3B47-CUSTOM

3B47-CUSTOM Datasheet

Interfaces, amplifies, filters, isolates, & linearizes analog input voltages from a J, K, T, E, R, S or B-type thermocouple input signal is internally linearized High accuracy internal cold junction compensation. Module provides +1500 V peak of galvanic transformerbased isolation with a common mode rejection CMR of 160 dB 50/60 Hz and a normal mode rejection NMR of 60 dB 50/60 Hz. All 3B47 series modules are mix-and-match and Hot Swappable.

Part	Datasheet
3B47-CUSTOM	3B47-CUSTOM (pdf)

PDF Datasheet Preview
Isolated, Linearized, Thermocouple Input Interfaces, amplifies, filters, isolates, & linearizes analog input voltages from a J, K, T, E, R, S or B-type thermocouple input signal is internally linearized High accuracy internal cold junction compensation. Module provides +1500 V peak of galvanic transformerbased isolation with a common mode rejection CMR of 160 dB 50/60 Hz and a normal mode rejection NMR of 60 dB 50/60 Hz. All 3B47 series modules are mix-and-match and Hot Swappable. Industrial signal conditioning Industrial signal isolation Industrial signal filtering PRODUCT OVERVIEW The 3B Series of Signal Conditioning I/o Subsystems provide a low-cost, versatile method of transferring analog transducer signals to a data acquisition, monitoring or control system without the inherent noise, non-linearity, drift and extraneous voltages. The modules are designed to directly accept analog signals from Thermocouples, RTD’s, AC and DC Strain Gages, Torque Transducers, Frequency Transducers, LVDTs, millivolt or process current signals. The modules amplify, isolate, linearize and convert the transducer output signals to standardized analog inputs for high-level analog I/O subsystems. The 3B Series Subsystem consists of a 10” relay rack with universal mounting backplane and a family of plug-in up to 16 per rack input and output signal conditioning modules. Eight and four channel backplanes are also available. Each backplane incorporates screw terminals for sensor inputs and current outputs and a 26-pin connector for high-level singleended voltage outputs to the user’s equipment. The input modules feature complete signal conditioning circuitry optimized for specific sensors or analog signals and provide two simultaneous high-level analog outputs 0 to +10V or +10V and 4-20 mA or 0-20 mA . Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies. 3B47 FUNCTIONAL BLOCK DIAGRAM Figure 3B47 Functional Block Diagram Output modules accept 0 to +10V or +10V single-ended signals and provide an isolated 4-20 mA or 0-20 mA process signal. All modules feature a universal pin-out and may be readily hot-swapped under full power and interchanged without disrupting field wiring. The Analog Devices 3B Series Signal Conditioning Subsystem is designed to easily handle signal conditioning problems in measurement and control applications. Some typical uses are in microcomputer-based data acquisition systems, programmable controllers, analog recorders, dedicated control systems, and any other applications where monitoring of temperature, pressure, flow and analog signals are required. Since each input module features two simultaneous outputs, the voltage output can be used to provide an input to a microprocessor-based data acquisition or control system while the current output can be used for analog transmission, operator interface, or an analog backup system. Each input module is a single-channel signal conditioner which plugs into a socket on the backplane and accepts its signal from the input screw terminals. All input modules provide input protection, amplification and filtering of the input signal, accuracy of low drift of +1 uV/ oC low-level input modules , and feature two high-level analog outputs that are compatible with most process instrumentation. The isolated input modules also provide +1500 V peak isolation. The choice of a specific 3B module depends upon the type of input signal. Input modules are available to accept millivolt, volt, process current, thermocouple, RTD, AC and DC strain gage, frequency and LVDT inputs. The voltage output of each module is available from the system I/O connector while the current output is available on the output screw terminals. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: Fax 2004 Analog Devices, Inc. All rights reserved. The 3B47 is a single-channel isolated thermocouple signalconditioning module which interfaces, amplifies, isolates, protects, linearizes and filters analog input voltages from a J, K, T, E, R, S or B-type thermocouple. The thermocouple input signal is internally linearized to provide an output voltage which is linear with temperature, High accuracy internal cold junction compensation and a predictable upscale open circuit indication provide a complete signal conditioning solution. To accurately measure low level signals in electrically noisy environments, +1500 V peak of galvanic transformer-based isolation with a common mode rejection CMR of 160 dB 50/60 Hz and a normal mode rejection NMR of 60 dB 50/60 Hz are provided. This plug-in, mix-and-match, hot-swappable module is easily field calibrated via front-panel zero and span adjustments. A chopper-stabilized low-drift input amplifier assures stable long-term stability. At the amplifier input, a zero-scale input voltage is subtracted from the input signal to set the zero-scale value. For user convenience, the zero and span optionally can be factory configured to meet custom needs Model 3B37- 3B47 CUSTOM . Zero suppression can exceed 100% of the input range. This enables suppression of a zero-scale input value many times larger than the total span for precise expandedscale measurements of a selection portion of an input signal. The differential input circuit on the field side is fully floating, eliminating the need for any input grounding. Signal isolation by transformer coupling uses a proprietary modulation technique for linear, stable and reliable performance. A demodulator on the computer side of the signal transformer recovers the original signal which is then filtered and buffered to provide a low-noise, low-impedance output voltage. Internal cold-junction compensation largely corrects errors arising from parasitic thermocouples formed by thermocouple connection to the input screw terminals, providing an accuracy of +0.5oC over the +5oC to +45oC ambient temperature range. The module generates a predictable upscale signal to indicate an open thermocouple for a downscale response, connect a 47 Watt resistor across screw terminals 2 and 4 on the 3B Series backplane. Figure 2 3B47 Models Available Model Input Type Input Range Output Range 3B47-J-01 Type J 0°C to +760°C 32°F to +1400°F 0 V to +10 V 3B47-J-02 Type J -100°C to +300°C -148°F to +572°F 0 V to +10 V 3B47-J-03 Type J 0°C to +500°C +32°F to +932°F 0 V to +10 V

