TRX10GDL0610C3
TRX10GDL0610C3 Datasheet
TRX10GDL0610C3 SFP+ LRM Module
| Part | Datasheet |
|---|---|
TRX10GDL0610C3 |
TRX10GDL0610C3 (pdf) |
| PDF Datasheet Preview |
|---|
| NUMBER GS-12-0984 TYPE Product Specification TRX10GDL0610C3 SFP+ LRM Module 1 of 16 AUTHORIZED BY J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Product Specification 10 GBd SFP+ 1310 nm LRM Linear Transceiver TRX10GDL0610C3 Product Features Hot pluggable SFP+ optical transceiver Programmable input equalizer Data rate transparent from to Gbps Low power consumption, W typ. Excellent EMI performance Transmission distance up to 220 m MMF 0 °C to +70 °C case operating temperature 1310 nm DFB laser Duplex LC connector Laser Class 1 RoHS 6/6 compliant Applications 10G Ethernet 10GBASE-LRM FCI’s SFP+ optical transceiver TRX10GDL0610C3 is a module for transmission over legacy multimode fibers. It complies with the SFP+ MSA specifications SFF-8431 and SFF-8432 and with 10GBASE-LRM per IEEE It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The sub-Watt power consumption and the excellent EMI performance allow system design with high port density. An adjustable input equalizer allows to overcome host board high frequency signal loss and to optimize module performance in interaction with a host board transmit equalizer. Supported Standards Application 10G Ethernet Standard IEEE 10GBASE-LRM Data Rate Gbps Copyright 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER GS-12-0984 TYPE Product Specification TRX10GDL0610C3 SFP+ LRM Module 2 of 16 AUTHORIZED BY J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Table of Contents Table of Contents 2 Functional Description 3 Electrical 4 Absolute Maximum Ratings 4 Recommended Operating Conditions 4 Low Speed Characteristics 4 SFI Module Transmitter Input 5 SFI Module Receiver Output Characteristics 5 Optical 6 General 6 Optical Transmitter 6 Optical Receiver 6 Application Information 7 Connector Pinout 7 Electrical Pin Definition 7 Application Schematics 8 Interfacing the 9 Digital Optical Monitoring 9 Tx Input Equalizer Adjustment 10 Programmability Feature Code 11 Passcode Entry and 11 Module Outline 12 Module Safety & Compliance 13 ESD & Electromagnetic 13 Eye 14 Ordering Information 15 Copyright 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER GS-12-0984 TYPE Product Specification TRX10GDL0610C3 SFP+ LRM Module 3 of 16 AUTHORIZED BY J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Functional Description The transmit path is based on an AC coupled 100 ohm differentially terminated driver coupled to a 1310 nm DFB laser. Laser output may be disabled by pulling the transmitter disable TX_DIS line high which is its default state when leaving the input floating due to an internal pull-up resistor. A fault condition is raised upon detection of an abnormal laser state. The receive path consists of a receiver optical sub-assembly ROSA for optical to electrical conversion, followed by a linear amplifier to boost the electrical signal. A loss of signal LOS status line provides information to facilitate easy link detection. Complete digital optical monitoring is implemented in compliance to SFF-8472 and made accessible via the 2-wire interface providing real time information about all important module parameters and status information. Copyright 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER GS-12-0984 TYPE Product Specification TRX10GDL0610C3 SFP+ LRM Module 4 of 16 AUTHORIZED BY J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Electrical Characteristics Absolute Maximum Ratings Rating Storage Ambient Temperature Powered Case Temperature Operating Relative Humidity Supply Voltage Range Conditions Non condensing Symbol Min Max Units VCCT/R Any stress beyond the maximum ratings may result in permanent damage to the device. Specifications are guaranteed only under recommended operating conditions. Recommended Operating Conditions Parameter Operating Case Temperature Power Supply Voltage DC Common Mode Voltage Conditions SFI Signals Ordering Information Application 10G Ethernet Standard IEEE 10GBASE-LRM Part Number TRX10GDL0610C3 Copyright 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER GS-12-0984 TYPE Product Specification TRX10GDL0610C3 SFP+ LRM Module 16 of 16 AUTHORIZED BY J. Blank 27 Apr. 2011 CLASSIFICATION UNRESTRICTED Initial version. Date 27 Apr. 2011 Copyright 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. |
| More datasheets: DAMD11C1PJK87 | 82V2054DA | 82V2054BBG | 82V2054BB | 82V2054DAG | BL-23F1-0246 | 76650-0042 | RAPID-NIEK V0004 | 0201BN180J500NGT | DCME27C2SN |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TRX10GDL0610C3 Datasheet file may be downloaded here without warranties.