HMC190AMS8E

HMC190AMS8E Datasheet

HMC190AMS8 / 190AMS8E

Part	Datasheet
HMC190AMS8E	HMC190AMS8E (pdf)

Related Parts	Information
EVAL01-HMC190BMS8	EVAL01-HMC190BMS8
101779-HMC190AMS8	101779-HMC190AMS8

PDF Datasheet Preview
HMC190AMS8 / 190AMS8E v01.0210 GaAs MMIC SPDT Switch DC - 3 GHz Switches - SPDT - SMT 14 - 1 The HMC190AMS8 E is ideal for • MMDS & WirelessLAN • Portable Wireless Functional Diagram Low Insertion Loss dB Ultra Small Package MSOP8 High Input IP3 +50 dBm Positive Control 0/+3V 3 µA The HMC190AMS8 E is a low cost SPDT switch in a 8-lead MSOP package. The switch can control signals from DC to 3 GHz. It is especially suited for low and medium power applications using positive control voltages. The two control voltages require a minimal amount of DC current, which is optimal for battery powered radio systems at and GHz. The HMC190AMS8 E provides exceptional third order intermodulation performance of +50 dBm. The design has been optimized for the small MSOP package, and maintains a VSWR of better than up to 2 GHz. This device is the positive control MSOP8 packaged version of our HMC239S8 negative control device. Electrical Specifications, TA = +25° C, Vctl = 0/+3 to +8 Vdc Insertion Loss Parameter Frequency Min. DC - GHz DC - GHz DC - GHz DC - GHz Isolation DC - GHz DC - GHz DC - GHz DC - GHz Return Loss DC - GHz DC - GHz DC - GHz DC - GHz Input Power for 1 dB Compression Vctl = 0/+5V - GHz - GHz Input Third Order Intercept Vctl = 0/+5V Two-tone Input Power = +7 dBm Each Tone - GHz - GHz Switching Characteristics DC - GHz tRISE, tFALL 10/90% RF tON, tOFF 50% CTL to 10/90% RF Typ. Max. Units For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 Ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or 14 - 6

PDF Datasheet Preview

HMC190AMS8 / 190AMS8E
v01.0210

GaAs MMIC SPDT Switch DC - 3 GHz

Switches - SPDT - SMT
14 - 1

The HMC190AMS8 E is ideal for
• MMDS & WirelessLAN
• Portable Wireless

Functional Diagram

Low Insertion Loss dB

Ultra Small Package MSOP8

High Input IP3 +50 dBm

Positive Control 0/+3V 3 µA

The HMC190AMS8 E is a low cost SPDT switch in a 8-lead MSOP package. The switch can control signals from DC to 3 GHz. It is especially suited for low and medium power applications using positive control voltages. The two control voltages require a minimal amount of DC current, which is optimal for battery powered radio systems at and GHz. The HMC190AMS8 E provides exceptional third order intermodulation performance of +50 dBm. The design has been optimized for the small MSOP package, and maintains a VSWR of better than up to 2 GHz. This device is the positive control MSOP8 packaged version of our HMC239S8 negative control device.

Electrical Specifications, TA = +25° C, Vctl = 0/+3 to +8 Vdc

Insertion Loss

Parameter

Frequency

Min.

DC - GHz DC - GHz DC - GHz DC - GHz

Isolation

DC - GHz

DC - GHz

DC - GHz

DC - GHz

Return Loss

DC - GHz

DC - GHz

DC - GHz

DC - GHz

Input Power for 1 dB Compression Vctl = 0/+5V
- GHz
- GHz

Input Third Order Intercept Vctl = 0/+5V Two-tone Input Power = +7 dBm Each Tone
- GHz
- GHz

Switching Characteristics

DC - GHz
tRISE, tFALL 10/90% RF tON, tOFF 50% CTL to 10/90% RF

Typ.

Max.

Units

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 Ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request.

For price, delivery and to place orders Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at Application Support Phone 978-250-3343 or
14 - 6

More datasheets: 43-01165 | 43-01163 | 43-01164 | 43-01162 | CY25403SXC-009T | CY25403SXC-009 | 705 | DFR0057 | EVAL01-HMC190BMS8 | 101779-HMC190AMS8

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC190AMS8E Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC190AMS8E 517920