ADG432BNZ

ADG432BNZ Datasheet

ADG431/ADG432/ADG433

Part	Datasheet
ADG432BNZ	ADG432BNZ (pdf)

Related Parts	Information
ADG431BN	ADG431BN
ADG431ABR-REEL7	ADG431ABR-REEL7
ADG433BN	ADG433BN
ADG433BNZ	ADG433BNZ

PDF Datasheet Preview
LC2MOS Precision Quad SPST Switches ADG431/ADG432/ADG433 FEATURES 44 V Supply Maximum Ratings V Analog Signal Range Low On Resistance <24 Ultralow Power Dissipation Low Leakage nA Fast Switching Times tON <165 ns tOFF <130 ns Break-Before-Make Switching Action TTL/CMOS Compatible Plug-in Replacement for DG411/DG412/DG413 APPLICATIONS Audio and Video Switching Automatic Test Equipment Precision Data Acquisition Battery Powered Systems Sample Hold Systems Communication Systems GENERAL DESCRIPTION The ADG431, ADG432 and ADG433 are monolithic CMOS devices comprising four independently selectable switches. They are designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance. The on resistance profile is very flat over the full analog input range ensuring excellent linearity and low distortion when switching audio signals. Fast switching speed coupled with high signal bandwidth also make the parts suitable for video signal switching. CMOS construction ensures ultralow power dissipation making the parts ideally suited for portable and battery powered instruments. The ADG431, ADG432 and ADG433 contain four independent SPST switches. The ADG431 and ADG432 differ only in that the digital control logic is inverted. The ADG431 switches are turned on with a logic low on the appropriate control input, while a logic high is required for the ADG432. The ADG433 has two switches with digital control logic similar to that of the ADG431 while the logic is inverted on the other two switches. Each switch conducts equally well in both directions when ON and has an input signal range which extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked. All switches exhibit break before make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs. FUNCTIONAL BLOCK DIAGRAMS ADG431 ADG432 S2 IN2 ADG433 D3 S4 IN4 SWITCHES SHOWN FOR A LOGIC "1" INPUT PRODUCT HIGHLIGHTS Extended Signal Range The ADG431, ADG432 and ADG433 are fabricated on an enhanced LC2MOS process giving an increased signal range which extends fully to the supply rails. Ultralow Power Dissipation Low RON Break-Before-Make Switching This prevents channel shorting when the switches are configured as a multiplexer. Single Supply Operation For applications where the analog signal is unipolar, the ADG431, ADG432, and ADG433 can be operated from a single rail power supply. The parts are fully specified with a single 12 V power supply and will remain functional with single supplies as low as 5 V. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel 781/329-4700 World Wide Web Site: Fax 781/326-8703 Analog Devices, Inc., 2001 Dual Supply VDD = +15 V 10%, VSS = V 10%, VL = +5 V 10%, GND = O V, unless otherwise noted. Parameter ANALOG SWITCH Analog Signal Range RON RON vs. VD VS RON Drift RON Match LEAKAGE CURRENTS Source OFF Leakage IS OFF Drain OFF Leakage ID OFF Channel ON Leakage ID, IS ON DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current IINL or IINH CIN Digital Input Capacitance DYNAMIC CHARACTERISTICS1 tOFF Break-Before-Make Time Delay, tD ADG433 Only B Version VDD to VSS 17 90 165 ORDERING GUIDE Model Temperature Range Package Option1 ADG431BN ADG431BR ADG431ABR ADG432BN ADG432BR ADG432ABR ADG433BN ADG433BR ADG433ABR to +85°C to +85°C to +85°C to +85°C to +85°C to +85°C to +85°C to +85°C to +85°C N-16 R-16A R-16A2 N-16 R-16A R-16A2 N-16 R-16A R-16A2 NOTES 1N = Plastic DIP R = Small Outline IC SOIC . 2Trench isolated, latch-up proof parts. See Trench Isolation section. TERMINOLOGY Most positive power supply potential. Most negative power supply potential in dual supplies. In single supply applications, it may be connected to GND. VL GND Logic power supply 5 V . Ground 0 V reference. Source terminal. May be an input or output. Drain terminal. May be an input or output. Logic control input. Ohmic resistance between D and S. RON vs. VD VS The variation in RON due to a change in the ana- log input voltage with a constant load current. RON Drift RON Match IS OFF ID OFF ID, IS ON VD VS Change in RON vs. temperature. Difference between the RON of any two switches. Source leakage current with the switch “OFF.” Drain leakage current with the switch “OFF.” Channel leakage current with the switch “ON.” Analog voltage on terminals D, S. CS OFF CD OFF CD, CS ON CIN tON tOFF Crosstalk Off Isolation Charge Injection “OFF” switch source capacitance. “OFF” switch drain capacitance. “ON” switch capacitance. Input Capacitance to ground of a digital input. Delay between applying the digital control input and the output switching on. Delay between applying the digital control input and the output switching off. “OFF” time or “ON” time measured between the 90% points of both switches, when switching from one address state to another. A measure of unwanted signal which is coupled through from one channel to another as a result of parasitic capacitance. A measure of unwanted signal coupling through an “OFF” switch. A measure of the glitch impulse transferred from the digital input to the analog output during switching. Typical Performance VDD = +5V VSS = 30 VDD = +10V VSS = 20 TA = VL = 5V VDD = +12V VSS = 40 VDD = 5V VSS = 0V TA = VL = 5V Changes to Ordering Guide 4 16-Lead Cerdip deleted from Outline Dimensions 8

