dB Typical Gain Step Error Single +5V Supply 32 Lead 5x5mm SMT Package 25mm2 The HMC742LP5E is a digitally controlled variable gain amplifier which operates from 70 MHz to 4 GHz, and can be programmed to provide from dB attenuation, to 12 dB of gain, in dB steps. The HMC742LP5E delivers noise figure of 4 dB in its maximum gain state, with output IP3 of up to +39 dBm in any state. The dual mode gain control interface accepts either a three-wire serial input or a 6 bit parallel word. The HMC742LP5E also features a user selectable power up state and a serial output for cascading other serially controlled Hittite components. The HMC742LP5E is housed in an RoHS compliant 5x5 mm QFN leadless package, and requires minimal external components. Electrical Specifications, TA = +25° C, 50 Ohm System Vdd = +5V, Vs= +5V Parameter Min. Typ. Max. 70 - 1000 Min. Typ. Max. Units 500 - 4000 Gain Maximum Gain State Gain Control Range Input Return Loss Output Return Loss 70 MHz - 350 MHz Gain Accuracy Referenced to Maximum Gain State All Gain States ± + 5% of relative gain setting Max ± + 4% of relative gain setting Max 350 MHz - 1000 MHz ± + 6% of relative gain setting Max Output Power for 1 dB Compression Output Third Order Intercept Point Two-Tone Output Power= 12 dBm Each Tone Noise Figure Max Gain State [1] Reference this number when ordering complete evaluation PCB For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or 12 - 10 Evaluation PCB HMC742LP5E v05.0610 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT 12 - 11 List of Materials for Evaluation PCB [2] Item J1 - J2 PCB Mount SMA Connectors 18 Pin DC Connector J4 - J6 DC Pin C1 - C6, C8, C9 Capacitor, 0402 Pkg. [2] 100pF Capacitor. 0402 Pkg. 1000 pF Capacitor, 0402 Pkg. Capacitor, 0603 Pkg. [2] µF Capacitor, CASE A Pkg. R1 - R14 100 kOhm Resistor, 0402 Pkg. 0 Ohm Resistor, 1206 Pkg. Inductor, 0603 Pkg. [2] SW1, SW2 SPDT 4 Position DIP Switch HMC742LP5E Variable Gain Amplifier PCB [1] 116958 Evaluation PCB [1] Circuit Board Material Arlon 25FR, FR4 [2] Please reference Components for Selected Frequencies Table shown on previous page. The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or HMC742LP5E v05.0610 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or 12 - 12

PDF Datasheet Preview

Analog Devices Welcomes Hittite Microwave Corporation

NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

THIS PAGE INTENTIONALLY LEFT BLANK

HMC742LP5E
v05.0610
dB LSB GaAs MMIC 6-BIT DIGITAL

VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz

VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT
12 - 1

The HMC742LP5E is ideal for
• Cellular/3G Infrastructure
• WiBro / WiMAX / 4G
• Microwave Radio & VSAT
• Test Equipment and Sensors
• IF & RF Applications

Functional Diagram
to 12 dB Gain Control in dB Steps

Power-up State Selection

High Output IP3 +39 dBm

TTL/CMOS Compatible Serial, Parallel, or latched Parallel Control
dB Typical Gain Step Error

Single +5V Supply 32 Lead 5x5mm SMT Package 25mm2

The HMC742LP5E is a digitally controlled variable gain amplifier which operates from 70 MHz to 4 GHz, and can be programmed to provide from dB attenuation, to 12 dB of gain, in dB steps. The HMC742LP5E delivers noise figure of 4 dB in its maximum gain state, with output IP3 of up to +39 dBm in any state. The dual mode gain control interface accepts either a three-wire serial input or a 6 bit parallel word. The HMC742LP5E also features a user selectable power up state and a serial output for cascading other serially controlled Hittite components. The HMC742LP5E is housed in an RoHS compliant 5x5 mm QFN leadless package, and requires minimal external components.

Electrical Specifications, TA = +25° C, 50 Ohm System Vdd = +5V, Vs= +5V

Parameter

Min.

Typ.

Max.
70 - 1000

Min.

Typ.

Max.

Units
500 - 4000

Gain Maximum Gain State

Gain Control Range

Input Return Loss

Output Return Loss
70 MHz - 350 MHz

Gain Accuracy Referenced to Maximum Gain State All Gain States
± + 5% of relative gain setting Max ± + 4% of relative gain setting Max
350 MHz - 1000 MHz
± + 6% of relative gain setting Max

Output Power for 1 dB Compression

Output Third Order Intercept Point Two-Tone Output Power= 12 dBm Each Tone

Noise Figure Max Gain State
[1] Reference this number when ordering complete evaluation PCB

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
12 - 10

Evaluation PCB

HMC742LP5E
v05.0610
dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz

VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT
12 - 11

List of Materials for Evaluation PCB [2]

Item

J1 - J2

PCB Mount SMA Connectors
18 Pin DC Connector

J4 - J6

DC Pin

C1 - C6, C8, C9

Capacitor, 0402 Pkg. [2]
100pF Capacitor. 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.

Capacitor, 0603 Pkg. [2]
µF Capacitor, CASE A Pkg.

R1 - R14
100 kOhm Resistor, 0402 Pkg.
0 Ohm Resistor, 1206 Pkg.

Inductor, 0603 Pkg. [2]

SW1, SW2

SPDT 4 Position DIP Switch

HMC742LP5E Variable Gain Amplifier

PCB [1]
116958 Evaluation PCB
[1] Circuit Board Material Arlon 25FR, FR4 [2] Please reference Components for Selected Frequencies Table shown on previous page.

The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or

HMC742LP5E
v05.0610
dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 70 MHz - 4 GHz

VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
12 - 12

More datasheets: RV10-14Q | RV10-14L | RV10-10Q | RV10-10L | RV10-8L | AK-1394-5044 | AK-1394-3044 | A-USBPB | HMC742LP5E | 124695-HMC742LP5E

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 124694-HMC742LP5E Datasheet file may be downloaded here without warranties.

Datasheet ID: 124694-HMC742LP5E 517970