AS1375-BTDT-12

AS1375-BTDT-12 Datasheet


AS1375

Part Datasheet
AS1375-BTDT-12 AS1375-BTDT-12 AS1375-BTDT-12 (pdf)
Related Parts Information
AS1375 AS1375 AS1375
AS1375-BTDT-27 AS1375-BTDT-27 AS1375-BTDT-27
AS1375-BTDT-25 AS1375-BTDT-25 AS1375-BTDT-25
AS1375-BTDT-30 AS1375-BTDT-30 AS1375-BTDT-30
AS1375-BTDT-33 AS1375-BTDT-33 AS1375-BTDT-33
AS1375-BTDT-18 AS1375-BTDT-18 AS1375-BTDT-18
PDF Datasheet Preview
Datasheet

AS1375
1µA Quiescent Current, 200mA LDO
1 General Description

The AS1375 low-power, positive voltage regulator is designed to deliver up to 200mA, while consuming only 1µA typ. of quiescent current. The device is available in fixed output voltages between 1.2V and 5.0V programmable in 50mV steps . The input voltage ranges from 2V to 5.5V. Operation with large input to output differential voltages is limited by the maximum power dissipation available from package and environment.

The very-low dropout voltage prolongs battery life and allows high current in small applications when operated with minimum input-to-output voltage differentials. The device features very stable output voltage, strict output voltage regulation tolerances ±1% , and excellent lineand load-regulation.

The device features integrated short-circuit and over current protection. Under-Voltage lockout prevents erratic operation when the input voltage is slowly decaying. Thermal Protection shuts down the device when die temperature reaches 160°C. This is a useful protection when the device is under sustained short circuit conditions.

The AS1375 is available in an 6-pin TDFN 2x2mm package and is qualified for -40°C to +85°C operation.
2 Key Features

Voltage 2V to 5.5V Dropout Voltage 120mV 200mA load Voltage Range 1.2V to 5.0V 50mV steps Output Current 200mA Low Quiescent Current 1µA Voltage Accuracy ±1% Shutdown Current 10nA typ. Overtemperature/Overcurrent Protection Lockout Feature Input External Components Required Temperature Range -40°C to +85°C TDFN 2x2mm Package
3 Applications

The device is perfectly suited for wireless handsets, smartphones, PDAs, MP3 players, and other batteryoperated handheld devices, where the regulators have to be always on.

Figure AS1375 - Typical Application Diagram

Input 2V to 5.5V
1µF

ON / OFF

AS1375

Output 1.2V to 5V

COUT 1µF
1 - 10

AS1375

Datasheet - Pin Assignments
4 Pin Assignments

Figure Pin Assignments Top View
6 OUT

GND 2 AS1375 5 GND
7 4 GND

Pin Descriptions

Table Pin Descriptions

Pin Name IN EN

GND OUT

Exposed Pad

Pin Number 1 3
2, 4, 5 6

Description Input Supply Enable Input. A logic low disables the regulator. Connect to pin IN for normal operation. Ground Regulated Output Voltage. Current flowing out of this pin is equivalent DC load current. Ground. This pin also functions as a heat sink. Solder to a large pad or the circuit-board ground plane to maximize power dissipation.
2 - 10

AS1375

Datasheet - Absolute Maximum Ratings
5 Absolute Maximum Ratings

Stresses beyond those listed in Table 2 may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in Section 6 Electrical Characteristics on page 4 is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Table Absolute Maximum Ratings
Datasheet - Ordering Information
11 Ordering Information

The devices are available as the standard products shown in Table
Table Ordering Information
Ordering Code Marking

AS1375-BTDT-12

AS1375-BTDT-18

AS1375-BTDT-25

AS1375-BTDT-30

AS1375-BTDT-33

Output 1.2V 1.8V 2.5V 3.0V 3.3V
1µA Quiescent Current, 200mA LDO
1µA Quiescent Current, 200mA LDO
1µA Quiescent Current, 200mA LDO
1µA Quiescent Current, 200mA LDO
1µA Quiescent Current, 200mA LDO

Delivery Form

Package

Tape and Reel 6-pin TDFN 2x2mm

Tape and Reel 6-pin TDFN 2x2mm

Tape and Reel 6-pin TDFN 2x2mm

Tape and Reel 6-pin TDFN 2x2mm

Tape and Reel 6-pin TDFN 2x2mm

Non-standard devices from 1.2V to 5.0V are available in 50mV steps. For more information and inquiries

Note All products are RoHS Buy our products or get free samples online at ICdirect:

Technical Support is found at

For further information and requests, please contact us or find your local distributor at
9 - 10

AS1375

Datasheet

Copyrights

Copyright 1997-2010, austriamicrosystems AG, Tobelbaderstrasse 30, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies.

Disclaimer

Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services.

Contact Information

Headquarters austriamicrosystems Tobelbaderstrasse A-8141 Unterpremstaetten, Austria Tel +43 0 3136 500 Fax +43 0 3136 525 01

For Sales Offices, Distributors and Representatives, please visit:
10 - 10
More datasheets: HR01400J | HR013R3K | HR01394J | HR01472J | HR01910J/8 | AS1375 | AS1375-BTDT-27 | AS1375-BTDT-25 | AS1375-BTDT-30 | AS1375-BTDT-33


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS1375-BTDT-12 Datasheet file may be downloaded here without warranties.

Datasheet ID: AS1375-BTDT-12 519627