TSL2562FN

TSL2562FN Datasheet


D 16-Bit Digital Output with SMBus TSL2562

Part Datasheet
TSL2562FN TSL2562FN TSL2562FN (pdf)
Related Parts Information
TSL2563T TSL2563T TSL2563T
TSL2563CL TSL2563CL TSL2563CL
TSL2562T TSL2562T TSL2562T
TSL2562CL TSL2562CL TSL2562CL
TSL2562CS TSL2562CS TSL2562CS
TSL2563CS TSL2563CS TSL2563CS
TSL2563FN TSL2563FN TSL2563FN
PDF Datasheet Preview
D Approximates Human Eye Response

D Programmable Interrupt Function with

User-Defined Upper and Lower Threshold Settings

D 16-Bit Digital Output with SMBus TSL2562
at 100 kHz or I2C TSL2563 Fast-Mode at 400 kHz

D Programmable Analog Gain and Integration

Time Supporting 1,000,000-to-1 Dynamic Range

D Automatically Rejects 50/60-Hz Lighting

Ripple

D Low 2.5-V Input Voltage and 1.8-V Digital

Output

D Low Active Power mW Typical with

Power Down Mode

D RoHS Compliant

TSL2562, TSL2563 LOW-VOLTAGE

LIGHT-TO-DIGITAL CONVERTER TAOS066N − AUGUST 2010

PACKAGE CS 6-LEAD CHIPSCALE

TOP VIEW

VDD 1 ADDR SEL 2

GND 3
6 SDA 5 INT 4 SCL

VDD 1 ADDR SEL 2

GND 3

PACKAGE T 6-LEAD TMB TOP VIEW
6 SDA 5 INT 4 SCL

The TSL2562 and TSL2563 are low-voltage light-to-digital converters that transform light intensity to a digital signal output capable of direct I2C TSL2563 or SMBus TSL2562 interface. Each device combines one broadband photodiode visible plus infrared and one infrared-responding photodiode on a single CMOS integrated circuit capable of providing a near-photopic response over an effective 20-bit dynamic range 16-bit resolution . Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance ambient light level in lux is derived using an empirical formula to approximate the human eye response. The TSL2562 device permits an SMB-Alert style interrupt, and the TSL2563 device supports a traditional level style interrupt that remains asserted until the firmware clears it.

PACKAGE FN DUAL FLAT NO-LEAD

TOP VIEW

VDD 1 ADDR SEL 2

GND 3
6 SDA 5 INT 4 SCL

SDA 5

PACKAGE CL 6-LEAD ChipLED

TOP VIEW
4 SCL

INT 6
3 ADDR SEL

VDD 1
2 GND

Package Drawings are Not to Scale

While useful for general purpose light sensing applications, the TSL2562/63 devices are designed particularly for display panels LCD, OLED, etc. with the purpose of extending battery life and providing optimum viewing in diverse lighting conditions. Display panel backlighting, which can account for up to 30 to 40 percent of total platform power, can be automatically managed. Both devices are also ideal for controlling keyboard illumination based upon ambient lighting conditions. Illuminance information can further be used to manage exposure control in digital cameras. The TSL2562/63 devices are ideal in notebook/tablet PCs, LCD monitors, flat-panel televisions, cell phones, and digital cameras. In addition, other applications include street light control, security lighting, sunlight harvesting, machine vision, and automotive instrumentation clusters.
ORDERING NUMBER TSL2562CS TSL2562T TSL2562FN TSL2562CL TSL2563CS TSL2563T TSL2563FN TSL2563CL

Copyright E 2010, TAOS Inc. 2

The LUMENOLOGY r Company r

Terminal Functions

TERMINAL

NAME

CS, T, FN PKG NO.

ADDR SEL

CL PKG NO.
3 2 6 4 5 1

TSL2562, TSL2563 LOW-VOLTAGE

LIGHT-TO-DIGITAL CONVERTER TAOS066N − AUGUST 2010

TYPE

SMBus device select three-state

Power supply ground. All voltages are referenced to GND.

Level or SMB Alert interrupt open drain.

SMBus serial clock input terminal clock signal for SMBus serial data.

SMBus serial data I/O terminal serial data I/O for SMBus.

Supply voltage.

Absolute Maximum Ratings over operating free-air temperature range unless otherwise noted †

Supply voltage, VDD see Note 1 V Digital output voltage range, VO V to V Digital output current, IO −1 mA to 20 mA Storage temperature range, Tstg −40°C to 85°C ESD tolerance, human body model 2000 V
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1 All voltages are with respect to GND.

Recommended Operating Conditions

Supply voltage, VDD Operating free-air temperature, TA SCL, SDA input low voltage, VIL SCL, SDA input high voltage, VIH

VDD 3

MIN NOM −30

MAX 3

UNIT V °C V

Electrical Characteristics over recommended operating free-air temperature range unless otherwise noted

PARAMETER IDD Supply current

VOL INT, SDA output low voltage I LEAK Leakage current

TEST CONDITIONS Active Power down 3 mA sink current 6 mA sink current

MIN TYP MAX UNIT
15 uA
−5

The LUMENOLOGY r Company

Copyright E 2010, TAOS Inc. 3

TSL2562, TSL2563 LOW-VOLTAGE LIGHT-TO-DIGITAL CONVERTER

TAOS066N − AUGUST 2010

Operating Characteristics, High Gain VDD = V, TA = 255C, unless otherwise noted see Notes 2, 3, 4, 5
More datasheets: K5V1RD43G | K5V1BU23G | K5V1BU43G | K5V1GN43G | K5V1WH43G | K5V1WS43G | 1392 | TSL2563T | TSL2563CL | TSL2562T


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSL2562FN Datasheet file may be downloaded here without warranties.

Datasheet ID: TSL2562FN 519837