PDF Datasheet Preview

LC2MOS Precision Quad SPST Switches

ADG431/ADG432/ADG433

FEATURES 44 V Supply Maximum Ratings V Analog Signal Range Low On Resistance <24 Ultralow Power Dissipation Low Leakage nA Fast Switching Times
tON <165 ns tOFF <130 ns Break-Before-Make Switching Action TTL/CMOS Compatible Plug-in Replacement for DG411/DG412/DG413

APPLICATIONS Audio and Video Switching Automatic Test Equipment Precision Data Acquisition Battery Powered Systems Sample Hold Systems Communication Systems

GENERAL DESCRIPTION The ADG431, ADG432 and ADG433 are monolithic CMOS devices comprising four independently selectable switches. They are designed on an enhanced LC2MOS process which provides low power dissipation yet gives high switching speed and low on resistance.

The on resistance profile is very flat over the full analog input range ensuring excellent linearity and low distortion when switching audio signals. Fast switching speed coupled with high signal bandwidth also make the parts suitable for video signal switching. CMOS construction ensures ultralow power dissipation making the parts ideally suited for portable and battery powered instruments.

The ADG431, ADG432 and ADG433 contain four independent SPST switches. The ADG431 and ADG432 differ only in that the digital control logic is inverted. The ADG431 switches are turned on with a logic low on the appropriate control input, while a logic high is required for the ADG432. The ADG433 has two switches with digital control logic similar to that of the ADG431 while the logic is inverted on the other two switches.

Each switch conducts equally well in both directions when ON and has an input signal range which extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked. All switches exhibit break before make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

FUNCTIONAL BLOCK DIAGRAMS

ADG431

ADG432

S2 IN2

ADG433

D3 S4 IN4

SWITCHES SHOWN FOR A LOGIC "1" INPUT

PRODUCT HIGHLIGHTS Extended Signal Range

The ADG431, ADG432 and ADG433 are fabricated on an enhanced LC2MOS process giving an increased signal range which extends fully to the supply rails.

Ultralow Power Dissipation

Low RON

Break-Before-Make Switching This prevents channel shorting when the switches are configured as a multiplexer.

Single Supply Operation For applications where the analog signal is unipolar, the ADG431, ADG432, and ADG433 can be operated from a single rail power supply. The parts are fully specified with a single 12 V power supply and will remain functional with single supplies as low as 5 V.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel 781/329-4700

World Wide Web Site:

Fax 781/326-8703

Analog Devices, Inc., 2001

Dual Supply VDD = +15 V 10%, VSS = V 10%, VL = +5 V 10%, GND = O V, unless otherwise noted.

Parameter ANALOG SWITCH

Analog Signal Range RON

RON vs. VD VS RON Drift RON Match LEAKAGE CURRENTS Source OFF Leakage IS OFF

Drain OFF Leakage ID OFF

Channel ON Leakage ID, IS ON

DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current IINL or IINH

CIN Digital Input Capacitance DYNAMIC CHARACTERISTICS1
tOFF

Break-Before-Make Time Delay, tD ADG433 Only

B Version

VDD to VSS 17
90 165
ORDERING GUIDE

Model

Temperature Range

Package Option1

ADG431BN ADG431BR ADG431ABR

ADG432BN ADG432BR ADG432ABR

ADG433BN ADG433BR ADG433ABR
to +85°C to +85°C to +85°C
to +85°C to +85°C to +85°C
to +85°C to +85°C to +85°C

N-16 R-16A R-16A2

N-16 R-16A R-16A2

N-16 R-16A R-16A2

NOTES 1N = Plastic DIP R = Small Outline IC SOIC . 2Trench isolated, latch-up proof parts. See Trench Isolation section.

TERMINOLOGY

Most positive power supply potential.

Most negative power supply potential in dual
supplies. In single supply applications, it may be
connected to GND.

VL GND

Logic power supply 5 V . Ground 0 V reference.

Source terminal. May be an input or output.

Drain terminal. May be an input or output.

Logic control input.

Ohmic resistance between D and S.

RON vs. VD VS The variation in RON due to a change in the ana-
log input voltage with a constant load current.

RON Drift RON Match IS OFF ID OFF ID, IS ON VD VS

Change in RON vs. temperature. Difference between the RON of any two switches. Source leakage current with the switch “OFF.” Drain leakage current with the switch “OFF.” Channel leakage current with the switch “ON.” Analog voltage on terminals D, S.

CS OFF CD OFF CD, CS ON CIN tON
tOFF

Crosstalk

Off Isolation

Charge Injection
“OFF” switch source capacitance. “OFF” switch drain capacitance. “ON” switch capacitance. Input Capacitance to ground of a digital input. Delay between applying the digital control input and the output switching on. Delay between applying the digital control input and the output switching off. “OFF” time or “ON” time measured between the 90% points of both switches, when switching from one address state to another. A measure of unwanted signal which is coupled through from one channel to another as a result of parasitic capacitance. A measure of unwanted signal coupling through an “OFF” switch. A measure of the glitch impulse transferred from the digital input to the analog output during switching.

Typical Performance

VDD = +5V VSS = 30 VDD = +10V VSS = 20

TA = VL = 5V

VDD = +12V VSS =
40 VDD = 5V VSS = 0V

TA = VL = 5V
Changes to Ordering Guide 4
16-Lead Cerdip deleted from Outline Dimensions 8

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADG432BNZ Datasheet file may be downloaded here without warranties.

Datasheet ID: ADG432BNZ 517813