1100.06.030

1100.06.030 Datasheet


110 51 20

Part Datasheet
1100.06.030 1100.06.030 1100.06.030 (pdf)
Related Parts Information
8000.32 8000.32 8000.32
1000.1/2NPT.080 1000.1/2NPT.080 1000.1/2NPT.080
1100.09.060 1100.09.060 1100.09.060
1183.17 1183.17 1183.17
1183.2 1183.2 1183.2
1100.07.080 1100.07.080 1100.07.080
1100.13.150 1100.13.150 1100.13.150
1000.1/2NPT.110 1000.1/2NPT.110 1000.1/2NPT.110
1100.12.050 1100.12.050 1100.12.050
1000.1/8NPT.060 1000.1/8NPT.060 1000.1/8NPT.060
1000.1/4NPT.050 1000.1/4NPT.050 1000.1/4NPT.050
1100.07.065 1100.07.065 1100.07.065
1100.17.060 1100.17.060 1100.17.060
1100.09.105 1100.09.105 1100.09.105
1100.11.085 1100.11.085 1100.11.085
1000.1/8NPT.040 1000.1/8NPT.040 1000.1/8NPT.040
1000.1/4NPT.080 1000.1/4NPT.080 1000.1/4NPT.080
1000.1/2NPT.150 1000.1/2NPT.150 1000.1/2NPT.150
1000.3/4NPT.125 1000.3/4NPT.125 1000.3/4NPT.125
1000.3/4NPT.205 1000.3/4NPT.205 1000.3/4NPT.205
1100.07.050 1100.07.050 1100.07.050
1000.3/8NPT.080 1000.3/8NPT.080 1000.3/8NPT.080
1100.06.035 1100.06.035 1100.06.035
1100.10.060 1100.10.060 1100.10.060
1100.08.035 1100.08.035 1100.08.035
1100.10.040 1100.10.040 1100.10.040
1100.12.065 1100.12.065 1100.12.065
1100.09.080 1100.09.080 1100.09.080
1100.09.045 1100.09.045 1100.09.045
1100.17.080 1100.17.080 1100.17.080
1100.11.120 1100.11.120 1100.11.120
1100.13.080 1100.13.080 1100.13.080
1100.17.105 1100.17.105 1100.17.105
1100.08.050 1100.08.050 1100.08.050
1100.12.080 1100.12.080 1100.12.080
1100.06.025 1100.06.025 1100.06.025
8000.1 8000.1 8000.1
8011 8011 8011
8000.17 8000.17 8000.17
8009 8009 8009
8016 8016 8016
8000.2 8000.2 8000.2
8021 8021 8021
8029 8029 8029
8000.12 8000.12 8000.12
8000.08 8000.08 8000.08
8000.25 8000.25 8000.25
8007 8007 8007
8000.06 8000.06 8000.06
8013 8013 8013
1100.13.110 1100.13.110 1100.13.110
1100.17.045 1100.17.045 1100.17.045
1100.11.055 1100.11.055 1100.11.055
1100.20.110 1100.20.110 1100.20.110
1100.20.150 1100.20.150 1100.20.150
1100.16.080 1100.16.080 1100.16.080
1100.16.150 1100.16.150 1100.16.150
1100.20.080 1100.20.080 1100.20.080
1100.16.110 1100.16.110 1100.16.110
1000.3/8NPT.060 1000.3/8NPT.060 1000.3/8NPT.060
1000.1NPT.210 1000.1NPT.210 1000.1NPT.210
1000.1NPT.255 1000.1NPT.255 1000.1NPT.255
1100.21.160 1100.21.160 1100.21.160
1000.1/4NPT.065 1000.1/4NPT.065 1000.1/4NPT.065
1000.3/8NPT.045 1000.3/8NPT.045 1000.3/8NPT.045
1000.3/4NPT.160 1000.3/4NPT.160 1000.3/4NPT.160
1000.3/8NPT.105 1000.3/8NPT.105 1000.3/8NPT.105
1183.12.065 1183.12.065 1183.12.065
1100.25.125 1100.25.125 1100.25.125
1100.25.160 1100.25.160 1100.25.160
1183.12.050 1183.12.050 1183.12.050
1100.21.125 1100.21.125 1100.21.125
1000.1NPT.170 1000.1NPT.170 1000.1NPT.170
1100.21.205 1100.21.205 1100.21.205
1100.32.170 1100.32.170 1100.32.170
1100.32.255 1100.32.255 1100.32.255
1183.25 1183.25 1183.25
1100.29.190 1100.29.190 1100.29.190
1100.29.230 1100.29.230 1100.29.230
1100.29.275 1100.29.275 1100.29.275
1183.32 1183.32 1183.32
1100.25.205 1100.25.205 1100.25.205
1100.32.210 1100.32.210 1100.32.210
PDF Datasheet Preview
Cable Grips

