AOZ8033
Part | Datasheet |
---|---|
![]() |
AOZ8033DIL (pdf) |
PDF Datasheet Preview |
---|
AOZ8033 4-Line EMI Filter with Integrated ESD Protection The AOZ8033 is an 4-line device integrating EMI filtering with ESD protection for each line. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic discharge ESD protection in portable electronic equipment. This state-of-the-art device utilizes AOS leading edge Trench Vertical Structure [TVS]2 technology for superior clamping performance and filter attenuation over the full operating display range. The AOZ8033 has been optimized for protection of color LCD displays and CCD camera lines in cellular phones and other portable consumer electronic devices. The AOZ8033 consists of four identical circuits comprised of TVS diodes for ESD protection, and a network for EMI/RFI filtering. A series resistor value of 100 and a capacitance value of 28pF are used to achieve -35dB minimum attenuation from 800MHz to 3.0GHz. The TVS diodes provide effective suppression of ESD voltages in excess of ±20kV air discharge and ±20kV contact discharge . This exceeds IEC 61000-4-2, level 4 ESD immunity test. The AOZ8033 comes in an RoHS compliant, 1.2mm x 1.8mm, 0.4mm pitch DFN package and is rated over a -40°C to +85°C ambient temperature range. ● 4 lines for EMI filtering and ESD protection Exceeds IEC 61000-4-2, level 4 ESD immunity test ±20kV air discharge and ±20kV contact discharge ● Trench Vertical Structure [TVS]2 based technology used to achieve excellent ESD clamping & filter performance over the full operating display range ● Filter performance -35db attenuation from 800MHz to 3.0GHz ● Low operating voltage 5.0V ● Capacitance stability over wide range of voltages and temperatures ● DFN package 1.2mm x 1.8mm, 0.4mm pitch ● Pb-Free device ● EMI filtering and ESD protection for data lines ● LCD displays, camera interface, I/O interface ● Portable handheld devices, cell phones, PDA phones D0 CH1 D1 CH2 D2 CH3 D3 CH4 100Ω 28pF 28pF 100Ω 28pF 28pF 100Ω 28pF 28pF 100Ω 28pF 28pF LCD/Camera Module Figure 1 Page 1 of 7 AOZ8033 Ordering Information Ambient Temperature Range AOZ8033DIL -40°C to +85°C Package DFN-8 Environmental RoHS Compliant Green Product All AOS products are offered in packages with Pb-free plating and compliant to RoHS standards. Parts marked as Green Products with “L” suffix use reduced levels of Halogens, and are also RoHS compliant. Please visit for additional information. Pin Configuration Exposed Pad GND DFN-8 Bottom View Top View Pin Description Pin Number 1, 8 2, 7 3, 6 4, 5 Exposed Pad Pin Name CH 1 CH 2 CH 3 CH 4 GND Pin Function Channel 1 Connections Channel 2 Connections Channel 3 Connections Channel 4 Connections Common Ground Connection Page 2 of 7 AOZ8033 Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating Storage Temperature TS ESD Rating per IEC61000-4-2, contact 1 ESD Rating per IEC61000-4-2, air 1 ESD Rating per Human Body Model 2 -65°C to +150°C ±20kV ±20kV ±30kV IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5k. Electrical Characteristics TA = 25°C unless otherwise specified. Parameter VRWM VBR IR VCL Total Series Resistance Cut-off Frequency Attenuation from 800MHz to 3.0GHz Attenuation from 800MHz to 3.0GHz IT = 1mA 4 Conditions VRWM = 3.3V ILOAD = 1A, positive clamp 5 6 ILOAD = 1A, negative clamp 5 6 ILOAD = 5A, positive clamp 5 6 ILOAD = 5A, negative clamp 5 6 ILOAD = 12A, positive clamp 5 6 ILOAD = 12A, negative clamp 5 6 |
More datasheets: 1833 | FST162861MTDX | SA638 | EBM7BV060H | NFS110-7924 | NFS110-7912 | NFS110-7904P | NFS110-7915 | NFS110-7901P | TCP12P |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AOZ8033DIL Datasheet file may be downloaded here without warranties.