AS1321 - Evaluation Board
Part | Datasheet |
---|---|
![]() |
AS1321 DB (pdf) |
PDF Datasheet Preview |
---|
AS1321 - Evaluation Board Application Note AS1321 Evaluation Board Application Note AS1321 - Evaluation Board Application Note Board Description Figure 1 Board Description - Connector Figure 2 Board Description Measurement Points Connector Description Label Jumper Vin GND SHDNN Power Supply Connectors for Vin and Ground. Active-Low Logic Shutdown Input On / Off SHDNN Shutdown Jumper Vout Power Output Connector Active-Low Reset Output Connector Measurement Points Info +1.5V to +5.0V 1/ON = The AS1321 is on. 0/OFF = The AS1321 is off and the current into Vin is typ . Fixed Output Voltage of 5.0V Label G H I J K Jumper RN Vout LX Vin GND Active-Low Reset Output Connector Power Output Connector External Inductor Power Supply Connectors for Vin and Ground. Info Measurement Points Operational sequence If not present get the datasheet for the AS1321 from Drive the IC on the evaluation board only with the recommended settings and values as described in the datasheet. Connect a +1.5V to +5.0V power supply Vin “A” and GND “B” . Perform measurements at the measurement points. Have fun using the Demoboard. If there are questions do not hesitate to contact us. See contact information at the end of the application note. AS1321 - Evaluation Board Application Note Layout of demoboard Board schematics and layout Figure 3 Schematic Figure 4 Top View |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS1321 DB Datasheet file may be downloaded here without warranties.