17E18242

17E18242 Datasheet

17E-1824-2

Part	Datasheet
17E18242	17E18242 (pdf)

Related Parts	Information
17E18272	17E18272
17E18252	17E18252
17E18262	17E18262

PDF Datasheet Preview
ACCESSORIES Amphenol’s plated plastic backshell accommodates most standard and high-density D-Subminiature connectors and is appropriate for cable assemblies requiring compliance to FCC This version is highly durable and provides EMI/RFI protection. The rubber grommet compression insert forces the cable’s shielding against the inside of the cable exit area, assuring shielding. The 45° cable exit helps save space behind equipment. 45º Plated Plastic Backshell SPECIFICATIONS: Housing Material Plating Grommet Material Mounting Hardware: ABS Polymer Nickel over copper PVC UL 94 VO Steel, clear zinc ASSEMBLY INSTRUCTIONS Select the tightest insert that will over the cable and thread the cable through it, placing the end with the smaller O.D. the end without the washer towards the connector. Cut the jacket, fold the shielding back over the outside of the insert and cut it just short of the washer. Install jackscrews and connector. Place the washer in the outermost depression in the exit area of the hood and screw the cover closed. DIMENSIONS AND ORDERING INFORMATION Shell Standard # Size of Contacts Hi-Density # of Contacts Part # 17E-1824-2 17E-1825-2 17E-1826-2 17E-1827-2 Dimensions Cable Diameter Range Minimum Maximum TELEPHONE 416 754-5656 FAX 416 754-8668 E-MAIL:

PDF Datasheet Preview

ACCESSORIES

Amphenol’s plated plastic backshell accommodates most standard and high-density D-Subminiature connectors and is appropriate for cable assemblies requiring compliance to FCC This version is highly durable and provides EMI/RFI protection. The rubber grommet compression insert forces the cable’s shielding against the inside of the cable exit area, assuring shielding. The 45° cable exit helps save space behind equipment.
45º Plated Plastic Backshell

SPECIFICATIONS:

Housing Material Plating Grommet Material Mounting Hardware:

ABS Polymer Nickel over copper PVC UL 94 VO Steel, clear zinc

ASSEMBLY INSTRUCTIONS

Select the tightest insert that will over the cable and thread the cable through it, placing the end with the smaller O.D. the end without the washer towards the connector.

Cut the jacket, fold the shielding back over the outside of the insert and cut it just short of the washer.

Install jackscrews and connector. Place the washer in the outermost depression in the exit area
of the hood and screw the cover closed.
DIMENSIONS AND ORDERING INFORMATION

Shell Standard # Size of Contacts

Hi-Density # of Contacts

Part #
17E-1824-2
17E-1825-2
17E-1826-2
17E-1827-2

Dimensions

Cable Diameter Range Minimum Maximum

TELEPHONE 416 754-5656 FAX 416 754-8668 E-MAIL:

More datasheets: 416940020-3 | 356301022-3 | 356301021-3 | 416040010-3 | 416013900-3 | 416100120-3 | 416100520-3 | 17E18272 | 17E18252 | 17E18262

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 17E18242 Datasheet file may be downloaded here without warranties.

Datasheet ID: 17E18242 517368