PDF Datasheet Preview

Isolated, Linearized, Thermocouple Input

Interfaces, amplifies, filters, isolates, & linearizes analog input voltages from a J, K, T, E, R, S or B-type thermocouple input signal is internally linearized High accuracy internal cold junction compensation. Module provides +1500 V peak of galvanic transformerbased isolation with a common mode rejection CMR of 160 dB 50/60 Hz and a normal mode rejection NMR of 60 dB 50/60 Hz. All 3B47 series modules are mix-and-match and Hot Swappable.

Industrial signal conditioning Industrial signal isolation Industrial signal filtering

PRODUCT OVERVIEW

The 3B Series of Signal Conditioning I/o Subsystems provide a low-cost, versatile method of transferring analog transducer signals to a data acquisition, monitoring or control system without the inherent noise, non-linearity, drift and extraneous voltages. The modules are designed to directly accept analog signals from Thermocouples, RTD’s, AC and DC Strain Gages, Torque Transducers, Frequency Transducers, LVDTs, millivolt or process current signals. The modules amplify, isolate, linearize and convert the transducer output signals to standardized analog inputs for high-level analog I/O subsystems. The 3B Series Subsystem consists of a 10” relay rack with universal mounting backplane and a family of plug-in up to 16 per rack input and output signal conditioning modules.

Eight and four channel backplanes are also available. Each backplane incorporates screw terminals for sensor inputs and current outputs and a 26-pin connector for high-level singleended voltage outputs to the user’s equipment.

The input modules feature complete signal conditioning circuitry optimized for specific sensors or analog signals and provide two simultaneous high-level analog outputs 0 to +10V or +10V and 4-20 mA or 0-20 mA .

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies.
3B47

FUNCTIONAL BLOCK DIAGRAM

Figure 3B47 Functional Block Diagram

Output modules accept 0 to +10V or +10V single-ended signals and provide an isolated 4-20 mA or 0-20 mA process signal. All modules feature a universal pin-out and may be readily hot-swapped under full power and interchanged without disrupting field wiring.

