T9600-L

T9600-L Datasheet


T9600

Part Datasheet
T9600-L T9600-L T9600-L (pdf)
PDF Datasheet Preview
GE Measurement & Control

T9600

The Fully Calibrated Humidity and Temperature Module
• Ready to install package
• Simultaneous relative humidity and temperature
outputs
• Precision accuracy ±2% RH, ±0.6°C
• Resolution RH
• Factory calibrated, ready to use
• Supply voltage 3.0V to 5.5V
• Low current 25°C
• Conformal coated PCB for corrosion protection
• Included filter to protect humidity element
• RoHS CE compliant

Fully Calibrated Humidity and Temperature Sensor

The T9600 series humidity sensor by GE offers a new standard in the field of accurate relative humidity measurement. Based on a capacitive polymer sensing technology, this device offers signal conditioning and temperature compensation for a single SoC SystemonChip solution. The device is very simple to use, fully tested and calibrated for accuracy on further calibration is needed. T9600 can be incorporated into an OEM solution to meet customer specifications. The measurement is accurate to ±2% from 20% to 80% RH and ±3% across the entire humidity range. Long term stability is excellent. The temperature accuracy is ±1°C from 0°C to +70°C. Dual outputs provide humidity and temperature as 0V to 1V, or available with digital output the ZACwire one-wire interface .

Accurate, Repeatable Humidity and Temperature Measurement

Small Package for OEM Assembly

T9600 contains the entire signal conditioning circuitry on a single silicon die. The sensor and circuitry are integrated into a small footprint package, ready for OEM integration.

Digital Interface

RH Sensor
1 Vsupply 3V to 5.5V

NC ChipCap

OUT-RH

OUT-T

T9600 provides either analog or digital interfaces in a single package. The package is highly resistant to chemical vapors and other contaminants. T9600 sensors are precalibrated and offer high interchangeability. They also fully recover from condensing environments and may be used across a wide range of both temperature and relative humidity ranges.

T9600 relative humidity sensors change capacitance in direct proportion to ambient relative humidity. An internal solid-state band gap provides temperature measurement. This integral design reduces overall cost and complexity and improves reliability.
4 Gnd 2

Analog Interface

Sensor
1 Vsupply 3V to 5.5V

ChipCap

RH Output

Temp Output

NC OUT-RH

OUT-T

Gnd 2

Linear mode %RH = Vout * 100 Tc = Vout * 200 -50

T9600 Specifications

Relative Humidity

RH Sensor Planar Capacitive Polymer

RH Range 0 to 100% RH

RH Accuracy 25°C ±2% from 20% to 80% ±3% from 0% to 20% and 80% to 100%

RH Resolution RH

Temperature

Temperature Sensor Integral band gap PTAT

Operating Temperature -20°C to 80°C

Storage Temperature -40°C to 80°C

Temperature Accuracy ±0.6°C at 25°C

Temperature Resolution 0.2°C
Ordering Information

Model T9600-L

T9600-D

Part Description

ChipCap RH and Temperature Sensor, 0-1VDC Linear Output

ChipCap RH and Temperature Sensor, Digital Output

Absolute Maximum Ratings

Symbol Parameter

Min.

DC Supply Voltage

Voltage at all Analog and

Digital I/O pins

Ambient Temperature
operation

Tstrg Storage Temperature

Max.

Units Notes

Vdd + V

Recommended Operation Conditions

Symbol Parameter

Analog DC Supply

Supply Current

Analog Ground

Ambient Temperature

Cvdd

Included Capacitance between Vdd and Vss

Digital Output Load only
capacitive, no resistive

Analog Output Load

Capaictance

Analog Output Load

Resistance

Min. Typ.
-20 27 100 220

Max. Units Notes V
uA 25°C V 80 °C 470 nF
100 pF

RED WIRE

M3 CLEARANCE HOLE

Red V+

OUT-T OUT-RH
More datasheets: EP1S80B956C6AB | EP1S80F1020C7GA | EP1S80F1020C7NGA | EP1S80F1020I7NGA | EP1S80F1508C6AA | EP1S80F1508I6 | EP1S60F1020I6GB | EP1S40F1508C6NGA | 42104R | 42105R


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived T9600-L Datasheet file may be downloaded here without warranties.

Datasheet ID: T9600-L 517590