Cable Grips secure cables to control cabinets or junction boxes providing strain relief and protection from the elements. They are made of metal nickel plated brass or plastic nylon . Advantages exist for both types of cable grip with the nylon versions becoming more popular since they can provide the same level of protection against dust, debris and water as the metallic versions for less cost and weight. Cable Grips are specified first by the cable diameter and second by thread type.

Cable Grips are available in three different thread types, PG Panzer Gewinde, a German specified thread widely used in Europe , Metric and NPT National Pipe Thread used in USA . This is useful since most specifiers thread the cabinet holes so that the cable grip can be screwed into it for a more secure fit. Others simply knockout a hole and place the cable grip inside it.

Our Cable Grips are approved by UL and Lloyds of London and are rated IP 68, the highest Ingress Protection available. Ingress Protection consists of two numbers the first between 0 and 6, indicating the resistance to particles and the second between 0 and 8, indicating resistance to water. Please see our charts on pages 164 and 165 explaining the IP system.

Table of Contents - Cable Grips

Nickel-Plated Brass Metric 166-170 202 Pg 171-174 203 NPT 175 Gas Threads 175 High Temperature Applications 177-180 Multiple Cables 181-184 No Drilled Holes 185-186 Flat Cables 187-189

Special Entry Thread 190-191

Anti-Kink/Nozzle/Spring/Clamps 190-197

Trumpet 198-201

Stainless Steel 202-205 Stainless Steel Acid Resistant 206-207

Elbows 208-211
45 Degree 212-213

DIN 46320-C4-MS 214

Anti-Kink Nozzle and Clamps 215

Electro-Magnetic Compatibility EMC Shield Grounding 216-229

American Electrical
• 456 Southlake Blvd.
• Richmond, VA 23236

• fax


Table of Contents - Cable Grips

Nylon Neoprene Seal -30-100°C 230-235 Anti-Kink 236-239 Elbows 240-241

Locknuts 242-247

Reducers / enlargers / adapters Nickle-plated Brass 248-257 Nylon 258-261

Locking Plugs 262-266

O Rings 268-271

Cross Reference Heyco and Olflex 272-273

American Electrical
• 456 Southlake Blvd.
• Richmond, VA 23236

• fax


Cable Grips
main features Cable Grips
1 Wider domed nut which can not be over-tightened.

The wide dome design allows space for the neoprene seal to form a tight grip on the cable, forming an IP68 barrier. please refer to Ingress Protection [IP] ratings on the back page.
2 Generous deep flats

The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.
3 Spacer

A small spacer exists between the domed nut and the locking collett, providing an additional seal when fully tightened.
4 Neoprene rubber seal

This seal grips around the cable to form the IP68 barrier when properly tightened.
5 Webs are staggered for better grip

Webs are designed in an alternating geometry which enhances gripping capability.
6 Staggered webs

The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.
7 Sprung webs

The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.
8 Retention springs for domed nut
More datasheets: 1100.10.040 | 1100.12.065 | 1100.09.080 | 1100.09.045 | 1100.17.080 | 1100.11.120 | 1100.13.080 | 1100.17.105 | 1100.08.050 | 1100.12.080


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1100.06.030 Datasheet file may be downloaded here without warranties.

Datasheet ID: 1100.06.030 517184