HMC141C8

HMC141C8 Datasheet

The HMC141C8 is ideal for<br>• Microwave Point-to-Point Radios<br>• VSAT Ground Equipment

Part	Datasheet
HMC141C8	HMC141C8 (pdf)

PDF Datasheet Preview
v04.0504 The HMC141C8 is ideal for • Microwave Point-to-Point Radios • VSAT Ground Equipment Functional Diagram HMC141C8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 6 - 15 GHz Input IP3 +21 dBm Conversion Loss dB LO to RF Isolation 35 dB The HMC141C8 is a miniature passive doublebalanced mixer in a non-hermetic ceramic surface mount package that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range. The mixer can handle larger signal levels than most active mixers due to the high third order intercept of 20 dBm. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/IF isolations and unit-to-unit consistency. This mixer has applications where small size and surface mount compatibility are important. MIXERS - DBL-BAL - SMT Electrical Specifications, TA = +25° C, LO Drive = +15 dBm Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation IP3 Input IP2 Input 1 dB Gain Compression Input Min. Typ. Max. Min. 7 - 10 DC - 2 Typ. 6 - DC - 2 30 17 20 45 10 Max. Units GHz dB dBm 9 - 16 For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at MIXERS - DBL-BAL - SMT v04.0504 HMC141C8 GaAs MMIC SMT DOUBLEBALANCED MIXER, 6 - 15 GHz Conversion Loss Isolation CONVERSION LOSS dB -20 2 3 4 5 6 7 8 9 10 11 12 13 14 15 FREQUENCY GHz ISOLATION dB -10 RF/IF LO/IF LO/RF -50 3 4 5 6 7 8 9 10 11 12 13 14 15 FREQUENCY GHz Conversion Loss vs. LO Power +15 dBm +17 dBm +13 dBm CONVERSION LOSS dB +10 dBm [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at 9 - 19

PDF Datasheet Preview

v04.0504

The HMC141C8 is ideal for
• Microwave Point-to-Point Radios
• VSAT Ground Equipment

Functional Diagram

HMC141C8

GaAs MMIC SMT DOUBLEBALANCED MIXER, 6 - 15 GHz

Input IP3 +21 dBm Conversion Loss dB LO to RF Isolation 35 dB

The HMC141C8 is a miniature passive doublebalanced mixer in a non-hermetic ceramic surface mount package that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range. The mixer can handle larger signal levels than most active mixers due to the high third order intercept of 20 dBm. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/IF isolations and unit-to-unit consistency. This mixer has applications where small size and surface mount compatibility are important.

MIXERS - DBL-BAL - SMT

Electrical Specifications, TA = +25° C, LO Drive = +15 dBm

Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation IP3 Input IP2 Input 1 dB Gain Compression Input

Min.

Typ.

Max.

Min.
7 - 10

DC - 2

Typ. 6 - DC - 2
30 17 20 45 10

Max.

Units GHz dB dBm
9 - 16

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at

MIXERS - DBL-BAL - SMT
v04.0504

HMC141C8

GaAs MMIC SMT DOUBLEBALANCED MIXER, 6 - 15 GHz

Conversion Loss

Isolation

CONVERSION LOSS dB
-20 2 3 4 5 6 7 8 9 10 11 12 13 14 15 FREQUENCY GHz

ISOLATION dB
-10 RF/IF

LO/IF

LO/RF
-50 3 4 5 6 7 8 9 10 11 12 13 14 15 FREQUENCY GHz

Conversion Loss vs. LO Power
+15 dBm
+17 dBm
+13 dBm

CONVERSION LOSS dB
+10 dBm
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at
9 - 19

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HMC141C8 Datasheet file may be downloaded here without warranties.

Datasheet ID: HMC141C8 517918