TSL230RD, TSL230ARD, TSL230BRD
Part | Datasheet |
---|---|
![]() |
TSL230BRD-TR (pdf) |
Related Parts | Information |
---|---|
![]() |
TSL230RD-TR |
![]() |
TSL230ARD-TR |
PDF Datasheet Preview |
---|
TSL230RD, TSL230ARD, TSL230BRD PROGRAMMABLE LIGHT-TO-FREQUENCY CONVERTERS r TAOS054P − OCTOBER 2007 D High-Resolution Conversion of Light Intensity to Frequency With No External Components D Programmable Sensitivity and Full-Scale Output Frequency D Communicates Directly With a Microcontroller D High Irradiance Responsivity 790 Hz/ mW/cm2 Typical at 640 nm D Single-Supply Operation V to V D Power-Down Feature 5 mA Typical D Nonlinearity Error Typically at 100 kHz D Stable 200 ppm/°C Temperature Coefficient D Low-Profile Lead Pb Free and RoHS Compliant Surface-Mount Package S0 1 S1 2 OE 3 GND 4 PACKAGE D 8-LEAD SOIC TOP VIEW 8 S3 7 S2 6 OUT 5 VDD The TSL230RD, TSL230ARD, and TSL230BRD programmable light-to-frequency converters combine a configurable silicon photodiode and a current-to-frequency converter on single monolithic CMOS integrated circuit. The output can be either a pulse train or a square wave 50% duty cycle with frequency directly proportional to light intensity. Device sensitivity is selectable in three ranges, providing two decades of adjustment. The full-scale output frequency can be scaled by one of four preset values. All inputs and the output are TTL compatible, allowing direct two-way communication with a microcontroller for programming and output interface. The output enable OE places the output in the high-impedance state for multiple-unit sharing of a microcontroller input line. The devices are available with absolute output frequency tolerances of ±10% TSL230BRD , ±15% TSL230ARD , and ±20% TSL230RD . They have been temperature compensated for the ultraviolet-to-visible light range of 320 nm to 700 nm and respond over the light range of 320 nm to 1050 nm. The devices are characterized over the temperature range of −25°C to 70°C. Functional Block Diagram Light Photodiode Array S0 S1 Current-to-Frequency Converter Output OE S2 S3 The LUMENOLOGY r Company Texas Advanced Optoelectronic Solutions Inc. 1001 Klein Road S Suite 300 S Plano, TX 75074 S 972r 673-0759 Copyright E 2007, TAOS Inc. 1 TSL230RD, TSL230ARD, TSL230BRD PROGRAMMABLE LIGHT-TO-FREQUENCY CONVERTERS TAOS054P − OCTOBER 2007 Terminal Functions TERMINAL NAME NO. S0, S1 1, 2 S2, S3 7, 8 TYPE Ground I Enable for fO active low O Scaled-frequency fO output I Sensitivity-select inputs I fO scaling-select inputs Supply voltage Selectable Options S0 SENSITIVITY Power down 100x ORDERING NUMBER TSL230RD TSL230ARD TSL230BRD Absolute Maximum Ratings over operating free-air temperature range unless otherwise noted † Supply voltage, VDD see Note 1 6 V Input voltage range, all inputs, VI V to VDD + V Operating free-air temperature range, TA −40°C to 85°C Storage temperature range −40°C to 85°C Solder conditions in accordance with JEDEC J−STD−020A, maximum temperature see Note 2 260°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES All voltage values are with respect to GND. The device may be hand soldered provided that heat is applied only to the solder pad and no contact is made between the tip of the solder iron and the device lead. The maximum time heat should be applied to the device is 5 seconds. Recommended Operating Conditions Supply voltage, VDD High-level input voltage, VIH Low-level input voltage, VIL Operating free-air temperature range, TA VDD = V to V VDD = V to V Copyright E 2007, TAOS Inc. MIN NOM − 25 MAX VDD 70 UNIT V °C The LUMENOLOGY r Company TSL230RD, TSL230ARD, TSL230BRD PROGRAMMABLE LIGHT-TO-FREQUENCY CONVERTERS TAOS054P − OCTOBER 2007 Electrical Characteristics at TA = 25°C, VDD = 5 V unless otherwise noted PARAMETER TEST CONDITIONS MIN TYP MAX UNIT High-level output voltage Low-level output voltage High-level input current Low-level input current Supply current IOH = − 4 mA IOL = 4 mA Power-on mode Power-down mode 5 uA 5 uA 3 mA 12 uA F.S. Full-scale frequency See Note 3 S0=S1=H, S2=S3=L Temperature coefficient of output frequency λ 700 nm See Note 4 ± 200 ppm/°C kSVS NOTES: Supply voltage sensitivity VDD = 5 V ±10% Full-scale frequency is the maximum operating frequency of the device without saturation. The temperature coefficient of output frequency is measured with constant irradiance as the temperature is varied between −25°C and 70°C. The constant irradiance is sufficiently high that the output frequency is much greater than the dark frequency over the entire temperature range. |
More datasheets: ASMT-MY06-NKM00 | ASMT-MW06-NLMZ1 | ASMT-MW06-NLM00 | ASMT-MW05-NLMS0 | ASMT-MW05-NLMW0 | ASMT-MW05-NLMZ0 | ASMT-MW05-NLM00 | 2336 | TSL230RD-TR | TSL230ARD-TR |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSL230BRD-TR Datasheet file may be downloaded here without warranties.