AS1341 - Evaluation Board
Part | Datasheet |
---|---|
AS1341-TD_EK_ST | AS1341-TD_EK_ST (pdf) |
PDF Datasheet Preview |
---|
AS1341 - Evaluation Board Application Note AS1341 Evaluation Board Application Note AS1341 - Evaluation Board Application Note Board Description Figure 1 Board Description Connector Description Label A B C D E F Name VIN GND SHDNN OUT GND POK Input Voltage Ground Enable Jumper Power Output Connector Ground Power-OK Signal Info Input voltage ranging from 4.5V to 20V Jumper Description Label Name ILIM HIGH/LOW Current Limiter ON/OFF Enable Jumper 3.3V 5V Info LOW ILIMIT 0.7A HIGH ILIMIT 1.4A ON OFF Measurement Points Description Label J K L M Name LX GND VIN OUT Info External Conductor Power Supply Connectors for VBATT and Ground. Power Output Connector AS1341 - Evaluation Board Application Note Operational sequence This evaluation board comes with the AS1341. If not present get the datasheet for the AS1341 from Drive the IC on the Demoboard only with the recommended settings and values as described in the datasheet. Connect a 4.5V to 20V power supply VIN “A” and GND “B” . Perform measurements at the measurement points “J” to “K”. If there are questions do not hesitate to contact us. See contact information at the end of the application note. Optional Features Setting the output voltage |
More datasheets: AEAT-86AD-LASF0 | AEAT-86AD-LCSC0 | AEAT-86AD-LASC0 | 07-0001-31 | 50739180932600F | ATA6623-TAPY | ATA6625-TAPY 19 | ATA6625C-TAPY | ATA6623C-TAPY | ATA6625-TAQY 19 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS1341-TD_EK_ST Datasheet file may be downloaded here without warranties.