HMC647LP6ETR

HMC647LP6ETR Datasheet


The HMC647LP6 E is ideal for:

Part Datasheet
HMC647LP6ETR HMC647LP6ETR HMC647LP6ETR (pdf)
PDF Datasheet Preview
v01.0208

The HMC647LP6 E is ideal for:
• EW Receivers
• Weather & Military Radar
• Satellite Communications
• Beamforming Modules
• Phase Cancellation

Functional Diagram

HMC647LP6 / 647LP6E

GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, - GHz

Low RMS Phase Error Low Insertion Loss 4 dB High Linearity +54 dBm Positive Control Logic 360° Coverage, LSB = 28 Lead QFN Leadless SMT Package 36mm2

The HMC647LP6 E is a 6-bit digital phase shifter which is rated from - GHz, providing 360 degrees of phase coverage, with a LSB of degrees. The HMC647LP6 E features very low RMS phase error of degree and extremely low insertion loss variation of dB across all phase states. This high accuracy phase shifter is controlled with positive control logic of 0/+5V. The HMC647LP6 E is housed in a compact 6x6 mm plastic leadless SMT package and is internally matched to 50 Ohms with no external components.

PHASE SHIFTERS - SMT
9 - 40

Electrical Specifications

TA = +25° C, Vss= -5V, Vdd= +5V , Control Voltage= 0/ +5V, 50 Ohm System

Parameter

Min.

Typ.

Max.

Frequency Range

Insertion Loss*

Input Return Loss*

Output Return Loss*

Phase Error*
+6 / -15

RMS Phase Error

Insertion Loss Variation*

Input Power for 1 dB Compression

Input Third Order Intercept

Control Voltage Current

Bias Voltage Current
*Note Major States Shown

Units GHz dB deg dB dBm uA mA

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at

PHASE SHIFTERS - SMT
v01.0208

Insertion Loss, Major States Only

INSERTION LOSS dB
-12 2

FREQUENCY GHz
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350
[3] Please refer to part’s pin description and functional diagram for pin out assignments on evaluation board.

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request.
9 - 46

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at
v01.0208

HMC647LP6 / 647LP6E

GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, - GHz

PHASE SHIFTERS - SMT

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at
9 - 47
More datasheets: B39421R714U310 | SBL1035CT | SBL1040CT | SBL1050CT | SBL1060CT | SBL1030CT | SBL1045CT | 1792 | IPC-5120-30ZBE | IPC-7120-30ZBE


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC647LP6ETR Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC647LP6ETR 517964