AD7538JR-REEL

AD7538JR-REEL Datasheet


AD7538

Part Datasheet
AD7538JR-REEL AD7538JR-REEL AD7538JR-REEL (pdf)
Related Parts Information
AD7538KR-REEL AD7538KR-REEL AD7538KR-REEL
PDF Datasheet Preview
LC2MOS Microprocessor-Compatible 14-Bit DAC

AD7538

All grades 14-bit monotonic over the full temperature range Low cost, 14-bit upgrade for 12-bit systems 14-bit parallel load with double buffered inputs Small 24-pin, DIP and SOIC Low output leakage <20 nA over the full temperature range

Microprocessor-based control systems Digital audio Precision servo control and measurement in high temperature environments

FUNCTIONAL BLOCK DIAGRAM

VDD 23

AD7538
2 RFB

VREF 1
14-BIT DAC
3 IOUT
4 AGND

DAC REGISTER
20 LDAC

INPUT REGISTER

DB13 TO DB0
5 DGND

Figure
21 CS
22 WR 24 VSS
01139-001

The AD7538 is a 14-bit monolithic CMOS digital-to-analog converter DAC that uses laser trimmed thin-film resistors to achieve excellent linearity.

The DAC is loaded by a single 14-bit wide word using standard chip select and memory write logic. Double buffering, which is optional using LDAC, allows simultaneous updates in a system containing multiple AD7538s.

A novel low leakage configuration enables the AD7538 to exhibit excellent output leakage current characteristics over the specified temperature range.

The AD7538 is manufactured using the linear-compatible CMOS LC2MOS process. It is speed compatible with most microprocessors and accepts TTL or CMOS logic level inputs.

PRODUCT HIGHLIGHTS

Guaranteed Monotonicity. The AD7538 is guaranteed monotonic to 14-bits over the full temperature range for all grades.

Low Cost. The AD7538, with its 14-bit dynamic range, affords a low cost solution for 12-bit system upgrades.

Small Package Size. The AD7538 is packaged in a small 24-pin, DIP and a 24-pin SOIC.

Low Output Leakage. By tying VSS Pin 24 to a negative voltage, it is possible to achieve a low output leakage current at high temperatures.

Wide Power Supply Tolerance. The device operates on a +12 V to +15 V VDD, with a ±5% tolerance on this nominal figure. All specifications are guaranteed over this range.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel:

Fax:
2009 Analog Devices, Inc. All rights reserved.

AD7538* Product Page Quick Links

Last Content Update 08/30/2016

Comparable Parts

View a parametric search of comparable parts

Documentation
Equivalent Circuit Analysis 10 Digital Section 10 Unipolar Binary Operation 2-Quadrant Multiplication 10 Bipolar Operation 4-Quadrant Multiplication .................... 11 Low Leakage 11 Programmable Gain 12 Application Hints 13 Output Offset 13 General Ground 13 Microprocessor 13 AD7538-to-8086 Interface 13 AD7538-to-MC68000 Interface 13 Digital Feedthrough 14 Outline Dimensions 15 Ordering Guide 16

AD7538

SPECIFICATIONS

VDD = V to V1, VREF = 10 V VPIN3 = VPIN4 = 0 V, VSS = −300 mV all specifications TMIN to TMAX, unless otherwise noted.

Table

Parameter2 ACCURACY

Resolution Relative Accuracy

Differential Nonlinearity Full-Scale Error
+25°C TMIN to TMAX Gain Temperature Coefficient3 Output Leakage Current IOUT Pin 3 25°C TMIN to TMAX TMIN to TMAX REFERENCE INPUT Resistance Pin 1

DIGITAL INPUTS VIH Input High Voltage VIL Input Low Voltage IIN Input Current 25°C TMIN to TMAX CIN Input Capacitance 3

POWER SUPPLY VDD Range

VSS Range

A, J Versions

B, K Versions

S Version
±10
±10
±10
±20
±25
±25
±150
±10
±10
±10
−200/−500 −200/−500 −200/−500

T Version Unit

Test Conditions/Comments

Bits

LSB max

All grades guaranteed
monotonic

LSB max

Over temperature

Measured using internal RFB DAC

LSB max

Registers loaded with all 1s

LSB max
ppm/°C typ
±5 ±20 ±150
nA max nA max nA max
ORDERING GUIDE

Model

Temperature Range

AD7538JN
0°C to +70°C

AD7538JNZ1
0°C to +70°C

AD7538KN
0°C to +70°C

AD7538KNZ1
0°C to +70°C

AD7538JR
0°C to +70°C

AD7538JR-REEL
0°C to +70°C

AD7538JRZ1
0°C to +70°C

AD7538JRZ-REEL1 0°C to +70°C

AD7538KR
0°C to +70°C

AD7538KR-REEL
0°C to +70°C

AD7538KRZ1
0°C to +70°C

AD7538KRZ-REEL1 0°C to +70°C

AD7538AQ
−25°C to +85°C

AD7538BQ
−25°C to +85°C

AD7538SQ
−55°C to +125°C

AD7538TQ
−55°C to +125°C
1 Z = RoHS Compliant Part.

Relative Accuracy ±2 LSB ±2 LSB ±1 LSB ±1 LSB ±2 LSB ±2 LSB ±2 LSB ±2 LSB ±1 LSB ±1 LSB ±1 LSB ±1 LSB ±2 LSB ±1 LSB ±2 LSB ±1 LSB

Full-Scale Error ±8 LSB ±8 LSB ±5 LSB ±5 LSB ±8 LSB ±8 LSB ±8 LSB ±8 LSB ±5 LSB ±5 LSB ±5 LSB ±5 LSB ±8 LSB ±5 LSB ±10 LSB ±6 LSB

Package Description 24-Lead PDIP 24-Lead PDIP 24-Lead PDIP 24-Lead PDIP 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead SOIC_W 24-Lead CERDIP 24-Lead CERDIP 24-Lead CERDIP 24-Lead CERDIP

Package Option N-24-1 N-24-1 N-24-1 N-24-1 RW-24 RW-24 RW-24 RW-24 RW-24 RW-24 RW-24 RW-24 Q-24-1 Q-24-1 Q-24-1 Q-24-1
2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.

D01139-0-1/09 B
More datasheets: AGQ300-48S1V2P-4L | AGQ300-48S1V2PB-4L | DFR0469 | DZN-2R5D704G4T | DZN-2R7D105G5T | DZN-2R7D335Z6T | DZN-2R7D475Z7T | DZN-2R7D106K8T | 240-021-6 | JA01J12AQ


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AD7538JR-REEL Datasheet file may be downloaded here without warranties.

Datasheet ID: AD7538JR-REEL 517733