The Analog Devices 3B Series Signal Conditioning Subsystem is designed to easily handle signal conditioning problems in measurement and control applications. Some typical uses are in microcomputer-based data acquisition systems, programmable controllers, analog recorders, dedicated control systems, and any other applications where monitoring of temperature, pressure, flow and analog signals are required. Since each input module features two simultaneous outputs, the voltage output can be used to provide an input to a microprocessor-based data acquisition or control system while the current output can be used for analog transmission, operator interface, or an analog backup system.

Each input module is a single-channel signal conditioner which plugs into a socket on the backplane and accepts its signal from the input screw terminals. All input modules provide input protection, amplification and filtering of the input signal, accuracy of low drift of +1 uV/ oC low-level input modules , and feature two high-level analog outputs that are compatible with most process instrumentation. The isolated input modules also provide +1500 V peak isolation.

The choice of a specific 3B module depends upon the type of input signal. Input modules are available to accept millivolt, volt, process current, thermocouple, RTD, AC and DC strain gage, frequency and LVDT inputs. The voltage output of each module is available from the system I/O connector while the current output is available on the output screw terminals.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel:

Fax 2004 Analog Devices, Inc. All rights reserved.

The 3B47 is a single-channel isolated thermocouple signalconditioning module which interfaces, amplifies, isolates, protects, linearizes and filters analog input voltages from a J, K, T, E, R, S or B-type thermocouple. The thermocouple input signal is internally linearized to provide an output voltage which is linear with temperature, High accuracy internal cold junction compensation and a predictable upscale open circuit indication provide a complete signal conditioning solution. To accurately measure low level signals in electrically noisy environments, +1500 V peak of galvanic transformer-based isolation with a common mode rejection CMR of 160 dB 50/60 Hz and a normal mode rejection NMR of 60 dB 50/60 Hz are provided. This plug-in, mix-and-match, hot-swappable module is easily field calibrated via front-panel zero and span adjustments.

A chopper-stabilized low-drift input amplifier assures stable long-term stability. At the amplifier input, a zero-scale input voltage is subtracted from the input signal to set the zero-scale value. For user convenience, the zero and span optionally can be factory configured to meet custom needs Model 3B37-
3B47

CUSTOM . Zero suppression can exceed 100% of the input range. This enables suppression of a zero-scale input value many times larger than the total span for precise expandedscale measurements of a selection portion of an input signal. The differential input circuit on the field side is fully floating, eliminating the need for any input grounding. Signal isolation by transformer coupling uses a proprietary modulation technique for linear, stable and reliable performance. A demodulator on the computer side of the signal transformer recovers the original signal which is then filtered and buffered to provide a low-noise, low-impedance output voltage.

Internal cold-junction compensation largely corrects errors arising from parasitic thermocouples formed by thermocouple connection to the input screw terminals, providing an accuracy of +0.5oC over the +5oC to +45oC ambient temperature range. The module generates a predictable upscale signal to indicate an open thermocouple for a downscale response, connect a 47 Watt resistor across screw terminals 2 and 4 on the 3B Series backplane.

Figure 2
3B47 Models Available

Model

Input Type

Input Range

Output Range
3B47-J-01

Type J
0°C to +760°C 32°F to +1400°F
0 V to +10 V
3B47-J-02

Type J
-100°C to +300°C -148°F to +572°F
0 V to +10 V
3B47-J-03

Type J
0°C to +500°C +32°F to +932°F
0 V to +10 V

More datasheets: PX0714/4/15/28 | PX0714/2/15/28 | FQI2N80TU | FQB2N80TM | AFCT-701SDZ | 3102 | AS8650A-ZQFP-01 | 81519335 | 81519635 | 81519035

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3B47-CUSTOM Datasheet file may be downloaded here without warranties.

Datasheet ID: 3B47-CUSTOM 517683