8001-4103

8001-4103 Datasheet

8001-4103 SIZE CAGE CODE DWG. NO.

Part	Datasheet
8001-4103	8001-4103 (pdf)

PDF Datasheet Preview
EXPIRED PRODUCT DATA DRAWING DATE 03/05 APPROVED VMJ MATERIALS: INSULATORS PTFE PER ASTM D1710, TYPE 1, GRADE 1, CLASS B. BODY: BRASS PER ASTM B16, ALLOY UNS C36000, H02 BODY & CONTACT: BERYLLIUM COPPER PER ASTM B196, ALLOY C17300, COND. TD04 SHRINK TUBING POLYEFIN PER SAE AMS-DTL-23053/5-106-0 FINISHES: BODIES & CONTACT: GOLD PER ASTM B488, TYPE II, GRADE C, CLASS OVER NICKEL PER AMS-QQ-N-290 CLASS 1, MIN. ELECTRICAL: IMPEDANCE: 50 OHMS FREQ. RANGE DC TO 3 GHz INSUL. RES.: 5,000 MEGOHMS MIN. D.W.V: 1,000 VRMS MIN. VSWR: + X F IN GHz INSERTION LOSS X SQUARE ROOT OF F GHz MAX FREQ. CAN BE LIMITED BY CABLE MIN. MIN. MAX. MATERIAL FINISH: SEE ABOVE SEE ABOVE PROPRIETARY THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL 1/64 ANGULAR X 1 0' X' 15' DECIMAL .X .XXX INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED 1 ALL DIMENSIONS ARE AFTER PLATING. 2 BREAK CORNERS & EDGES R. MAX. 3 CHAM. 1ST & LAST THREADS. 4 SURFACE ROUGHNESS 63 MIL-STD-10. 5 DIA.’S ON COMMON CENTERS TO BE CONCENTRIC

PDF Datasheet Preview

EXPIRED PRODUCT DATA DRAWING

DATE 03/05

APPROVED VMJ

MATERIALS:

INSULATORS PTFE PER ASTM D1710, TYPE 1, GRADE 1, CLASS B.

BODY:

BRASS PER ASTM B16, ALLOY UNS C36000, H02

BODY & CONTACT:

BERYLLIUM COPPER PER ASTM B196, ALLOY C17300, COND. TD04

SHRINK TUBING POLYEFIN PER SAE AMS-DTL-23053/5-106-0

FINISHES:

BODIES & CONTACT:

GOLD PER ASTM B488, TYPE II, GRADE C, CLASS OVER NICKEL PER AMS-QQ-N-290 CLASS 1, MIN.

ELECTRICAL:

IMPEDANCE:
50 OHMS

FREQ. RANGE DC TO 3 GHz

INSUL. RES.:
5,000 MEGOHMS MIN.

D.W.V:
1,000 VRMS MIN.

VSWR:
+ X F IN GHz

INSERTION LOSS X SQUARE ROOT OF F GHz

MAX FREQ. CAN BE LIMITED BY CABLE

MIN.

MIN.

MAX.

MATERIAL FINISH:

SEE ABOVE SEE ABOVE

PROPRIETARY

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED.

DIMENSIONS ARE IN INCHES TOLERANCES:

FRACTIONAL 1/64 ANGULAR X 1 0'

X' 15'

DECIMAL .X
.XXX

INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED
1 ALL DIMENSIONS ARE AFTER PLATING. 2 BREAK CORNERS & EDGES R. MAX. 3 CHAM. 1ST & LAST THREADS. 4 SURFACE ROUGHNESS 63 MIL-STD-10. 5 DIA.’S ON COMMON CENTERS TO BE CONCENTRIC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8001-4103 Datasheet file may be downloaded here without warranties.

Datasheet ID: 8001-4103 517402